Jump to content

HMS Pegasus by realworkingsailor - Amati/Victory Models - 1/64


Recommended Posts

Well... this might take some doing... Although it's a shame to be starting all over again, at least the platform is still here. I don't remember a thing I wrote over the last 11 months or so, but I have all my photos. I'll cherry pick the best that illustrate my progress, avoinding the pointless ones....(I hope :P;)

 

So this first post should go from the completion of the frame to the completion of the first planking.

 

I'll keep the blah-blah short so if there are any questiong, just let me know...

 

Andy

post-34-0-47279300-1360953189_thumb.jpg

post-34-0-94743200-1360953220_thumb.jpg

post-34-0-32440200-1360953244_thumb.jpg

post-34-0-97883200-1360953275_thumb.jpg

post-34-0-40309700-1360953319_thumb.jpg

post-34-0-48016600-1360953738_thumb.jpg

post-34-0-45618700-1360953741_thumb.jpg

post-34-0-77841800-1360953755_thumb.jpg

post-34-0-77962900-1360953877_thumb.jpg

post-34-0-29991600-1360953881_thumb.jpg

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites

Part two starts off with attaching the stern counter pattern and carries on through the second planking, the main wales and the start of the inner bulwark planking

 

Andy

post-34-0-60388900-1360954062_thumb.jpg

post-34-0-65402300-1360954066_thumb.jpg

post-34-0-41897000-1360954070_thumb.jpg

post-34-0-73840200-1360954073_thumb.jpg

post-34-0-74590200-1360954076_thumb.jpg

post-34-0-00298200-1360954080_thumb.jpg

post-34-0-72188200-1360954083_thumb.jpg

post-34-0-81670700-1360954184_thumb.jpg

post-34-0-91401500-1360954187_thumb.jpg

post-34-0-21505200-1360954191_thumb.jpg

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites

Part Six.. completion of the head timbers and fo'c'sle deck fittings. Installing the canons under the quarterdeck as well as the deck beams, followed closely by the quarter deck. Intallation of the rudder and tiller, more canons in the waist (fully rigged this time) and the figure head.

 

Andy

post-34-0-58141000-1360955081_thumb.jpg

post-34-0-97051400-1360955088_thumb.jpg

post-34-0-70976200-1360955093_thumb.jpg

post-34-0-97449600-1360955097_thumb.jpg

post-34-0-29986000-1360955102_thumb.jpg

post-34-0-94660300-1360955108_thumb.jpg

post-34-0-83960200-1360955127_thumb.jpg

post-34-0-53253300-1360955130_thumb.jpg

post-34-0-92869300-1360955178_thumb.jpg

post-34-0-20106000-1360955181_thumb.jpg

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites

Part 7 should take us to just shy of the present time. I'll have to take a few more photos of my latest progress... whereupon I will try to resume my lost narative... or something....

 

Andy

post-34-0-24426100-1360955322_thumb.jpg

post-34-0-00355600-1360955327_thumb.jpg

post-34-0-86342200-1360955333_thumb.jpg

post-34-0-99461600-1360955337_thumb.jpg

post-34-0-94085300-1360955346_thumb.jpg

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites

Hello Andy,

Never mind you don't remember what you wrote.

 

Pictures often say more than words.

 

Take care,

 

Anja

Thanks Anja ;)

 

I would be here for many more hours if I tried to put up every single photo I've taken. Nothing will ever do justice to what has been lost, but just the same, we're all rebuilding together :)

 

Hope to see some photos of your build soon too.

 

Andy

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites

Sorry Andy,

 

Just deleted my post and wanted to repost it after you had finished uploading your pictures. But you quoted me, so I won't. Hope to get my buildlog and pictures up and running on sunday.

 

Sjors is keeping our PC busy with his buildlogs. And it's a real pain to do this on my IPad.

 

Thanks for posting all your pictures and take care,

 

Anja

Those we loved but lost are no longer where they were, but are always where we are.


In the gallery: Albatros 1840 - Constructo

Link to comment
Share on other sites

Thanks Andy for re-posting - your log was one I was following as I start my HMS Fly soon.

 

Long live MSW!!!

 

Cheers

Alistair

Cheers

Alistair

 

Current Build - HMS Fly by aliluke - Victory Models - 1/64

https://modelshipworld.com/topic/34180-hms-fly-by-aliluke-victory-models-164/

Previous Build  - Armed Virginia Sloop by Model Shipways

 

Previous Build - Dutch Whaler by Sergal (hull only, no log)

 

Link to comment
Share on other sites

Link to comment
Share on other sites

Happy to see you back, Andy.  We're all in that same boat with buildlogs and many are taking the "Management Summary" approach. :)

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Thanks everyone! :D

 

Since I had all my photos at hand, it really didn't take very long to sort through and post the best ones (the ones I considered, anyway). If anyone has any questions regarding the build, or photos I didn't post, or whatever, don't hesitate to ask.

 

The good news is that I should be posting a proper update tomorrow, which means I'll be going forward again.

 

Andy

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites

Glad to see you back Andy.  She looks even better this time around!!!!!!

Augie

 

Current Build: US Frigate Confederacy - MS 1:64

 

Previous Builds :

 

US Brig Syren (MS) - 2013 (see Completed Ship Gallery)

Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery)

Victory Cross Section (Corel) - 1988

Essex (MS) 1/8"- 1976

Cutty Sark (Revell 1:96) - 1956

Link to comment
Share on other sites

Hi Andy:

 

I passively followed along with your Pegasus log before and am glad to revisit it here in "fast forward" - beautiful work!

hamilton

current builds: Corel HMS Bellona (1780)
 
previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); 
MS Glad Tidings (1937) (in need of a refit)HMS Blandford (1719) from Corel HMS GreyhoundFair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851)Bluenose fishing schooner (1921) (scratch)
 
under the bench: Admiralty Echo cross-section; MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy

Link to comment
Share on other sites

Nice to see it back up!  I enjoyed watching this go along - it is absolutely amazing!!

 

-Adam

-Adam

 

Current Builds

Santa Maria - Artesania Latina (1:65) POB

MayFlower - Model Shipways (5/32"=1') POB
Blue Shadow - Mamoli Revolutionary War Brigantine. (Fict) (1:64) POB (Recommissioned as the Kara June)

 

On The Shelf Waiting so Patiently

USRC Ranger - Corel (1:50) POB

18th Century Longboat - Model Shipways (1:4) POF

La Nina - Artesania Latina (1:65) POB

U.S Brig Syren - Model Shipways (1:64) POB

 

Completed Builds

Phantom NY Pilot Boat - Model Shipways (1:96) Solid Hull

 

Decommissioned Builds
(Time and conditions were not good to these. They have been cancelled =( )

Willie L Bennett - Model Shipways (1:32) POF
USRC Harriet Lane - Model Shipways (1:128) Solid Hull

 

Link to comment
Share on other sites

Hi Andy,

 

And you are telling me that I goes quick with my build….

I think we all have eat turbo's at breakfast  :D

I'm glad that you are also back!

 

Sjors

Edited by Sjors
Link to comment
Share on other sites

I'm glad to see you and your Pegasus back on board. I was thinking of a new idea for all of us since we all have so many pictures of our builds. When we do this in the future we should be always taking a progress shot from the same side and angle and then when it has completed we can compile the pictures into a flip book and the ship will 'magically' create itself.  :D I think I read earlier that this build log was recreated using your Iphone? That's more tedious than any treenailing job I've ever seen.

Thanks,

 

Patrick

 

YouTube Channel for fun: Patrick's Scale Studio

Finished: Model Shipways US Brig Niagara

Current: I Love Kit USS Curtis Wilbur DDG-54

 

"Tomorrow is the most important thing in life. Comes into us at midnight very clean. It's perfect when it arrives and it puts itself in our hands. It hopes we've learned something from yesterday"

- John Wayne

Link to comment
Share on other sites

So many new people following along.... :)

 

Hamilton.. Who were you before the crash? I'm seeing a few people modifying their usernames (just to add to the confusion :P)

 

Joe and Adam: thanks so much for stopping by again.

 

Sjors.. Call it Dutch stubbornness if you want... Far be it for a little thing like a server crash to keep us from forging on ahead

 

Patrick: Egad no:P I was just referring to Anja's remark about following along with her IPad...

 

Sherry, thanks for stopping by. I quietly followed your Mayflower log, you did a good job on her. What part of the province do you hail from?

 

Anyway, I'll be taking some photos of my progress shortly, and will have a proper update soon after.

 

Andy

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites

And here we go... ;)

 

I don't know if this is the first log to officially post progress, as opposed to just playing catch up...  (not that it really matters) I think the biggest hit for me was the loss all the old logs of completed builds. There was so much information out there to enable me to double or triple check how certain pieces went together. Up until this morning I felt like I was about forge on into the dark alone.. :mellow: ..but I see a couple other recovered Pegasus/Fly logs... which is not altogether discomforting. ;)

 

To keep it short, a brief summary of everything completed since the last photos. I've installed the gallows and pump handles. (I also made sure to install the blocks and eyebolts around the base of the main mast before hand so I don't have to dive in there later. Started work on the stantions around the ladders. Also have finished the gunport lids and channels. And while I was waiting for the paint to dry, I stropped all the deadeyes (just for something tedious to do :P).

 

I figure I'll work on the snaggly stuff from the inside out. So I have to go after a few eyebolts and get them installed, before I finish off the hammock cranes.

 

The only unfortunate thing (as far as model building goes) is my company is sending me on a training course next week, in Newfoundland... and because of crappy weather, I'll be leaving tonight (ahead of the winter storm). And then the week after is the winter meeting in Montreal. I'll be around on occaision, but building will be on hold ... again... :rolleyes:

 

Andy

post-34-0-26701700-1361037296_thumb.jpg

post-34-0-45712900-1361037300_thumb.jpg

post-34-0-13516700-1361037304_thumb.jpg

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites


 

Hi Andy

 

:722972270:


Great to be and have you back again.

 

Good Idea, that fast motion log.

 

It is too bad about all those lost information which came forward during all the detailed discussions. Well, again, John Lennon must have had a  presentiment: …  it’ll be (just like) starting over…


Newfoundland in winter for training sessions… I still like  m y  company better – although I had some training sessions in Kangerlussuaq, Greenland, but those were only in the simulator and that was standing in Zurich!



Take care!


Cheers

 Peter



 

Link to comment
Share on other sites

I take it you have been there? :P

 

I'm not the only one with the "speed log" thing going, at least it's getting things up and running again....even if it is a bit chaotic on the boards right now. I'm sure that when we've all got ourselves back to where we were, things will settle down.... I hope ;)

 

Andy

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Link to comment
Share on other sites

Hi Andy..... glad to see you'er back up and running..... your work is outstanding ,I don't post all the time .but I do look in quite often.

Frank

completed build: Delta River Co. Riverboat     HMAT SUPPLY

                        

                         USRC "ALERT"

 

in progress: Red Dragon  (Chinese junk)

                      

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...