Jump to content

Sovereign of the Seas 1637 by md1400cs - Sergal - 1:78 - to be hopefully bashed


Recommended Posts

Hi Mates.

I have wanted to build this kit for a long time, I will also attempt to super detail this project beyond the “out of the box” kit – as excellent as it is. I have “bashed" my two last builds – enjoy the challenges of added detailing -- I have the McKay book that is filled with many line drawings and images; it will be an excellent guide. Along with incorporating great ideas seen in other build logs of this ship here at MSW.

 

I recently acquired a 1980s “new in box” kit from a member who had one available. He contacted me after I had made a request for one here at MSW.

 

That specific vintage kit was of interest to me because the 650+ included decorative bits were all cast in solid bronze (that number includes cannons). The current kit is supplied with 650+ white metal bits that have been electroplated, and apparently, from what I’ve been told, may result in some lost of casting details??  (TBD) – many other advantages are certainly in the current kit’s box as well, and not part of the 1980s box contents.

 

Given that this ship’s beauty, for-all-intent-and-purposes, was because of its 600+ ornamentations I got intrigued with the idea of solid bronze castings; luckily found one (Big thanks Jay L)

That said, instructions were really non-existent, included lumber still looked very good, other included kit’s amenities were, well from three decades ago. Bronze sculptures were, for me, the prize….as well as the 1:1 plan sheets (nice) only in Italian.

 

Jay's kit did not have a single super tiny missing bronze ornament – all were mixed up in 15 or so zip lock baggies – took hours to go through them all –haha. all other parts were 100% there as well.

 

Moving forward two weeks – a large heavy UPS box arrived at my door hmm? – Turns out that I was gifted, for Father’s Day, with the current Sergal #787. So best of both kits will be blended into this single project. My family did not know that I had already purchased a much earlier edition. The current kit certainly has its many advantages, but the earlier kit shines in many ways as well, many of which will become part of this project.

 

I will balance this log with some, as needed, comparisons between the old and new kit versions – No criticisms of either just occasional comparisons. That said, this log will focus on the build as it goes forward. I am lucky to have the best of both available for this project.

 

PS: I have listed this log as a 1637 ship – I know that she was around for many decades after, and that her stern ornamentation (provided in both kits) is more reflective of a much later example. But for builders 1637 is the “agreed to” year.

 

First log entry with some notes. – will also (thankfully for you) keep the writing to a minimum going forward.

Thanks for looking in, and if you are interested Welcome to the shipyard.

 

Regards,

 

1.jpg.933c86b2310a228762d508df0b0d9aaa.jpg2.jpg.f7f8192c5381a724e28f0762fb6f5af3.jpg3.jpg.6c1d8fba5a1b5ba62ce621b1be2935f8.jpg4.jpg.85189c24f06c7abe504affe2dce56c18.jpg5.jpg.dced139403a14f7603ec78d8362b1e52.jpg6.thumb.jpeg.0c574af16d42ec97260344519925f2ec.jpeg7.jpg.bc7e66b6981b86c0e7d443dbaa700ef6.jpg8.jpg.c18bfedd7ae76eb5b144fcda1a4d8612.jpg9.thumb.jpg.e07b87abb554fd700a8d0515cb5879e5.jpg10.jpeg.1242ae76e057283f37a96feffeb84f58.jpeg11.jpg.6106c608cf706bc1a9b67a7b5e6cfabb.jpg12.jpeg.2b4ffdc0ecbf7a3acd0a6859297eaf73.jpeg13.jpg.f72aaf10ab1ff7afe22fbcadd1481959.jpg15.jpeg.5bd831d8a575e6090c43258856992826.jpeg16.jpg.0a60afc2ec114d55df9909d0b0978e85.jpg

 

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

I am in the 2nd row and following.

Great start 👍

Regards, Patrick

 

Finished :  Soleil Royal Heller 1/100   Wasa Billing Boats   Bounty Revell 1/110 plastic (semi scratch)   Pelican / Golden Hind  1/45 scratch

Current build :  Mary Rose 1/50 scratch

Gallery Revell Bounty  Pelican/Golden hind 1/45 scratch

To do Prins Willem Corel, Le Tonnant Corel, Yacht d'Oro Corel, Thermopylae Sergal 

 

Shore leave,  non ship models build logs :  

ADGZ M35 funkwagen 1/72    Einhets Pkw. Kfz.2 and 4 1/72   Autoblinda AB40 1/72   122mm A-19 & 152mm ML-20 & 12.8cm Pak.44 {K8 1/2} 1/72   10.5cm Howitzer 16 on Mark. VI(e)  Centurion Mk.1 conversion   M29 Weasel 1/72     SAM6 1/72    T26 Finland  T26 TN 1/72  Autoprotetto S37 1/72     Opel Blitz buses 1/72  Boxer and MAN trucks 1/72   Hetzer38(t) Starr 1/72    

 

Si vis pacem, para bellum

 
 
Link to comment
Share on other sites

Another large build! Looking forward to seeing what you do with this one. I'm sure that having two of these kits will provide you with lots of good options and the enviable, "2nd chance" parts in case of mistakes. Good luck!

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

Nice start on your build.  She is going to be a big one.

 

Ryland

 

Member - Hampton Roads Ship Model Society

            - Ship Model Society of New Jersey

               - Nautical Research Guild

       

 

Current Build - Armed Virginia Sloop, 18th Century Longboat

Completed Build - Medway Longboat

Link to comment
Share on other sites

Hi mates,

Thanks for your interest in following along - very much appreciated. And thank as well for dropping by - 

 

PS: Ryland big indeed!!.  1:1 sheet from vintage kit - next to Corel 1/75 Wasa 

 

No long text images include notes. (need to make adjustments to my signature)

Regards, 

 

1.jpg.99022bc194b7fde671d29e3799d9fc55.jpg2.jpg.e4ece038b349db5e9f990adf22d60a82.jpg3.jpeg.eeb05cee0a08280244a24d6089fe4755.jpeg4.jpg.9747d01a4c68e0460149b25c064ef6d1.jpg5.jpeg.a95a7a4177e309e21a638b84b14a1dfa.jpeg6.jpg.b426c12922e54fb5a83a2f3669e05871.jpg7.jpg.a2f5b82052f8ecab6beb53ae4d753a09.jpg

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

This will be good, are you going to build her with the Flat Bulkheads  seen in some drawings or the rounded ones?

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

OC: to be determined – Are you asking about the round tuck at stern controversy?

Marc: thanks indeed – big welcome aboard

Eilelwen: thanks as well!

 

Moving forward – adding dummy carriages in upper and lower gun decks (48). Needed to do this for upper gun deck first before installing the lower gun deck templates – this allows for room to work from under. That done; Now, I can install the two lower gun deck templates, pre-drill the cannon holes then add carriages as was done above.

Thanks for dropping by, comments, and thanks so much for your interest in following along this new log.

 

Regards,

 

1.jpeg.63801302d99ec981a9e46336592c4531.jpeg2.thumb.jpeg.7b344ad90c9c02bbd9f803abcd23181a.jpeg3.thumb.jpeg.ffb5ab7db8269f3f4e228ccc4ec75d06.jpeg4.thumb.jpeg.b7a0025c6e82a25d89cd3e659f761e7b.jpeg5.thumb.jpeg.d6259922ad3eec16fb7c285895e45930.jpeg6.jpg.73bbfdeb82257dfc0d2788f500aa25e0.jpg

 

7.jpg.5c5020d6e1c29be1165064b2359f05d0.jpg8.thumb.jpg.ea57d0778005362c2f42af3bf0fbd5c0.jpg

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

I have seen some diagrams and drawings of her  showing flat bulawrks between decks  and not the curved / rounded  profiles, not sure it the difference is from a modification to her  or just confusion.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

  • 2 weeks later...

First I want to share an easy “for me” mistake. For any of you planning on this kit – well here was the error. I was not paying much attention when placing the number 4 & 5 hull frames over the current kit provided outline sheet. Both looked identical and just flopped them into place. Well it turns out that #5 is 2.5mm on each side larger than #4 – makes sense Now!   did not even see/notice that!

 

When I hammered all of them into their slots, but I reversed 4 & 5. Now wanting to install the lower gundeck templates – a big “unnatural” curve caused issues. Images included below. So mates be more cautious than me.

==================================

Installed starboard lower gun deck. Added trim pieces as well. Almost finished the port side as – next will need to drill dummy cannon holes and add the dummy carriages as well.

 

Thanks for you kind visits…..

 

1.jpg.4e4e46a8fe28d30f72fbcc81865e0c18.jpg2.jpg.2e384267f0ca66a9c3959741e73375b5.jpg3.jpg.03eeff7163ef7ede1d8611f413b634f6.jpg4.jpeg.74ef584f116d3bf4878c80f23b647179.jpeg5.jpeg.93910edc0a0f533b81f969d735904a17.jpeg6.jpeg.e9f6926d409e90efa1180f13bb5f47c3.jpeg7.jpg.e2593ac0ab2bb6772edd0f02a01fef7d.jpg8.jpg.6520e3c0bfda0c8c7d2b5098d9bba9ee.jpg9.jpg.5d93b3a47e893171f03b58fd71ddde40.jpg10.jpeg.cd6934fc4d8bec9c5651da198e0612b4.jpeg11.jpeg.5fce1a3bd847e7e478171f81af3e02ab.jpeg

 

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

well done, but that is a lot to go wrong, making all those gunports away from the build

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 

 

 

HMHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   U552 German U Boat - Trumpeter - 1/48  Amerigo Vespucci     1/84 - Panart-   HMS Enterprise  -CAF -  1/48     

Finished     

St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished   Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Link to comment
Share on other sites

Kevin,

 

Thanks - welcome aboard as well appreciated - Yes, those gunport frames have been a bit of a chore. I've had other issues as well (lot's can go wrong indeed) - no point in wasting members time with my frustrations - But almost done with these.

 

Later on - way later - I think that I also want to explore offsetting the bowsprit mast, as it should be, given how far forward the foremast is set. I took some time away from the hull - and put together a bowsprit deck section (based on a centered mast (per the kit) - will need to revisit that partial work as well, and figuring out how to securely place the mast. Should have done that before installing the gun deck bits -

 

830534233_IMG_1721copy.thumb.jpg.273fb9492b93cd56a23f70d862e24bc4.jpg329826900_IMG_3313copy.jpeg.4c554385a331b1874f676a565912439c.jpeg6814427_IMG_1750copy.jpg.94e29ecdb4b27b2d5b7bb3f83eee7b93.jpgIMG_3267.jpeg.45e25ad0e2eb7364bb5b5424b9f38e7d.jpeg

 

 

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

What I mean is the bulkhead on the decks between each deck, on a couple of pics on the net I have seen this shown as flat across the front  from port to starboard as apposed to the rounded  profiles where the canons point out facing forwards on the decks.

 

This is one of the pics on the net showing flat bulkheads.

 

OC.

hms sovereign of the seas 02.jpg

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

OC.,

Now totally understand your previous questions – sorry for not correctly responding. Nice painting BTW thanks for posting . So mentally still working the bulkhead details out, and given that, now, I also want to offset the mast – hmmm?

 

I very much like the kit (only in current version) provided upper curved railings. Thought of working with those adding some details and leaving the curved edges to the bulkhead to match the rail – just because I like the curved look. That said - the flat bulkhead is certainly the correct one. McKay’s images also reflect a full flat surface. Also both kits include the railing braces - so could just use those from the old kit and leave the bulkhead flat - as it should probably be. It would certainly be easier, and I could also scratch build a flat bulkhead adding extra details as well. I will include all of the old kit provided solid bronze bits....

 

1.jpeg.56e33ed77cd66c60fecd56bfdf7a5651.jpeg2.jpeg.710a17d8a8a3bcf4303922245e570936.jpeg

 

 

Here are examples of both looks;

 

Stunning work from Y. Shionoya  from a Sergal kit superbly bashed.

 

4.jpg.6909b018171cf6b737eddf030f310c70.jpg

 

from modelships.de --- from the Sergal kit as well

 

5.thumb.jpg.aa0096f2b3d654e781304858fd761da3.jpg

 

And this brilliant scratch built example - bulkhead is beyond perfect - well the entire work!!!

 

6.jpg.858bcef86ff9443fb92d553e203762bc.jpg

 

Thanks for your interest and posts

 

Regards,

 

 

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

It rasises interest and question as to what version was corrct  -  rounded or square  bulwarks  between decks?

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

OC. Have decided to do flat bulkhead - thanks for several - posts regarding this part of the build  :imNotWorthy:  flat was certainly how she was built.

 

FYI's:

 

Trying to absorb( so many) details from the McKay book I found this (images 1 & 2).

 

Seen, of course, before, but thought where could I find miniature Roman numerals that might just work, and add details to this project?

Went to “Google University” (to think that any question this on planet IS answered from a search at Google) and that search brought these up. Could just be perfect – 

So sharing a great -IMO- find other members whom might be interested.

 

Link below images,

 

1.thumb.jpeg.299efc5f39a79cf1ee4196d07f23cdce.jpeg2.thumb.jpeg.7745bd3e5d92856b1da71676746f4759.jpeg3.thumb.jpeg.1b01ec178ccc6f03553e427ff84ed7b4.jpeg4.thumb.jpeg.7f4c2b672c1b758e740b9300cc063f0b.jpeg

 

 

 

 

 

https://www.hfminis.co.uk/shop?product=roman-numerals~hfpkpro05&category=accessories~etched-brass-%28architectural%29

 

As always thank for the "likes" 

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Hi,

Installed both sides of the lower gun deck, as well as adding the dummy carriages. Will get back to adding first plankings, but needed a bit of a change. Worked on how to secure, with an offset, the bowsprit mast. This should work – I hope.

 

1.thumb.jpeg.53154b0fe92cb2578b228e76de232f2d.jpeg2.jpeg.000b7d5b1bcf0c56f9b6298f9374ee06.jpeg3.thumb.jpeg.d8603affd1897465929fbf52751edd63.jpeg4.jpeg.7d9ec5ac5c4043b2cf9c24a28b0992ee.jpeg5.jpeg.9642d3e6e2b670373ede26e9e7f24c7a.jpeg6.jpeg.5fa24e08ad1b1898fa9e8a82f5203749.jpeg7.jpeg.922397544105b9cefe993402ab4900e8.jpeg8.thumb.jpeg.0d68ac89139f2580cfdf48abbbcb5a95.jpeg9.thumb.jpeg.2b8d93d4f694c834c727acbc8058e393.jpeg

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Modifications are looking good. This has been a detail that has always bothered me on previous builds as most 17th century ships had this mast offset yet I don't know of any kits that are designed that way. Modifying for it always became one of those decisions that I chose to forego and always regretted it.

"A Smooth Sea NEVER made a Skilled Sailor"
- John George Hermanson 

-E.J.

 

Current Builds - Royal Louis - Mamoli

                    Royal Caroline - Panart

Completed - Wood - Le Soleil Royal - Sergal - Build Log & Gallery

                                           La Couronne - Corel - Build Log & Gallery

                                           Rattlesnake - Model Shipways, HMS Bounty - Constructo

                           Plastic - USS Constitution - Revel (twice), Cutty Sark.

Unfinished - Plastic - HMS Victory - Heller, Sea Witch.

Member : Nautical Research Guild

 

 

Link to comment
Share on other sites

Frank, E.J.,

 

Thanks for dropping by and your comments.

 

E.J., You are right I don’t know of a single kit that correctly offsets the bowsprit masts for certain ships. I was also not going to offset it either then – wanted to give it a try – let’s see how it works out later. I also need to completely redesign the beakhead – not satisfied with this first effort.

 

Frank; My understanding is that the offset is required because the foremast is so far forward that there would not be enough room and leverage to securely anchor the mast in place into the foremast. Note the images from the Vasa as compared with the Mckay image of the SoS - (foremast placements)

And no the mast needs to re-center for the spritsail yard – or so I understand?

 

PS: Don’t know why some foremasts were placed so far forward. Maybe a much more knowledgeable member could post some thoughts? (balance)?

 

IMG_1910.thumb.jpg.5af59cd332f588f2bdc2691d187a643c.jpgIMG_1908.jpg.ece383d9031e1c4bdfaee1102f04416e.jpg

 

 

 this is a model by H. Culver from the US Navy Museum in Annapolis, Maryland. mast recenters....

 

1025443257_Sovereign24copy.jpg.792415ea617f55f1b50bd68839ae9300.jpg

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Hi Michael, 

I'm excited to follow the offset bowsprit rigging.  Very nice modification.  I always wondered about building this model.  

best

marc

Link to comment
Share on other sites

Marc,

It was something I would have regretted not trying. Already wishing that I had overlaid the gun deck templates with pearwood - so "had to" at least try the offset. Thanks for following along. Welcome aboard.

PS1: not too impressed with kit provided walnut dowels, may glue together 4 oak strips + a bit of filler and make that mast - hmmmm?? sorta how they were done way back when.

PS2: Your Cutty is a beauty, enjoying your work as well !!

 

IMG_3416.jpeg.bd493e255e8133a278a0dd42575faa7b.jpegIMG_3417.jpeg.7b76c16326adffadfa2e31f3c698a2d4.jpeg

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Minor update – did some work for the stern cannon doors.

Needed to be sure that the required openings were not to high up. Looking at an image from old kit helped, along with positioning some decorative bits.

 

1.thumb.jpeg.b27402e2ecdc6321791f6855a88d61f6.jpeg2.jpeg.4ad277dad64a84cb5a95a7ff3ab61642.jpeg

 

Needed to also cut out two spaces because gun door frames and dummy carriages would not fit.

 

3.thumb.jpeg.5695b04fa3eb57d0148f18e41423f0ea.jpeg4.jpeg.1bce14aa8d95c9ad0f17bdc704cca98c.jpeg

 

Added a back filler and painted area black. Carriages will now also fit. Will drill the four gun holes after installation.

 

5.jpeg.6d235ef4da568ec2fed448ecfb40c480.jpeg

 

Put together the gun frame facings. Now set aside – now back to first hull planking.

 

6.jpeg.90b85f23e1146b3382ecdb51573608e9.jpeg7.jpeg.9382596b05070fe11d683b75c40e8b1d.jpeg8.jpeg.290bf70dc95d1f59ca8e343cf540ebe6.jpeg

 

 

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

  • 3 weeks later...

Hi all,

 

Working on the first planking as well as fixing a stern stem post and the keel filler. 

Next, as you all know, will be sanding, sanding, filler and then sanding.

 

Thanks for your visits always much appreciated.

 

1.jpg.a98384e747abb8a709f9a2a890ebaad8.jpg2.jpeg.8877d3c40dcd70bb87185ed7b126f6ee.jpeg3.jpg.6938e9bc7ef0164c91354db6ecada197.jpg4.thumb.jpg.695af98c64a5fa21e9cf7e3300ef248f.jpg5.jpeg.3e7bc2991f54d0a7d8e1bd9523134b8f.jpeg6.thumb.jpeg.e6f1b37cf8078e29050f765145b6ed58.jpeg7.thumb.jpeg.e7fbc4ba452a6c1ec768beebca5f4984.jpeg1269894883_8copy.thumb.jpeg.a6a00660d91503e0d1a976a002f0b8e7.jpeg9.jpeg.fe63024534851b2522055ece6e9de4f7.jpeg10.jpeg.2fc92a7e0f495d36e434b3cf12005a4a.jpeg

 

 

 

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Looking good, the interesting yet scarry stage.

 

OC.

Current builds  


28mm  Battle of Waterloo   attack on La Haye Saint   Diorama.

1/700  HMS Hood   Flyhawk   with  PE, Resin  and Wood Decking.

 

 

 

Completed works.

 

Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic.

HMS Warspite Academy 1/350 plastic kit and wem parts.

HMS Trafalgar Airfix 1/350 submarine  plastic.

Black Pearl  1/72  Revell   with  pirate crew.

Revell  1/48  Mosquito  B IV

Eduard  1/48  Spitfire IX

ICM    1/48   Seafire Mk.III   Special Conversion

1/48  Kinetic  Sea Harrier  FRS1

Link to comment
Share on other sites

Frank, and OC - thanks - yes a "scary stage" needs to be just right - not such a "fun" part of a build (for me in any case) - but just can't mess this up.

 

Here is what I need to do next, before sanding and so on....

 

1301929605_IMG_3567copy.thumb.jpeg.85887c7afff72943d057827ad3f1d83a.jpeg511549551_IMG_3568copy.thumb.jpeg.227b5acc3f913da650dec8ed2b5f006c.jpeg1888024656_IMG_3569copy.jpeg.df0986ff277d70486b52b8960e0fda4c.jpeg

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...