NenadM Posted June 20, 2020 Author Share #4021 Posted June 20, 2020 And finaly ... Maybe, if I find a way to make it more elegant ... Once upon a time ... Maybe usedtosail, Jack12477, mtaylor and 3 others 6 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
mtaylor Posted June 21, 2020 Share #4022 Posted June 21, 2020 What did you use for the hooks, Nenad? You mentioned staples. They look very good. Lovely photography. As for another hobby... don't worry about it. Hobbies sort themselves out. I think I'm down to about 20 at this point. gjdale, Vladimir_Wairoa and popeye the sailor 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
NenadM Posted June 21, 2020 Author Share #4023 Posted June 21, 2020 Attempt No2. A bit more elegant, much stronger. Yesterday I made this from toothpick and 0,3mn wire, today from steel large paper clip and staples. As usual with me, obviously there will be attempt No 3 as final usedtosail, popeye the sailor and mtaylor 3 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted June 24, 2020 Author Share #4024 Posted June 24, 2020 Artempt no 3 (right) More elegant and much better But ... WITH MISTAKE !!!! So, here we go again 😭😭😭 popeye the sailor, mtaylor, Vladimir_Wairoa and 1 other 4 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted June 26, 2020 Author Share #4025 Posted June 26, 2020 Atttempt No 4. and that is final solution. I just can't do it better. (for now 😁). Top and the bottom are soldered, another little beadt are glued with CA. Acryl paint will harden all structure. All made from brass wire 1mm and 0,3mm. popeye the sailor, Vladimir_Wairoa, mtaylor and 5 others 8 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted June 28, 2020 Share #4026 Posted June 28, 2020 On 6/26/2020 at 8:06 PM, NenadM said: Atttempt No 4. and that is final solution. I just can't do it better. (for now 😁). Top and the bottom are soldered, another little beadt are glued with CA. Acryl paint will harden all structure. All made from brass wire 1mm and 0,3mm. impressive with arrow Nenad in such small scale. your focus on tiny details is wow. Vlad mtaylor, popeye the sailor, Jack12477 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
NenadM Posted June 30, 2020 Author Share #4027 Posted June 30, 2020 On 6/28/2020 at 4:35 PM, Vladimir_Wairoa said: impressive with arrow Nenad in such small scale. your focus on tiny details is wow. Vlad Thank you, Vlad. As I said somewhere in this, I think, the slowest build on MSW log, couple of years ago, I made terrible mistakes with lines of main deck, so, I decided to overdetail Her Majesty, to try to "pull up" whole thing. That approach lead me to this ... ant work ... (which is, really - nothing, comparing what, for instance, MSW member Igor Sky do!!!!) However, it is fun to test your own limits, and to learn. Thank you for watching and following popeye the sailor, mtaylor and ScottRC 3 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted June 30, 2020 Share #4028 Posted June 30, 2020 50 minutes ago, NenadM said: Thank you, Vlad. As I said somewhere in this, I think, the slowest build on MSW log, couple of years ago, I made terrible mistakes with lines of main deck, so, I decided to overdetail Her Majesty, to try to "pull up" whole thing. That approach lead me to this ... ant work ... (which is, really - nothing, comparing what, for instance, MSW member Igor Sky do!!!!) However, it is fun to test your own limits, and to learn. Thank you for watching and following Your ant work is beautiful and interesting in many ways thanks for sharing it. i did make crucial miatakes on my path and i am not shy to admit it. why should i be? i dont like taking this hobby as some kind of competition in the moment i do passion and fun dies for me. im happy i can elarn from skilled ones but i think boat of everyone is just bwutiful in its own artisticalyl and technically way because everyone is different. fair wind to our cape horners Vlad mtaylor, usedtosail, popeye the sailor and 1 other 4 Quote Link to comment Share on other sites More sharing options...
NenadM Posted July 1, 2020 Author Share #4029 Posted July 1, 2020 Devil is not sleeping ... or just retrograde Mercury ( who believe in Zodiac ... I do not ... until now ... still do not ... but ... ) Flood in the kitchen with 150 liters of water on the wooden floor ... a real party ... so Her Majesty is gonna rest a while until I finish this show and repair all damage See you soon, folks popeye the sailor 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
mtaylor Posted July 2, 2020 Share #4030 Posted July 2, 2020 That is not a post to like, my friend. I hope there's not too much damage. popeye the sailor, Vladimir_Wairoa and cog 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
cog Posted July 2, 2020 Share #4031 Posted July 2, 2020 Sorry to hear about the misfortune, Nenad. Hope the damage is limited, and easily repaired. popeye the sailor and mtaylor 2 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
keelhauled Posted July 13, 2020 Share #4032 Posted July 13, 2020 Sorry to hear about the water!! Very nice work on the ship!! I'm always inspired seeing your creativity! best wishes marc popeye the sailor, Vladimir_Wairoa and mtaylor 3 Quote Currently building the Cutty Sark http://modelshipworld.com/index.php?/topic/1000-cutty-sark-by-keelhauled-mantua-kit-bashed-first-wooden-ship-build/ Link to comment Share on other sites More sharing options...
NenadM Posted February 18, 2021 Author Share #4033 Posted February 18, 2021 Hello to all Just to say Hi, and to declare that I am still live and here. We were all without Covid for now. After flood, things go out of control. All of works lasted about two months, and finished with 3 loong weeks in September, litterary laying whole day with terrible back pain, and next 3 months with medium pains ... there are some things ( moving cabinets and furniture alone by myself) that I still can do (in my 62 years), but I COULD NOT do that any more ... learned on really harder way ... So, any work except light office work was unpossible for me to do, considering home works. Even vacum cleaning returned me to bed. Last two months it seems that I am 90% recovered, so I hope to continue with yards and masts. And with vacum cleaning In mean time, Hot-head passed his very last bachelor exame on Architecture Faculty, and there is only bachelor thesis to do, AND THIS IS THE END OF HIS STUDY !!!! Be well and safe, my friends! popeye the sailor 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
gjdale Posted February 18, 2021 Share #4034 Posted February 18, 2021 (edited) Sorry to hear of your back pain issues Nenad, but glad to see you back posting again. Hope your health continues to improve. Edited February 18, 2021 by gjdale mtaylor, popeye the sailor and NenadM 3 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
mtaylor Posted February 18, 2021 Share #4035 Posted February 18, 2021 Good to see you again, Nenad. And good that the back pain is easing along with news of Hot-Head. Stay safe and I hope the Covid stays away. popeye the sailor, Vladimir_Wairoa and NenadM 3 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Kevin Posted February 18, 2021 Share #4036 Posted February 18, 2021 nice to hear from you again, NenadM, Vladimir_Wairoa, popeye the sailor and 1 other 4 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 HMHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
NenadM Posted February 23, 2021 Author Share #4037 Posted February 23, 2021 And ... bowsprit is here popeye the sailor, Vladimir_Wairoa, GrandpaPhil and 4 others 7 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted April 17, 2021 Author Share #4038 Posted April 17, 2021 Masts - moving forward popeye the sailor, GrandpaPhil, baskerbosse and 1 other 4 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted April 19, 2021 Author Share #4039 Posted April 19, 2021 Lower main mast. Mistake 1/100 mm 😁 I can live with that popeye the sailor, mtaylor, ScottRC and 2 others 5 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted April 20, 2021 Author Share #4040 Posted April 20, 2021 And lower fore mast base is done baskerbosse, mtaylor, popeye the sailor and 2 others 5 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Bruma Posted April 20, 2021 Share #4041 Posted April 20, 2021 Good to see you back on your model! Keep going! popeye the sailor, mtaylor and NenadM 3 Quote Current build: Cutty Sark - Revell - 1:96: https://modelshipworld.com/topic/25323-cutty-sark-by-bruma-revell-196/ Link to comment Share on other sites More sharing options...
NenadM Posted April 20, 2021 Author Share #4042 Posted April 20, 2021 3 minutes ago, Bruma said: Good to see you back on your model! Keep going! Than you, and wellcome to my journey. Day is short for my chatacter (monkey see monkey do) and for my 100 hobbies, office work, home work garden work and social life. I hope I'll have time to move forward faster. But, there are always chalenges arround, such a this song I deadly want to know to play and sing mtaylor, popeye the sailor and keelhauled 3 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted April 21, 2021 Author Share #4043 Posted April 21, 2021 Shipyard or walking today? Walking with Rhea on Belgrade Lake And sunset was ... golden! Photos are takwn by cell phone Jack12477, Keith Black, keelhauled and 2 others 5 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
mtaylor Posted April 22, 2021 Share #4044 Posted April 22, 2021 Good choice, Nenad. Days like that seem to be rare but worth the effort go out and enjoy them. popeye the sailor 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
NenadM Posted April 24, 2021 Author Share #4045 Posted April 24, 2021 On 4/23/2021 at 12:31 AM, mtaylor said: Good choice, Nenad. Days like that seem to be rare but worth the effort go out and enjoy them. Hi dear friend, you are right, as usual popeye the sailor 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted April 24, 2021 Author Share #4046 Posted April 24, 2021 Finaly, one day worm enough to do some bussiness out of flat. Until lunch, I was doing homeworks (londery, cleaning, cooking, grooming Rhea etc etc) and some yard-works (cuttung pampas and another grass, taking out flower pots from rooms to terace etc etc), with plan to go with her to a loong walk over Belgrade Sea But, fortunately or not, as a consequence of issolation during my Covid sheet, I was so tired, that I quit from that idea pretty easy. Take a little nap, a nd a long rest with some ness coffee, and decided to finish neccessary paper works to go forward with my model. So, daily plans were converted toward Her Majesty`s needs, and after three hours of "playing" with Adobe Illustrator CS6, working plans with shape and right dimensions for all three masts and all nine parts of them are finished. And I can say, we are on a god path to upper works above deck keelhauled, mtaylor, popeye the sailor and 1 other 4 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted April 28, 2021 Author Share #4047 Posted April 28, 2021 And the third - done! As usual, with some bussines trip ... and awarded photo in one FB photo group made on trip Jack12477, keelhauled, popeye the sailor and 1 other 4 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
NenadM Posted April 29, 2021 Author Share #4048 Posted April 29, 2021 Just to mention ... since I don't have a lathe, I get the conical shape of the mast by improvisation - I put a measured piece of wooden stick in the jaw of the drill, and then at low speed, using knives and sandpaper, imitating the lathe, and peel the wood to the required dimensions. Accurate diameter measurement to 1/10 mm at every step is implied. Ah, that smell of sawdust and wood dust ... Idea is to finish in wood all nine parts of masts, and after that to "dress" them with all miniature parts, and to paint them all in same way. popeye the sailor, mtaylor and keelhauled 2 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
mtaylor Posted April 29, 2021 Share #4049 Posted April 29, 2021 You have a good plan, Nenad. I'm looking forward to more updates on this beauty. NenadM 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
NenadM Posted May 6, 2021 Author Share #4050 Posted May 6, 2021 I couldn't stand it ... always around Easter, fake wooden eggs appear, just born for playing with engraving ... And so ... instead of continuing with the masts, Nenad played and engraved his own fingers, and one of this little eggs. All in all, useful as a one of lessons toward serious engraving exercise, that awaits me when the figure-head comes to line GrandpaPhil, keelhauled, Jack12477 and 2 others 4 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.