Jump to content

Muirneag 1903 by Blue Ensign – FINISHED - 1:64 scale - A Scottish Zulu Fishing Boat Based on the Vanguard Models Zulu Kit


Recommended Posts

Amongst the many interesting aspects of this vessel, I wonder about the mundane fact of how many fishermen fell overboard in rough seas with so little to keep them from doing so.🥶

Regards,

Glenn

 

Current Build: HMS Winchelsea
Completed Builds: HM Flirt (paused) HM Cutter CheerfulLady NelsonAmati HMS Vanguard,  
HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose

Link to comment
Share on other sites

Beautiful, BE!  For what it's worth, I like the look of the stem plate unpainted.  It gives a crisp and detailed look to the stem profile.  I'd leave it as is.

-E

Erik K. Evens

Architect and sailor

Evens Architects

 

Currently building:  Brig Sloop HMS Flirt - Vanguard Models

Completed"Lady Isabella" Scottish Fishing Zulu - Vanguard Models

Link to comment
Share on other sites

Thank you Glenn, Erik, and John.

@ Glenn - The losses suffered by those small fishing communities make for sobering reading.

In one notable storm in October 1881 189 men were lost, 129 from one community leaving 263 children fatherless. No social security in those days.

The possibility is real that many of the boats lost were rendered unmanageable owing to crews being weakened  through  men washed overboard.  Losses overboard were an ever present danger.

 

@ Erik - I think I'll leave the stem plate unpainted, I do like the look of blackened metal.

 

@ John -  Coming from an old salt like you, that's good to know. 😀

 

Post 32

Bobstay sheave

 

Situated on the starboard side of the stem is a sheave to carry the Bobstay.

 The kit provides a simplified etched piece (PE11) referred to as a stem cleat.

 I replaced it with a scratched version based on the Underhill drawings.

611975162_DSC08487(2).thumb.JPG.182764207b4085c2efabf624f6b5f11b.JPG

8487(2)

41793879_DSC08493(2).thumb.JPG.4ead96ba36791fdf7240760214598698.JPG

8493(2)

 Silver soldered together from thin brass strip and micro tubing.

 

DSC08504.thumb.JPG.95a7e71471c5341342a3c1c1b1706b7b.JPG

8504

DSC08501.thumb.JPG.e854e6b57b869562bd3cf1119068e6d8.JPG

8501

DSC08507.thumb.JPG.bdb06f56a8aa1b2b0d319e53069173d3.JPG

8507

Competed and chemically blackened.

 

43383581_DSC08512(2).thumb.JPG.90df183478357a3073a54d7fceee84ae.JPG

8512(2)

In checking over the inboard fittings I realised I had forgotten to make the Mizen halyard sheaves so two of these were made in the same fashion as the Bobstay sheave.

Rope stopper

 

The Underhill plan shows these lines spliced around the stringers both port & starboard ahead of the Fore and Mizen halyard sheaves.

 

DSC08532.thumb.JPG.48dc9a283a810abbfcbd836d92363506.JPG

8532

In use they are bent to the falls of purchase with a rolling or stopper hitch and take the strain while the running end of the fall is taken off the capstan and belayed to the cleat.

DSC08515.thumb.JPG.03bb9812ecb0cfd8face048b8791af44.JPG

8515

In the absence of any other information I have used Syren 0.63mm ø line. which looked about right to my eye.

 

DSC08529.thumb.JPG.ffceb620851220d876970b55ff371fae.JPG

8529

Not an anchor chain but the Bowsprit necklace chain that will be trimmed to length once the Bowsprit is fitted.

 

DSC08535.thumb.JPG.b87b8841eef0025e76a6b139c685bb76.JPG

8535

All the Foredeck fittings are now in place.

 

B.E.

04/11/20

Edited by Blue Ensign
Link to comment
Share on other sites

B.E,

 

Wonderful details.

 

And I do agree that the stem plate  looks much better unpainted...I think it's how the practically minded builders/fishermen would have installed it and maintained it.

 

Yes, fishermen (and their families) worldwide can have a very hard life. I guess it was not easy to find other, safer employment ouside the areas they lived in. The same would apply to miners.

 

Regards,

 

Richard

Edited by Rik Thistle
Link to comment
Share on other sites

Wow, I knew it was a hard life, but that’s devastating.

 

I’m always amazed at your metalwork. I’ve never done any of that, but am going to have to try doing something.  Your deck details are impressive. So much into one small (relative to our usual fare) craft.

Regards,

Glenn

 

Current Build: HMS Winchelsea
Completed Builds: HM Flirt (paused) HM Cutter CheerfulLady NelsonAmati HMS Vanguard,  
HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose

Link to comment
Share on other sites

Thank you Thomas, here's a few more. 😉

 

Post 33

I can’t quite decide what to do next on the build so I decided to play around with some optional fittings, namely the riding lights.

I suspect that these lights were only used during fishing when the boat was drifting, mast and sails lowered.

DSC08549.thumb.JPG.229a1d8ce23ae20f575be195d4e212f3.JPG

8549

The aft riding light slots into brackets on the aft side of the mast crutch.

900814321_DSC08538(2).thumb.JPG.e3ccd70a30fd68e71e89f7dae9d2975c.JPG

8538(2)

827499413_DSC08542(2).thumb.JPG.c371426816a25b640850125ba9c87656.JPG

8542

Not too difficult to construct with brass tubing, wire, and a spot of silver soldering.

 

DSC08562.thumb.JPG.fad15c06ae8e4e898ee670fc5e033ab1.JPG

8562

Will be trimmed to size once I have sorted out the lamp.

 

The forward light sits in a similar forked stanchion that fits in a socket set against the forward coaming of the fish hatch.

DSC08550.thumb.JPG.5da0ce984a6fe129c8cb3e8a2df73483.JPG

8550

DSC08559.thumb.JPG.c30d5070154a926d634fceb20d994447.JPG

8559

1161313173_DSC08558(2).thumb.JPG.cd2026c1886a0239d354d12d006dc244.JPG

8558(2)

That is the easy bit, what to do about the lamps is the tricky part.

At scale these hurricane style lamps are a mere 6mm high x 3.5mm wide. 🤔

 

B.E.

06/11/20

 

Link to comment
Share on other sites

Post 34

Riding lamp

 

Having made the Riding light stanchions I was committed to at least having a go at the lamp.

 The basis of the lamp is small brass Billing Boats masthead lamp bought from CMB. At (6x4mm) it was the smallest I could find and is a good fit for scale.

 

DSC08565.thumb.JPG.de53b8811cc2367e02673ada7e132898.JPG

8565

To convert it to the riding light I first had to mill thro’ the back of the part to give a 360 degree light.

The strap and top handle were then added using brass strip silver soldered to the sides. I use a high melt point (690 degrees) paste to allow for adding further items.

 

1987700107_DSC08580(2).thumb.JPG.6acfbe81036279413d0f2b86d34df5f2.JPG

8580(2)

DSC08586.thumb.JPG.6296a388106b05184b7f9a3beae8a472.JPG

8586

Holes are drilled in the straps to take the retaining eyebolts.

 

1026887655_DSC08596(2).thumb.JPG.b35834059d3437bbee8497aa2956dce4.JPG

8596(2)

The eyebolts of necessity are very fine. I used Caldercraft etched versions of 0.25mm thickness with a 0.7mm ø hole.

The danger in soldering these in place is that the flame may melt the eyebolt before the solder flash. A test piece was made before committing to the lamp.

A lower temperature paste of 671 degrees was used for the eyebolts.

 

 

I scratched my head for a while as to how to produce the shaped oil container at the base of the lamp.

DSC08575.thumb.JPG.20794b3cfb1cb9754a21f18c68d7a3ab.JPG

8575

The answer came in the form of a small brass countersunk screw head.

 

2014399490_DSC08607(2).thumb.JPG.60ec362afab2284549338e9c4bc4014a.JPG

8607(2)

The completed lamp in its unfettled state fitted into its bracket.

 

DSC08612.thumb.JPG.1389a520c25c46fbe4a9ae5836bf7264.JPG

8612

… and as would be used onboard, final height yet to be determined.

 

101853945_DSC08610(2).thumb.JPG.156f5d6a51a1917e04d5040e05473885.JPG

8610(2)

The final hurdle is how to represent the clear glass cover of the lamp.

My first thought was a section of one of those clear plastic covers that protect fine paintbrushes.

Ideally a clear cover would be inserted thro’ the hole in the bottom of the casing, but when it came to soldering the base on, the obvious would occur.

I have one or two ideas about creating the ‘glass’, but the subject bears more thinking about before I commit.

 

 

It has been interesting making this little ‘extra’ if only as an exercise in silver soldering tiny parts.

Still the finishing to do but I’ve rather enjoyed the process thus far.

 

 

B.E.

09/11/20

 

 

Edited by Blue Ensign
Link to comment
Share on other sites

Fantastic lamp! Love your work B.E.

Rusty

"So Long For Now" B) 

 

Current Builds: HMS Winchelsea 1/48  Duchess of Kingston

 

Completed Build Logs: USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross SectionCutter CheerfulQueen Anne Barge, Medway Longboat

 

Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout

 

Link to comment
Share on other sites

Superb work. What details and what precision !

Jean-Paul

 

'You are not carving a bear with a chain saw here folks',

Chuck Passaro, ´Queen Anne Style Barge´ manual of instructions

 

Current builds :

 

Finished build :

 

Next on list :

  • Santa Maria boat - Korabel (Ukraine) - 1:24
Link to comment
Share on other sites

Cheers Guy's  glad you like it.

Post 35

Riding lamp completion

 

Before I cleaned up and blackened the lamp I wanted to make sure I could fit the lamp glass.

I did eventually settle on using a fine paintbrush cover, slightly opaque and of 3.5mm ø.

Several attempts later I managed to get a 1.5mm slice of the tube that fitted snugly in the lamp.

 

1106105620_DSC08615(2).thumb.JPG.d5c3e7432eb31eaa2eeca9c7177ca830.JPG

8615(2)

1011429243_DSC08620(2).thumb.JPG.733cdf15cdb5fe5b060fb2453b61c978.JPG

8620(2)

With the lamp ‘glass’ looking ok I could move onto the blackening.

 

1438385495_DSC08627(2).thumb.JPG.e07c8c630c8f426b5cb3e13de74e5ebf.JPG

8627(2)

The glass was removed, and the body cleaned using micro files, fine wire wool, and acid, before immersing in the blackening fluid.

 

73355246_DSC08640(2).thumb.JPG.51cf4d25959bcde8fa8a7ea98ca7eb62.JPG

8640(2)

Came out a lot better than I had dared hope, given the small size and delicate handling required during cleaning.

943227201_DSC08637(3).thumb.JPG.77caaa9a93eef02aeca47f418433ff43.JPG

8637(3)

1631242487_DSC08634(2).thumb.JPG.81e9b072aa200483a5817a9b3b34b3d1.JPG

8634(2)

 

DSC08635 (2).JPG

 

Time to get back to the main event.

 

 

B.E.

09/11/20

Edited by Blue Ensign
Link to comment
Share on other sites

 Beautiful ****!!! ...Moab

Completed Builds:

Virginia Armed Sloop...Model Shipways

Ranger...Corel

Louise Steam Launch...Constructo

Hansa Kogge...Dusek

Yankee Hero...BlueJacket

Spray...BlueJacket

26’ Long Boat...Model Shipways

Under Construction:

Emma C. Berry...Model Shipways

 

Link to comment
Share on other sites

That must have been fun! Just what modelling is all about.

 

Tony

Link to comment
Share on other sites

One of the most delightful and entertaining aspects of following your logs, BE, is your unmatched talent in finding uses for those little pieces of detritus that litter builders' lives and workbenches.  My word, a screw head!  That's just as good as the bristle from William's brush. 

 

Wonderful.

 

Martin

Current Build:  HMS FLY 1776

 

Previous Builds:  Rattlesnake 1781

                        Prince de Neufchatel

Link to comment
Share on other sites

Thanks for your supportive comments Guys, much appreciated.

Your right Tony, trying to produce something to add to a kit is one of the pleasures for me, and the more you do it the more adventurous you get. Having an appreciation of the ‘art of the possible’ is a valuable asset in ship modelling.

@ Martin – they say that necessity is the mother of invention, and I’m sure I’m not alone in our model making fraternity in looking at everyday items and thinking hmmn 🤔 that may prove useful at some point. 😀

The only issue is remembering what it was or where I put it. 🙄

 

 

Post 36

Mizen boom fitting

 

This involves positioning the Boom saddle and boom chocks to support the after-sail boom.

 In the kit instructions these are referred to as the boom support and boom bracket.

 

I remade these items to better reflect the Muirneag fittings.

 

A chain necklace secures the inboard end and an iron strap in the manner of a cap square at the outboard end.

 

In considering the position of these supports the Mizen boom needs to be test fitted as it passes very close to the horizontal ships wheel.

 

Fixing these parts proved quite tricky not least due to the stern overhang making supporting the hull difficult in this area with the rudder in place.

 

Pressure is required to form and fix the strap over the stern boom saddle but putting any pressure on that area of the deck causes the hull to shift.

 

584558935_DSC08666(2).thumb.JPG.a17b625a82a5b441b2e5be7c517a1d1d.JPG

8666(2)

I got around the problem by securing the horizontal bar of the keel clamp in the jaws of the vice which prevented any downward movement.

 

The kit dimensions for the boom are spot on compared to the Underhill plans, 4mm dowel is used tapering to 3mm at the outboard end.

 

329568067_DSC08669(2).thumb.JPG.f161a8b388b73d086b46c0ea27c4b973.JPG

8669(2)

Forming the ‘iron’ strap.

 

DSC08688.thumb.JPG.57a674bad0b058809d85612ff02c4fb1.JPG

8688

Blackened and fitted.

The retaining pin for the strap can be seen on the outboard side.

 

If you think the wheel looks a little weather beaten, the finish has been battered because I decided to solder the stem to the underside of the wheel.

I had originally ca’d the wheel to the stem but it stubbornly refused to sit firmly no doubt because of the tiny area to take the glue.

 

1227137583_DSC08679(2).thumb.JPG.8e0f4e534632134bc5fb584c93e46e71.JPG

8679(2)

1480903973_DSC08676(2).thumb.JPG.bb1c5f82e6e422cb32b568f744a482dc.JPG

8676(2)

The chain necklace can be seen at the inboard end.

As with the Bowsprit a shoulder was cut in inboard end of the boom to rest against the face of the chock.

 

337486929_DSC08674(2).thumb.JPG.e183d6ab08f0ad52093af8367ae887e2.JPG

8674(2)

339829050_DSC08689(2).thumb.JPG.274b7f1a8ccfc5132330c7018d83d426.JPG

8689(2)

 

Onwards…

 

 

B.E.

11/11/20

Edited by Blue Ensign
Link to comment
Share on other sites

Post 37

Side light boards

Navigation lights were introduced during the 19thc initially for steam powered vessels but later extended to sail.

I can’t find any contemporary photos of Zulus at sea with navigation boards in place, perhaps they were unshipped when underway in daylight; the nature of the fishing business was that herring were fished at night with the return to port in the morning.

Still they are a valid addition to the model and present another interesting little modelling exercise.

I scaled down from the Underhill drawings to produce a mock-up made from thin card.

1227643363_DSC08709(2).thumb.JPG.a6e5723136291da3328b272ac122c5f8.JPG

8709(2)

Once I was happy with the proportions, I made the items out of 0.6mm x 6mm Boxwood.

1842606327_DSC08712(2).thumb.JPG.9dfa8a0112cd39dc34362a8469f92d78.JPG

8712(2)

The dimensions are 18mm long, 4mm high (reducing to 3.5mm) and 4mm wide (reducing to 3mm)

777837901_DSC08704(2).thumb.JPG.a7d8d68dda5a247c9372d66b2248cb9a.JPG

8704(2)

The board is supported on stanchions 14mm apart slotted into sockets I had previously fixed to the aft side of the stringers.

For ease of construction the stanchion and support frame are made in two parts. Uprights using 0.9mm ø brass tubing fit thro’ the sockets into the deck.

DSC08702.thumb.JPG.47719295ac68fdb7b2a740c9df3c1ca6.JPG

8702

The board support arms (0.6mm ø brass wire) slot into eyebolts on the aft side of the board and are angled to throw the board parallel to the centre line.

The arms slot into the upright tubing.

796319154_DSC08727(2).thumb.JPG.045643bd7f3ef86535874968c6bf5c51.JPG

8727(2)

848066793_DSC08735(2).thumb.JPG.bec71a96948c6c3be69f54f432f2e9c6.JPG

8735(2)

867748882_DSC08732(2).thumb.JPG.05d33eb451a208a452ec75db11c9b414.JPG

8732(2)

I need to sort out the lights but I think I have now added all the inboard fittings indicated on the Underhill plans.

There is a decision to be made about bilge keels before I move onto mast making.

 

B.E.

14/11/20

 

Link to comment
Share on other sites

The level of research and detail is impressive. 

Regards,

Glenn

 

Current Build: HMS Winchelsea
Completed Builds: HM Flirt (paused) HM Cutter CheerfulLady NelsonAmati HMS Vanguard,  
HMS Pegasus, Fair American, HM Granado, HM Pickle, AVS, Pride of Baltimore, Bluenose

Link to comment
Share on other sites

The level of research and detail is impressive. 

 

It certainly is. And very enjoyable to read and watch the progess plus the little diversions that invariably turn in to something special.

 

I kinda hopes BE never finishes his journey with Muirneag 🙂

 

Richard

 

 

 

 

Edited by Rik Thistle
Link to comment
Share on other sites

Cheers Glenn, Richard, and John.

@ Richard – I’ve a way to go yet, but I would hope to finish it by the end of the year – I’ve other boxes of delight below my bench awaiting attention. 🙂

@ John - Interesting snippet there John I wasn't aware of that. I see what you mean from this photo taken at Charlestown back in September.

DSC_4664.thumb.JPG.933d33191d880b1ba5869352dc425811.JPG

There is definitely a blueish/green hue to the glass; whether I can replicate that at 1:64 scale is a different matter. 🤔

Regards,

 

B.E.

Link to comment
Share on other sites

Post 38

Bilge keel

 

To add or not to add, that is the question.

 

The Underhill plan doesn’t show them but both the George MacLeod model in the NMM, and the Gordon Williams model show this fitting.

 

There is also a photo of the Zulu Mary Jeanie 1898 in dry dock which also clearly has them.

The version on both the George MacLeod and Gordon Williams models looks like a flat board rather than a keel piece.

IMG_3488ab.jpg.82b45d89bd4dbd3540da2243295734d1.jpg

3488ab Gordon Williams model.

 

 My understanding is bilge keels were more of a shallow triangular profile pointing downwards and outwards below the round of the hull.

 

Purely on the off chance and with little expectation that the telephone number was still extant I called Gordon Williams who lives in Monmouth and whose splendid model of Muirneag resides in the museum in Stornoway.

To my surprise he responded and I had very interesting conversation about his model and his inclusion of Bilge keels, which were absent from the Underhill plans.

 

Gordon had personally examined the NMM model which informed his own build and he had taken the inclusion and style from the model in the NMM. This had been built in 1955 by George MacLeod who had taken the measurements directly from the vessel before it was broken up in 1947 and formed the basis of the Underhill plans.

 

Amongst other things, I did confirm the pronunciation of the name MuirneagMoornach which he had got directly from those who know whilst visiting Stornoway.

 

At least I now know how to say my models’ name.

 

1666167586_IMG_3587research.thumb.jpg.078738647ebb65aa0a330179f147d818.jpg

3587 The Zulu Research (originally Heather Bell) under restoration at the Fisheries Museum, Anstruther.

 

The aft end of a bilge keel can be seen that looks different to the form on the two models.

Research is the last surviving large Zulu. A boat of 80’ she was built in 1903 so is a contemporary of Muirneag, and she had a long career, fishing until 1968.

 

With such a long active service with many modifications over the years I don’t know if the bilge keel is original or a later addition.

 

1522283452_DSC08753(2).thumb.JPG.5f6b4ed944cf3fa41281f9e3a3a3cb34.JPG

8753(2)

Not having any direct plan to work from I estimated the position and length from a combination of photos and models, and I drew an approximation on the kit plan.

1256558916_DSC08752(2).thumb.JPG.4cf50a3623bff9dc9063070e356a15eb.JPG

8752(2)

A 1mm thick Pearwood strip was fined down to dimensions that looked right to my eye; 140mm in length with a centre width of 2.5mm tapering to 1.75mm at the ends. A degree of lateral bend was imparted, and the outer edge was thinned to 0.75mm.

That is the easy bit, retro fitting the keels less so, and the more I looked at it the less I fancied it.

It will involve messing up the already painted hull, positioning is everything, and ca would have to be used to get a rapid grab.

However, having satisfied myself that Bilge keels were appropriate, there was no putting the Genie back in the bottle.

1693599037_DSC08792(2).thumb.JPG.ee83069446413055006793446bf324dc.JPG

8792(2)

The first job is to mark the position of the keels; for this I used a strip of lining tape.

717085301_DSC08800(2).thumb.JPG.8dcffcf681d90daa662b6ab26010716a.JPG

8800(2)

To aid positioning and final gluing fine pins were inserted through the keels into corresponding holes in the hull.

775570963_DSC08806(2).thumb.JPG.2726df6db87c7f296d6c8d6624c10605.JPG

8806(2)

Went somewhat better than I feared it would

DSC08758.JPG

8758

I took the opportunity with the hull needing attention to add the keel straps at the bow and stern. These are reinforcing straps where the stem and stern posts meet the keel.

DSC08766.JPG

8766

I used Syren card gudgeon straps at the stern and soft pewter strip at the bow which took a better curve.

 

Hopefully, this concludes the messing about with the hull stage.

 

B.E.

17/11/20

 

 

 

 

Edited by Blue Ensign
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...