Jump to content

WASA 1628 by Cpt_Haddock - Billing Boats BB490 – 1:75


Recommended Posts

20 minutes ago, clearway said:

looking good (as an aside i am from the town that built the sailing ship dunboyne, now a museum ship called the auf chapman in stockholm). Showing Cumbrias norse roots we still say "as fra Whitehaven"😉

 

Keith

Thanks, interesting, I have seen that ship in Stockholm. I think they use it at hostel nowadays. Haven been on board though.

_ Cumbria seem a nice place to live

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

1 hour ago, Cpt_Haddock said:

Thanks md, I have also the Sergal Sovereign as my next-next project.

Do you know why there seem to be different stern versions for the Sovereign? I have seen at least three different.  Sergal has two animals around a weapon shield, then there is one with a woman between two riders and also one with an angel between riders.

My understanding is that it has to do with each refurbishment throughout its active life. At one point she was burned to the waterline and again refurbished.  Other much more knowledgeable members may have more detailed information.

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Bow paintings and gold:

image.png.ccbdece1c4098632cdb111e031331376.png

It is supposed to be a Polish man (when I was in Poland a few years back - they told me a history of some country men foolish the Swedish army in the forests back in the days) on his knees i the blue area. I simplified that part.

Instead added a sword to the upper figure and put some left-over parts in the are (in red).

image.png.f08b87cd56ae8e27716c38b7d04ed707.png

 

One side of the boat finished with wax mixture.

image.png.e1c86ea7bb782f4da00896373726ce60.png

 

Mounting the rudder and stern.

 

I used plastic spares (brown) as rivets melted in each end using a soldering iron for the mountings of the rudder.

image.png.3084d789298a1181f574b96a96f6ac64.png

 

I had at this point in the build spend a little more than half of the total building time (calendar time). Starting in Mars 2015 and at this state of the build in February of 2018.

 

image.png.49f53194a19b7a5a111cefc40a985429.png

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

Closeup on the nails and wooden plugs, some nails came without the head - so I used them for the joints:

image.png.7de9dd13b33ec372e8126b8d3b0df1ed.png

 

image.png.dc9f12e71fe834d760f2af160f782535.png

 

The work on the hull done. Time to move on to work on the cannons.

image.png.4278e665670fb5f83aec5947b01a806d.png

 

This is how the cannon barrels looks like after oxidation.

image.png.24ddf1950dfa893dec29b8aa32605990.png

image.png.edc820e649ebbb6b8273e8f8187de721.png

 

All These also have to be darker to match the hull.

image.png.e00836ccdec1903a8000924e3e12e7e6.png

 

image.png.1a0623d77c99411ab1b3124be8f7c63a.png

 

image.png.ce5ca1c5e013bc3aa35cccbd119f919c.png

 

Quite monotonous work building all these cannons.

image.png.ace5fd64e13cf07071d4876aabc68b9a.png

 

These museum cannons have wooden wheels though:

image.png.bdfac8a7b52be41f0a59dee17fd9e922.png

 

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

Did look forward to start with the rigging but at the same time not. It turned out to be more tricky than expected. I though more and more about people building those small ships in bottles.

 

I started with the masts and the capstan. I also fixed the cannons.

 

image.png.42cecc6cabc2e964247351c697223921.png

 

image.png.f5241c8a7a89716bc6da9e800d264df4.png

 

image.png.2e644fa8a72e828c268f7895e01407aa.png

 

image.png.a4850d19e83f3c9d7bc94edd4f78cfb3.png

 

image.png.07d99f4012e065d382621c27a6bbcc17.png

 

image.png.abbd67ac363e96419214663a33cf86a3.png

 

I prepared all the mast and boom parts and decided to start the rigging from the front of the ship.

 

image.png.41e473dc9f76d19a9eb9179abb95a2a3.png

I wanted to rig with sails but "folded". I used wallpaper glue for fixing the fabric so to simulate gravity. I also used wallpaper glue on the wires for gravity-effect. First I used glue then sugar/water but that did not work.

 

image.png.73f31d680638dfefbdeb08d44a206e9c.png

 

At the start I used the wiring from the Billing boat kit but soon bought some better wires that didn't  "fuzz" that much.

 

image.png.42e8274f55b40c456e23a324fff23dc9.png

 

I had three major issues with the bow:

 

1) the rope connecting the lower blocks - to the other side without a joint - I made a joint at the underside of the bowsprit:

image.png.9fbb200644a6579012126ca878410fad.png

 

2) The next problem was that the whole mast at the bow bent backwards when attaching all the wires to the front mast. I remade the whole bowsprit due to this later.

image.png.28c51c93e4e4e1171e78d444b8fade9d.png

 

3) Finally I did not want to drill in the mast (afraid it would brake) but fixed the bow yard using two wires "on the outside" one on each side -

image.png.e6c5c6e9cb244f0562e8faeecc5fd862.png

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

The fixation of the front mast shrouds:

image.png.e34339017f7d0b22ef196d09f9adcb05.png

image.png.b65c7819ba60c78ba5587143b7a17a59.png

 

image.png.a51305517b5a57a16ce4cb48964bcebf.png

 

And placing the sail from the top and downwards.

image.png.158f5bc9c5979b5b9e40a2ca558dab84.png

 

image.png.19969c30e8b9894a33aea5d305ebf58e.png

 

Here is fabric drained in wallpaper glue:

 

image.png.2caddf315e0304ad26b4c1c68d5f994f.png

 

image.png.73ced40840d10d5aa26746a107b7064d.png

 

image.png.843d7e7fd9929106b6e3d790e976a010.png

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

I missed working with wood, I noticed that the age (poor vision on close objects) was getting more and more annoying when working with the rig.

image.png.66e7150d94e16df78ddb7a461c12ea61.png

 

image.png.018aa0c4f32cd749c3d978a3c2474ee0.png

 

I added some barrels and boxes for the deck.

image.png.723f8dfd10d0161f25c8dc56706d1bac.png

 

Used metal wire between the blocks instead of wire on the main mast.

 

P1260205.JPG.3a5d28d7e77927ea710b71813d8d87c4.JPG

 

image.png.4196133adac8ee889c4ce7b478c47132.png

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

Link to comment
Share on other sites

I made some mini-blocks that was not included in the kit:

 

image.png.7824b51545075fe9706a30c0acbc0ab1.png

 

It was tricky to get tension on all wires even using a template and lots of wall paper glue:

 

image.png.3987726a7784a46436ad4ba8bb34cd73.png

 

I hid all remaining wires under the crow´s nest.

image.png.5a6a3bfcb95cafa8a78d222197c444d1.png

 

The mistake I made on the front mast keeping the shrouds connected to the blocks below getting it hard to work on the deck - this was avoided on the main mast and the whole shroud could be loosened to get access on working on the deck details. 

 

P2090209.JPG.d9507d6d39f62324591f9be829a7597e.JPG

 

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

Decided to skip the lantern at the rear and only have a flagpole (with the big flag):

image.png.cf33c108fa89b068306cf5602168dabe.png

 

The mizzen mast  with multiple ropes.

 

P3150219.JPG.b269264d6cd6ee6c041b0c4cc201a5b5.JPG

 

A bit clay for the anchor float ball

 

image.png.d161c8bf7fc5df493c9ae0962db7baec.png

 

 

P3160221.JPG.0a3b0d7ba0ddecdcc4f9e9699ce58d7b.JPG

 

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

Added only the upper rope and skipped the sometime used lower rope (for closing the port). Maybe I should have reduced the thickness (plastic part of the lids). The rope and hinges - to bad they are only seen when the port is closed.

image.png.ad77ca437451ad660bc10493dd6f1d85.png

 

Finally all ports done. Time to glue the balcony platforms.

P4100256.JPG.135839b0eeb885b7d9c9fdf0ea8b5145.JPG

 

P4180259.JPG.a704db4b821bcc768d623eb33bd869f0.JPG

 

 

P4120257.JPG.1119993ce8e9b72c7594bcc379649c6f.JPG

 

All flags mounted and only some small things left

- add some deck fillers - barrels, bags and cannon balls

- redo the whole bowsprit (the mast is leaning backwards)

- add a "Vasa 1628" plate to the stand

P4190260.JPG.e571ea09a97665028d406e9190b5b5bc.JPG

 

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

With the experience from doing all the mast I removed the old bowsprit mast and created a new with a small brass wire to stiffen up the mast to correlate the force pulling it backwards.

New nicer hemp yarn - Amati rigging thread (bought all from Cornwall model boats) instead of Billing boat kits cotton.

P5010261.JPG.5bab644497a8ccb28a2e72b5912ebbc8.JPG

 

Made the plaque out of modelling clay.

image.png.916a53e916043c2eb9d10394c3f6ddc0.png

 

As well as the weapon shield held by the lion figure head together with an extra lion at the very front of the bowsprit.

 

image.png.c9560866157ec607e96a499299dad5f8.png

 

image.png.600f706c0649f5baa2b4ffc8e70850f8.png

 

P6130268.JPG.ad05daf69643b9bc0ce9e9e99285ae52.JPG

 

 

P7080283.JPG.6212f969f5faf19ef66094e0776a5ebe.JPG

 

 

Could not resist making a moose horn to make the main mast more ornate.

 

image.png.5f5cfdf4efad0dd6c87480b21d551a1f.png

 

P7080278.JPG.598dd8ea55ced3af309a15e937053579.JPG

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

Some final pictures of the build - only acrylic showcase left to build - seem every other facility bought plexiglas for Covid-19 protection nowadays.

 

P7080276.JPG.e9d992eacb79bc8a3cf135b8db5447b4.JPG

 

P7080281.JPG.9c6148f37f939ac1c7c110e3c447a8aa.JPG

 

P7080288.JPG.0494ec81f2bc0189a0199d3dd4a030f9.JPG

 

P7080289.JPG.3c59140dbb750d29c73eb5aa43f31146.JPG

 

P7080287.JPG.1597e42d5e36eb361c75cc7ac77f805f.JPG

 

 

 

This is the way      /Fredrik

 

Current: Sots 1637

Finished: Wasa Cannon port

               Wasa Billing boats

Link to comment
Share on other sites

Wow i love your process !!!!!! 

Beautiful work.

"smooth seas do not make good sailors..."

:pirate41:

MY FIRS BUILD : H.M.S BOUNTY (mamoli)

SECOND BUILD :The concord stagecoach 1:12 youtube link : https://www.youtube.com/watch?v=yJzCs9umWPI 

CURRENTLY BUILD : H.M.S VICTORY (Caldercraft) : http://modelshipworld.com/index.php?/topic/15501-hms-victory-by-michael101-caldercraft-scale-172/

Link to comment
Share on other sites

Your really captured the look of this ship - excellent work indeed

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...