Jump to content

Duchess of Kingston 1778 Royal Yacht by Rustyj - Vanguard Models - 1:64


Recommended Posts

Hi All, Like Bob (Rafine) I'm in between chapters with the Winnie and the Duchess of Kingston caught my eye. I thought

it would be a great change of pace and Chris's Vanguards models have looked so good I had to give it a try.

 

I started a little while ago and have been meaning to post my progress but everything I'm in the shop I get distracted

and start working on the DOK. 

 

The hull pieces all went together very smoothly. I didn't have to adjust any and all slots were a nice firm fit. I too dry

assembled it and then used a brush to apply the wood glue.

 

DSC00062.thumb.JPG.d9c88fa140335806be3ebecedc08df84.JPGDSC00061.thumb.JPG.38a17ea2f0c6fd3a5a512a5ca096dc46.JPGDSC00059.thumb.JPG.e427dec600c819399b2daf372f67e8da.JPG

 

DSC00071.thumb.JPG.132b7601ba6c9b3396e56307f3cfd29e.JPGDSC00073.thumb.JPG.170629351ae07802e88a4efde1d2e471.JPG

 

After assembling the hull I added the fore and aft sub decks and the cross braces.

 

DSC00066.thumb.JPG.129b9879b1970f7e447f302e7efffcb8.JPG

 

DSC00067.thumb.JPG.ac9bdf2aabc9b234e87ec4404ab464f2.JPG

 

Be careful adding the sub deck. The two up right circled below are fragile and can be easily damaged like I did.

Luckily I could move them back in place and glue them and all is well.

 

DSC00068.thumb.JPG.b28082a5c666c083f804e9ba6a96bd98.JPG

 

DSC00070.thumb.JPG.637c210a4c711bd72c5760f2541ecc08.JPG

 

DSC00072.thumb.JPG.a48537c9c60373e560191b985f1558d2.JPG

 

 

Link to post
Share on other sites

Looking good, Rusty. Don't worry too much about the thin vertical pieces on bulkhead 9, these are just a leftover from an earlier idea of having the cabin doors separate, and open if the modeller wished. However, this never got passed development stage, as I feared the pear bulkheads would be way too fragile with an opening and very thin door frame (as the pear bulkhead requires very slight bending in order to fit in place), so that idea was ditched. The thin verticals are simply the leftovers...

 

I almost filled in that door area on bulkhead 9, but decided to leave it...

Link to post
Share on other sites
3 hours ago, James H said:

Looks like you've gripped this with both hands

Is there any other way? :)

 

That's good to know Chris. I got them back in place and it was good practice fixing one of what will be several heavy handed oops.

 

1 hour ago, glbarlow said:

I have Flirt and will be first in line Sphinx

Well I'll be right in line next to you!

 

I've faired the hull and the MDF sanded well but caution should be used as it is easy to remove too much if you're not careful.

Also the stem has been added in anticipation of placing the bulwark patterns.

 

DSC00074.thumb.JPG.e2035437adc780013c371765930c4db8.JPGDSC00075.thumb.JPG.cea69903311ce663c8412aca42109dc5.JPGDSC00076.thumb.JPG.afd3878c4e4ca85508ad2504c060ec4e.JPG

 

 

 

Link to post
Share on other sites

Upper bulwarks were soaked and bent around a can, blown dry and then fitted to the hull. This is

only the second time I've used a one piece bulwark pattern and it went on better than I had hoped.

I had to use some extra clamps besides the nails to get a good tight fit but I'm real happy with it.

 

DSC00077.thumb.JPG.335c9eaaa3d591372813af3d0cf15672.JPGDSC00078.thumb.JPG.1da52fbe13e78b7617123d8a4c66957a.JPGDSC00079.thumb.JPG.7da11be665e6b7c1b197a9eea0da462c.JPGDSC00080.thumb.JPG.cbba491c1cc6be4001f582acb30c5162.JPG

Link to post
Share on other sites

The first layer of planking has been completed and the outer patterns shaped and installed.

Very straight forward and went on without any issues. Did use most of my clamps to do both sides. :)

 

DSC00106.thumb.JPG.94e5f691d6e8d963c192c63d137ffc45.JPGDSC00117.thumb.JPG.e73b6ebf2d8b5eecb116301b8f78b296.JPGDSC00118.thumb.JPG.1ed84da973a9b50af3f030b1ac560948.JPGDSC00119.thumb.JPG.6e60a7df4c5dadcfdd3f4db06dc93ccf.JPGDSC00156.thumb.JPG.3a1d9aaa359759e092fc41ce24a87774.JPG

 

Now the hull is ready for the second planking and I've sorted through the provided pear strip wood getting the 

ones that the color is very similar. 

DSC00157.JPG

Link to post
Share on other sites

The hull is planked with the pear wood and I'm pleased with how it came out. 

She's been sanded with 120 grit so far. You can also see some filler where unfortunately

some of my seams weren't as tight as I would have liked. Good news is it's all below the 

water line and will be painted. This pretty much catches the log up.

 

DSC00169.thumb.JPG.f2bdef44df943315b0465774b7f69ae5.JPGDSC00168.thumb.JPG.06f593ef0f606af881023971532c1e4b.JPGDSC00167.thumb.JPG.df16b634b4435d834174a72e82ce475f.JPGDSC00170.thumb.JPG.74ddbfb2499ebd97ef1fc5cf494cc8a0.JPG 

 

 

Link to post
Share on other sites

Thanks Glenn, James, Bob, Bob again and Glenn too. Also thanks for all the likes. 

 

14 hours ago, glbarlow said:

120 grit, go big or go home

 

I always start with 120 to knock down the high spots etc. Then 180 and finish with 320. Apply a coat of WOP. After it dries I steel wool it with 0000 and apply a second coat. So I still have some sanding work ahead of me. :)

 

Link to post
Share on other sites

Next I took out the temporary beams and the MDF bulkhead tabs. Everything was sanded smooth. 

Although Chris's laser cut deck is really nice I've always enjoyed planking the deck so I decided to plank

the deck myself. I cut boxwood to the same width and thickness as the laser cut deck.

 

DSC00064.thumb.JPG.d317ee09b72ac69aa97cd27611a42914.JPGDSC00065.thumb.JPG.6ec1d20c0174a4d9dc242d36b4eb3d3c.JPG

 

I then cut the margin planks and marked the center line and commenced planking outwards from there.

 

DSC00176.thumb.JPG.1671bfe38cae3126969a81a84863c73c.JPGDSC00177.thumb.JPG.d5f87c1d8e522f971a4ad39b5e5bf93b.JPGDSC00178.thumb.JPG.9fc520506830b31e74655fbf5442a80c.JPG

Link to post
Share on other sites

I've completed planking the deck. It was a fun project and I'm happy with how it came out. 

 

Here it is rough sanded with no finish.

 

DSC00179.thumb.JPG.18524a3e2bafdc2c439d94265420b0dc.JPGDSC00181.thumb.JPG.f6af53e1e96fe35397594453aea96a76.JPGDSC00183.thumb.JPG.877b76277d8324c768e6144442e242a7.JPGDSC00184.thumb.JPG.593e5668106a3f0e5022de8d792a9d27.JPG

 

And here it is sanded with 320 and a coat of wipe on poly.

 

DSC00186.thumb.JPG.ef0547fd66ff1f4a903dce27f324ae0d.JPG

 

I will lay Chris's laser cut deck back over my deck to mark off the various precut hole, hatches

etc. to make sure they are in the correct location on my deck.

Link to post
Share on other sites

Thanks Glenn and Jean-Paul and all the likes too!

 

Trying to catch up the build log.

 

Here you'll see the inner bulwark patterns, the outer bulwarks painted blue and red, upper fore and main upper rail patterns clamped in place to dry.

 

DSC00187.thumb.JPG.29c801c2db4879de078037eb74b86463.JPGDSC00188.thumb.JPG.85b0a220c7e7fe6f6026ce00bb6fd2fc.JPGDSC00192.thumb.JPG.3fd9377ea3693ccfa99d4f2fc01a4916.JPG

 

Now the fore mid and aft gunwales have been painted and glued in place.DSC00193.thumb.JPG.be6c99372d34ed289da0b113673a2a79.JPG DSC00194.thumb.JPG.f34a4377a09cf1d5f8b883749880ce8d.JPG

 

Here are the main upper rails and wales formed and painted and glued in place.

 

DSC00195.thumb.JPG.838e2b1372e73ed0b3ba959f8692f1b5.JPGDSC00197.thumb.JPG.d2407131e099452ad192dec45dd3414e.JPGDSC00198.thumb.JPG.f579c6f608025a4d52f1c589b5f1894b.JPG

 

Edited by Rustyj
Link to post
Share on other sites

Now a word of warning. Chris has done some fantastic laser work but because of this some

pieces are very fragile. Please use caution when handling some of the pieces. I knocked off a

piece inside the red circle. Luckily I found the piece and was able to glue it back on.

 

DSC00195a.jpg.58eeba33be2802d1404a109778d992df.jpg

 

So let my meat hooks be an example of what not to do! 🤪

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...