Jump to content

Polaris by BranPie - OcCre - 1:50 - First ever wooden ship build


Recommended Posts

My very first build. Shopping around for a kit for that first build I really wanted to get HMS Beagle from OcCre but from watching some of the build videos on YouTube I decided I'd be way in over my head with that one. No matter, this way I have something to look forward to if I really take to the hobby.

 

I've already the read the completed - and ongoing - build logs from Havelock, LHSmith and Spongebob22 (and am expecting at least one more log to follow soon). I've learned a lot from those and am sure that I'll learn a lot more from them in the following months.

 

So now for my build. I started out yesterday, sorting and counting everything to make sure my set was complete. It is 🥳 

Then went on to cutting out all the pieces to build the hull. Saw that the false keel had a small bend to it (picture). It's actually worse than it looks on the picture, so I was wondering if there's some I could and should do to fix that since I read that Havelock had a similar issue which led to some problems attaching the deck and the bow not being completely centered and so on...

 

433794518_Falsekeelcrooked.thumb.jpg.5f00fc69b00387f1f90e64a9906aee46.jpg

 

If there's nothing I can do I'll just continue and follow Havelock's lead on fixing things as I go. His model turned out great in the end. 👌

 

Oh, I also "built" the little stand thing (don't know the proper name, have a lot to learn). Still requires quite a bit of sanding and all but I really wanted some "result" yesterday :) 

Edited by BranPie
Adding some info to topic header
Link to post
Share on other sites

So, I started on fixing the bulkheads to the the keel tonight. I was unsure about getting the bulkheads nice and square because I don't have any tools for that and because of the warped keel. So I decided to glue the bulkheads and then (gently) clamp the deck on top of them. My logic being: if it fits now, it should fit later... 🤞

 

20201219_203006.thumb.jpg.2e0b39e7d3508708d919b72a3c7f84c1.jpg

 

First 4 bulkheads are drying now. I'll do the rest tomorrow.

Edited by BranPie
Link to post
Share on other sites

The false keel's warping & twisting is an issue that many of us already have encountered.

Therefore I'd like to submit a question to all members reading this : as the bulkheads require some bevelling, can the load of bevelling, be it on the port or starboard side, partially compensate the problem ?

Although caution is required, is it worth a try ?

 

It's just an idea.

Link to post
Share on other sites

In the initial phases of the build I use metal angles screwed on a wooden board. Make sure you position them so that they fall inbetween the frames. Make it a tight fit so that the false keel slides inbetween them. That will keep the keel straight while assembling the frames. You can then place spacers inbetween the frames to create a firm structure that will keeps its shape (much better). I also make sure it is positioned on the board when installing the first couple of planks on either side. If only I had a picture to show you, but there are many building logs here that will show you what I mean.

 

I would never (ever) compensate by bevelling because you will end up with a different hull shape, very likely not symmetrical.

Link to post
Share on other sites
5 hours ago, Gr8teful Rick said:

Hello BranPie,

I'm starting Polaris also, and will start a build log in the next day or two. Need to straighten the keel first. Seems like a common problem with this kit. I will be following your build.

Yes, I'd seen that in the other Polaris logs that you were waiting for your kit. Will be following your log when it comes. Glad there are others I can learn from. How are you going to straighten the keel?

 

I decided to go ahead and start assembly because the warping isn't too bad and some tryouts have me believing I can fix things when permanently attaching the deck. Because of Havelock's log I'm aware of the issue (I probably wouldn't have thought to check otherwise) so at least I can try to avoid more problems. It probably won't be perfect, but hopefully it'll be good enough. 

Link to post
Share on other sites

Have been busy planking the deck for a few days now. Decided to make things hard on myself by not following the instructions. So I'm not laying the "planks" in one piece over the deck and then drawing the separations. I'm cutting the boards to length and using a 3 butt shift system. I think it's turning out quite well. 

 

20201223_205433.thumb.jpg.da52f6050902197431417167e66449b5.jpg

 

This is a lot of work. And pretty hard. Those strips of wood are not straight! At all! 

Is there something I should be doing about that or is just forcing them in place the way to go?

 

But I'm having fun. So all is good I guess. 

Link to post
Share on other sites
On 12/20/2020 at 3:04 AM, BranPie said:

How are you going to straighten the keel?

Neither of the two techniques that I've tried has worked. I found some suggestions here at MSW and have tried a couple of them a couple of different ways. Both techniques "worked" for a few hours, but the warp always came back. So then I took the OTHER advice from builders and contacted OcCre for a replacement keel. It's on its way and I just have to wait for it. It better be straight!

Meanwhile, I'm building Doc Blake's keel clamp just so I'm building SOMETHING!

https://modelshipworld.com/topic/20229-home-made-keel-clamp/?do=findComment&comment=646093

Link to post
Share on other sites

I ran into a little problem with the decking. A lot of the wood strips for the deck widen from 5 mm on one end to 6 mm at the other end. I thought about dealing with that by just alternating the direction of the strips as I lay them.

BUT, is there an achievable way to correct those strips and make them 5 mm wide along the whole length? I have very little tools, this is my first build after all...

Any suggestions are welcome.

Link to post
Share on other sites
  • 2 weeks later...
Posted (edited)

Well I've finally finished my deck planking. Just need to smoothen the surface and then I can treat it with the dye supplied with the kit. 

 

20210106_201554.thumb.jpg.3baab49f3b413f4ef0abbfedd4657f9d.jpg

 

While I wait for the scrapers I ordered to tackle this job, I'll be starting on sanding down the keel and bulkheads to mount the deck (or I'll be painting walls and doors at home 🙂 ). 

Edited by BranPie
Picture went missing
Link to post
Share on other sites
  • 2 weeks later...

Been going at it slowly but steadily. Filed down the transom to get it flush with the false keel.

20210112_204309.thumb.jpg.56f455e6311c1dfd2dba3243692d167e.jpg

 

Attached the deck to false keel and bulkheads. Did a nasty, dirty job but it stayed stuck. So all in all not too bad. Will need to plan this better on a next project though... Then I glued the reinforcements to the false keel and started sanding them down in preparation for the first planking.

 

20210118_193619.thumb.jpg.8e2a93906fa0ea6ebb29aed7f8d505e0.jpg

 

And then I messed up. I don't really have a workspace for now. Basically, I do my modelling on the dinner table when my 18 month old has gone to bed. That means I need to get everything out and put everything away every time I work on my model. A few days back I did something stupid. I'd used a wet rag to clean up some glue and when I put everything away I placed my model, deck down, on that wet rag. Result: parts of my deck have curled up due to the humdity. The picture shows the worst one, but there are actually three zones that now need repair (it's actually much worse than it looks in the picture). So, I now know what my next job is. Breaking up my planking and fixing that. Lesson learned...I hope.20210118_193534.thumb.jpg.8ffd4dcd31804b491e88b788fd0c0821.jpg

Link to post
Share on other sites
9 minutes ago, BranPie said:

A few days back I did something stupid. I'd used a wet rag to clean up some glue and when I put everything away I placed my model, deck down, on that wet rag. Result: parts of my deck have curled up due to the humdity. The picture shows the worst one, but there are actually three zones that now need repair (it's actually much worse than it looks in the picture). So, I now know what my next job is. Breaking up my planking and fixing that. Lesson learned...I hope.

That is unfortunate as your deck looks really well done. Sounds like you have the right attitude on it though and I imagine you have a separate bin for damp rags now 🙂

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...