Jump to content

Sovereign of the Seas by Denis R - FINISHED - Mantua - 1:78 scale


Recommended Posts

  • 2 weeks later...

Hi All

 

Just finished furling the sails on the mizzen mast yards/spars.

 

Next is to assemble them onto the mast.

 

Denis.

post-303-0-09524600-1405321978_thumb.jpg

post-303-0-05716300-1405321991_thumb.jpg

Link to comment
Share on other sites

She looks great, Denis. Are you planning to furl all the sails? I am a big believer of sails on a sailing ship, somehow the ship looks incomplete without it.

Regards, Keith

 

gallery_1526_572_501.jpg 2007 (completed): HMS Bounty - Artesania Latina  gallery_1526_579_484.jpg 2013 (completed): Viking Ship Drakkar - Amati  post-1526-0-02110200-1403452426.jpg 2014 (completed): HMS Bounty Launch - Model Shipways

post-1526-0-63099100-1404175751.jpg Current: HMS Royal William - Euromodel

Link to comment
Share on other sites

Hi Keith

 

All the sails on the SOS are furled , this is the last set to do.

 

I think about another 6-7 weeks and she will be all finished.

 

Just the supports for the hull to do.

 

Denis.

Link to comment
Share on other sites

Link to comment
Share on other sites

A great build log. I am just dropping you a quite note to say thanks for some great ideas now for how to furl some of my sails on my build...I still yet have to face the sewing machine driving lessons from my Wife!!

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

Hi Ian

 

Great part of my home country.

 

You are lucky your wife will help you with the sewing ha ha.

 

Mine said you are on your own it's your build you do it.

 

Denis.

Edited by Denis Pink
Link to comment
Share on other sites

Hi Ian

 

Great part of my home country.

 

You are lucky your wife will help you with the sewing ha ha.

 

Mine said you are on your own it's your build you do it.

 

Denis.

my wife just read this, a completely different reaction to that, - words to the effect that i would not be allowed within 100m of HER sewing machine

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 

 

 

HMHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   U552 German U Boat - Trumpeter - 1/48  Amerigo Vespucci     1/84 - Panart-   HMS Enterprise  -CAF -  1/48     

Finished     

St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished   Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Link to comment
Share on other sites

...

 

Mine said you are on your own it's your build you do it.

 

...

 

In my home, the hardest metal thing is - the  needle for sewing ...

In progress:

CUTTY SARK - Tehnodidakta => scratch => Campbell plans

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653

Content of log :

http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381

Past build:

Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic

Link to comment
Share on other sites

Hi Kevin

 

My wife told me to get my own sewing machine :(  :(  :( :(  :P .

 

Are well things we have to do to build the models :D  :D  :D  :D  :D  :D  :D  :rolleyes: .

 

Denis. 

Link to comment
Share on other sites

Hi Denis, very very nice work on the sails.  Having gone through sailmaking on my Badger, I know how much time and effort it takes to add them to the model.  I love the look and color of them - very well done!

 

Can you also send me a PM of what material you used?  I used the thinnest cotton fabric I could find at my local fabric shop, but it was probably a bit too thick for my liking.

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Hi Denis

 

Why the secrecy over the sail material? Can you tell us all or PM me too please?

 

Thanks

Steve

Built:

Charles W. Morgan - Artesania Latina  1/50

Pilgrim 40 Trawler - Scratch  1/24

RCMP 40' Trawler - Scratch  1/24

Flower Class Corvette - Matchbox/Revell 1/72

 

Current:

HMS Serapis - Aeropiccola 1/60

 

Future:

NEW! Just Added: Friesland - Mamoli  1/75

San Felipe - Mantua/Panart  1/75

BonHomme Richard - Aeropiccola  1/50

Wasa - Corel   1/75 

HMS Victory - Mamoli  1/90

HMS Unicorn - Corel  1/75

 

 

 

Link to comment
Share on other sites

Hi Steve

Sorry mate no secrecy at all.

 

My wife was given 2 rolls of calico by the chemist at the place she worked as a purchasing officer. The rolls are about 1m in width.

 

I cut about 2m off one roll, to make sure the calico did not shrink I washed it and let it dry then washed it again and let it dry.

 

I cut the pattern of the sails out, then stitched them up.

 

Next job was boil 1lt of water add 3 teabags leave for 20 minutes take teabags out let water cool.

 

Put sails in for two and half hours, take out and lay flat to dry.

 

Sew 1.75mm rope to the top of the sail with invisible thread.

Sew to yard/spar with 0.30mm rope.

 

Wet sail then furl and tie them off with 0.10mm rope.  Mix PVA glue up with water 50/50 apply to sail let it dry.

 

Denis.

Link to comment
Share on other sites

Denis, Love you work.

 

To me, It took a lot of guts to become the first, I've seen, to furl the Sails.

For now, the rest is pure Glory.

 

Inspired by you, when my time comes, I also will Furl the Sails on my SOS to show off her

Beautiful Hull, The Rigging, which is the Glue that binds her, and while her Sails are at peace,

we get to eye & savour her Deck and her fittings while subtly being blinded by her pristine

adornments & artefacts.

 

Well done, look forward to seeing her finished.

 

- visi

Edited by Visi
Link to comment
Share on other sites

Hi Visi

 

First thank you so much for them very kind words ( I don't deserve such praise ).

 

I did not know you was building the SOS.

I will send you my e-mail address so we can swop photos OK.

 

I am helping a man in the Northern Territory's with his SOS.

 

So don't be a stranger to my log.

 

Thank you again.

 

Denis.

Link to comment
Share on other sites

Hi all

 

Just fitted the top yard but will improve the ropes when I have to tie them to the belaying pins.

 

Denis.

post-303-0-27991800-1405411312_thumb.jpg

Link to comment
Share on other sites

hey there Den........making some great progress, I see! :) I'm in the same boat......I make my own sails. I'll have to look at calico......to find the material I was looking for, I turned a Hobby Lobby upside down......the lady that helped me was a god-send! it's hard to find material that is scale friendly and non transparent :) very nice work!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Hi all

 

More yards fitted to mizzen mast.

 

Just the mizzen lateen yard to fit and will do that tonight.

 

Next is glue to deck.

 

Denis.

post-303-0-56772900-1405659053_thumb.jpg

Link to comment
Share on other sites

nice job on setting the Mizzen up. I think it's rather neat how you've done all this before they are cemented in. I know that some install the masts without cement......free floating. but I would think it would depend on the mast rootings or if rake has to be preset. I might try this with the Half Moon......but unsure how it will work out....I'll need to jig them for rake. great work Denis!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Hi All

 

Oh dear I have made a mistake I put the sail on the cross jack.

 

Thanks to Vince pointing this out to me saying the SOS did not have the sail on the cross jack yard/spar.

 

Again thank you Vince for pointing this out to me.

 

Denis.

Link to comment
Share on other sites

Hi all

 

Just dry fitted the mizzen mast into the deck will glue it in place tonight.

 

Sorry about the photos.

 

Will take the model out of my work room and take better photos.

 

Denis.

post-303-0-63388000-1405844773_thumb.jpg

post-303-0-27081400-1405844789_thumb.jpg

Link to comment
Share on other sites

Wow Denis!

 

I thought the furled sails looked perfect in your previous pictures, but to see them fitted just takes it to a whole new level!!

 

The only apology you need to make over your photos is that there isn't more of them haha.  Your Sovereign of the Seas just looks so good!

Link to comment
Share on other sites

super progress Denis.......that lanteen looks very well done!

I yam wot I yam!

finished builds:
Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue
Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions
M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller
Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build

Billing T78 Norden

 

in dry dock:
Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20
Billing's Half Moon 1:40 - some scratch required
Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400
Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...