Jump to content

Norske Løve by Blue Ensign - FINISHED - Billing Boats - 1:75 scale - an ancient build


Recommended Posts

There are scant details on MSW of builds of this iconic Billing Boat kit, and periodically questions arise, often concerning inherited or partially built models requiring completion or restoration in the absence of plans or instructions, which in the case of Billing Boats were somewhat thin.

 

So, in the spirit of giving some images that may help, I post here my Norske Løve story.

 

I must have posted it somewhere before but can’t for the life of me remember where or when, but I do have my original log and photos.

A cautionary note, this is a model I made over forty years ago, so the standard of fittings, and the ravages of dust have taken its toll on the condition.

 

If I knew then what I know now I could certainly have made a better job of her but she remains a model for which I still have great affection, and I have resisted the temptation to upgrade her.

 

Those not familiar with the finer points of our art tend to be seriously impressed by the sight of her.

 

( Norske)  Løve Story

 

More years ago, than I care to remember, before my office was a den of computer stuff, and before the digital age, I had a yen to build a large scale wooden 18th century warship.

 

In those days it was either Billing Boats or Billing Boats, and as I browsed through their catalogue my eyes alighted on Norske Løve.

It was the image of the modeller putting the final touches to the model that grabbed my attention, I wanted to be that guy.

1697667231_bILLINGBOATCAT1.thumb.jpg.1840dc017f48a62aef7eea3a6c2fe193.jpg

BB Cat cover

Yes, I still have that original catalogue, in those days I actually went to a model shop, can you believe it!

 

Pity I didn’t have the internet resource back then, but I did have the Longridge book and perhaps more importantly the Masting and rigging book by James Lees.

 

Given that the Norske Løve was launched in 1765 it immediately struck me that the round tops provided in the kit, were oddly out of period, more 17th century than 18th

1145637233_BILLINGBOATCAT2.thumb.jpg.bae4a299eae2f3048de4810095281bf3.jpg

The masts and tops were therefore scratch built to proportions given in the Lees book for ships of the correct period.

The other main area that gave me concern was the head. In common with many wooden kit models this is a weak area with a less than realistic rails set up.

149433436_NORSKELOVEHEADRAILS.jpg.ce51806326f73ccb5705e3bb4e98e614.jpg

Catalogue shot of the bows

 

These were therefore also scratch built.

 

I made other ‘modifications’ not necessarily in accordance with the plans, such as a skylight on the Poop and removeable skids to house boats which were not provided with the kit.

 

Billing at the time (and probably still are) were in the habit of providing some plastic fittings for their kits such as blocks and Deadeyes, decorations etc.

 

I seem to recall that the fittings kit was a separate purchase to the main build kit.

544721528_scan0001(2).thumb.jpg.edb49381dc9ff7947b4d5de8eb8d7efa.jpg

This is Billings catalogue shot of the completed model.

 

The build took me a couple of years, and my office resembled more of a joiners shop than an office. Drill stand and vice screwed to the desk top, wood turning model lathe and dremel permanently plugged in where now the printer and computer stuff reside.

 

Everything was covered in a fine film of dust, but boy how I enjoyed that build.

 

When completed the model sat in a lighted cabinet that filled one wall of the office and that’s how it stayed for some years.

With the arrival of computers and the need to use my office for its proper purpose, everything was changed. Away went the cabinet and all the modelling stuff.

100_1153.thumb.JPG.4d49cb1e89ca2cd8c9252ab22a84ab94.JPG

1153

 Norske Løve then proudly sat uncovered on a long chest of drawers, where it resides to this day.

 

Strangely things have come full circle and in retirement my office once again resembles more of a workshop, but I don’t think the resident equipment would appreciate a return to the heavy sawdust days.

 

So here is the photo collection of my interpretation of Norske Løve,

100_1120.thumb.JPG.d378277979cbf3d78ba0dde4de203163.JPG

1120

100_1127.thumb.JPG.9b5720305150eb58cfe157aaf08fed0d.JPG

1127

100_1134.thumb.JPG.3975a04161e61cd709062370d9ea8ee9.JPG

1134

100_1138.thumb.JPG.2b68ebdb9c5804ca03b3da5bc789d719.JPG

1138

100_1139.thumb.JPG.42e00655a37549467b3a39145ddcf6a3.JPG

1139

The head rails were scratch built using yellow pine, but there were several breakages before I got a satisfactory set. The Lower and Middle rails are mortised thro’ the head timbers, and the Main rail rebated into the head timbers.

1153473293_004(2).thumb.JPG.f8e1732adc86e1bde4e0598f680586b8.JPG

04 02

I recall the exercise being long, slow, and frustrating.

100_1151.thumb.JPG.1ce882949e25480ac8f952d89cf45364.JPG

1151

I particularly like the stern and Quarter galleries with their glazed lights, one of my pet dislikes with wooden kits are false windows or even worse stuck on windows, such as with the Mantua Le Superbe that lies forlornly in the loft.

 

This is one area where Billing have done a good job, there was very little tweaking to this area of the build.

100_1140.thumb.JPG.606e837100dda0b6c66d3c94b8e453d7.JPG

1140

100_1170.thumb.JPG.a01e5d739bc40f58cce1aa304780ff06.JPG

1170

The modified tops, scratch built to proportions given by James Lees. The plastic rigging blocks supplied by Billings were replaced by boxwood versions.

1234236783_004mizenclueandsheet.thumb.jpg.2a32dc70f3f9e2957718c2824ea22409.jpg

004(2)

 

100_1133.thumb.JPG.e64c5483eb63207942797316342bfdd3.JPG

1133

 

100_1152.thumb.JPG.0e66e73006252b6b56eea44603a57a48.JPG

1152

The main difficulty with single planked hulls such as this is that there is little scope for cocking it up if you don’t want to hide it with paint.

I also have an aversion to stub guns so the lower ports are closed.

1821961716_008(2).thumb.JPG.a1416091cf0847741ebbbb387ba0e817.JPG

008(2)

010.thumb.JPG.05a619a3ab595dec31a17ca27d658b46.JPG

010

The Poop was modified by the addition of a skylight, and the Ensign hand painted on cotton. The simplicity of the Danish flag lends itself to this method.

 

1363737184_007(2).thumb.JPG.1841b369bedcdb9d1bc75a104b2a51fc.JPG

007(2)

I think the anchors were aftermarket purchases.

 

The Boats

002.thumb.JPG.a569429a8df00b21401f647c86a1dbd2.JPG

002

005.thumb.JPG.274518955dd44e7a400d3079c4ad6d03.JPG

005

Boats were not supplied so I had to create my own.

100_1132.thumb.JPG.ca7f94e71e4dbf166fde21e41ab74ebd.JPG

1132

100_1173.thumb.JPG.fc01057493464d803242e55a985c9c46.JPG

1173

The deck fittings are mostly removeable to assist cleaning which is evidently overdue when this photo was taken.

100_1145.thumb.JPG.bca56681ac9e50294d064806b6f7767b.JPG

1145

Dust build up is clearly apparent here.

100_1135.thumb.JPG.559ced8d355d2d6ea313e8047d80c771.JPG

1135

 

I really prefer models out of cases, they have so much more impact, and 1:75 scale allows for reasonable cleaning access which in this case takes about three hours every few months or so.

 

I hope those who cross paths with this kit get some benefit from this vintage build.

 

Regards,

 

B.E.

22/03/21

 

 

 

 

 

 

 

Link to comment
Share on other sites

A thing of beauty BE. Having started with Billing Boat myself years ago, I have often wanted to build this kit myself. I now have the modern version of the model in my stockpile of models yet to be built. The fittings have changed somewhat and the blocks and deadeys are now wood. But the plastic lion hasn't changed one bit! Seeing the photos of your Norske Love has definately given me some inspiration to start mine. Thanks for showing them off!

Peter

Build Log: Billing - Cutty Sark

 

In The Gallery: HMS Unicorn, HMAV Bounty, L'Etoile, Marie Jeanne, Lilla Dan, Zeeschouw "Irene"

 

A Toast: To a wind that blows, A ship that goes, And the lass that loved a sailor!

Link to comment
Share on other sites

Link to comment
Share on other sites

  • 7 months later...

Glad you shared this 'ancient' build BE, you really managed an excellent result and the modifications seem spot on.  The approach and the detail shown on the modified headworks is very helpful and insightful, I can only imaging how long this took to achieve but the results are fantastic.

Cheers,
 
Jason


"Which it will be ready when it is ready!"
 
In the shipyard:

HMS Jason (c.1794: Artois Class 38 gun frigate)

Queen Anne Royal Barge (c.1700)

Finished:

HMS Snake (c.1797: Cruizer Class, ship rigged sloop)

Link to comment
Share on other sites

Thanks Jason, it's of its time and not up the standards of todays fittings.

Those headworks I just carved by hand out of yellow pine, I can still recall how many breakages I had to get a set.

Still,  I do have an affection for her, and as the largest ship model in my collection she  has a certain presence. 

As an uncased model periodic cleaning is a bit of a pain,  and seems to be less effective each time I do it.

 

Cheers,

 

B.E.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...