ClipperFan Posted August 11, 2021 Share #181 Posted August 11, 2021 Rob, I'm beginning to strongly suspect that at the scales you and Vlad are working at, to get some of these diminutive details you're venturing into Lloyd McCaffery territory! Vladimir_Wairoa 1 Quote Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 11, 2021 Author Share #182 Posted August 11, 2021 (edited) Hello, Some update here. Basically, after tremendous work , body od the ship IS practically finished with Minor work to do finishing planking stern counter. I must say it was really challenging journey for me, i wouldnt complete IT as my first or second model no Chance. I must say im so Happy i didnt use any tool for bending - was not necessary! Fór the way i did IT. At this point glory profile IS finished Up to the monkey rail....m id like to stress few adjustments. I widened fcastle and poop rail Columns for simple reason - topgallant cover must sit on something thicker than or 1.5 milimeter surface. I plan to start with decorative moldings tomorrow so hopefully there Will be a lot to commemt ( gopefully not swear anyway i plan to use Also miniatures molding on fancy rail for same very reason - widen surface to sit the top on IT...I made little sanding toop to sand famous 8 planks Strike IT Worked. Sheer profile from inner side already decorated. I know i know that pattern. I Will try better....anyway, i ditched idea of expensive boxwood. IT Will be painted so Well Worked like Wood makes almost same output with fraction of cost... Fingers crossed as adding pirails main rail and monkey from the innner side. Few pics from now. V. Oh as you Can see i practically almost destroyed bowsprit at this point - Will have to repair IT. No Chance i could work on stand. I have to hold the Boat many times , turn IT vigorously when sanding i coundnt work otherwise. and sometimes crash IT.... Edited August 11, 2021 by Vladimir_Wairoa Add mtaylor and GrandpaPhil 2 Quote Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 12, 2021 Author Share #183 Posted August 12, 2021 This IS how IT Will be.. So many gaps to fill around Columns...its already line upon line ..but IT looks quite a lot real to me. I Made main rail mold scraping pattern ...thick and thin strakes... Main rail and thinmer pinrail below attached. Im trying smallish molding on monkey rail how IT Will look like. Not sure...looking from above when top cover Will be added there wont be visible a tímy bit on topgallant rail but from deck perspektíve pretty much .....what you think? V. GrandpaPhil, gak1965 and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 12, 2021 Author Share #184 Posted August 12, 2021 (edited) Complete look Up from waterways, sheerline, big Columns, pinrail, main rail, fancy rail and cover....without fancy rail inlays and upper cover decoration on mold. Layerv upon layer.. Ať this point i start thinking She was overdecorated. Nope, Ohh i love it. Starting fancy rail inner decoration... Edited August 12, 2021 by Vladimir_Wairoa Add mtaylor, GrandpaPhil and Snug Harbor Johnny 3 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted August 12, 2021 Share #185 Posted August 12, 2021 That's looking magnificent Vlad. Your trim work is well done. I bet you are getting exhausted with the sanding that is required. Sweet...just sweet. Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 12, 2021 Author Share #186 Posted August 12, 2021 ... mtaylor and GrandpaPhil 2 Quote Link to comment Share on other sites More sharing options...
ClipperFan Posted August 12, 2021 Share #187 Posted August 12, 2021 On 8/11/2021 at 8:33 AM, rwiederrich said: Yes...it is always a challenge for the modeler(Namely myself) to forgo details that at a certain scale would either be impossible or impractical. Nothing worse then adding a detail that is out of scale. However..in some cases it is possible to get away with it, because you can mask the error either in quantity or by way of simple communal acceptability. A good example is fudging with copper plate scale for your model. Personally I expect to attempt to replicate the cabin moldings and box work as authentic as possible....and if not, I will employ the skill of illusion and mimicry. My coat of arms.😄 Rob Rob, there's a noble history of highly appreciated art trickery "T'Rompe L'Oyle" literally meaning "trick the eye". I actually enjoy well employed 3D fakery, such as you see in nature dioramas where it's challenging to determine where the material foreground ends and a cleverly mimicking painting begins. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 12, 2021 Author Share #188 Posted August 12, 2021 ... mtaylor, GrandpaPhil and reklein 3 Quote Link to comment Share on other sites More sharing options...
ClipperFan Posted August 12, 2021 Share #189 Posted August 12, 2021 3 hours ago, Vladimir_Wairoa said: Complete look Up from waterways, sheerline, big Columns, pinrail, main rail, fancy rail and cover....without fancy rail inlays and upper cover decoration on mold. Layerv upon layer.. Ať this point i start thinking She was overdecorated. Nope, Ohh i love it. Starting fancy rail inner decoration... Vladimi are you sure you're not slipping in some work being done on an actual ship just to fill in your progress on this model? 😉 Wow the detail work is amazing. It will look even more so when you finally add the t'gallant Rail which we all now know is solid. Vladimir_Wairoa and mtaylor 1 1 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted August 12, 2021 Share #190 Posted August 12, 2021 56 minutes ago, ClipperFan said: Rob, there's a noble history of highly appreciated art trickery "T'Rompe L'Oyle" literally meaning "trick the eye". I actually enjoy well employed 3D fakery, such as you see in nature dioramas where it's challenging to determine where the material foreground ends and a cleverly mimicking painting begins. In model railroading it's called *Forced Perspective*. On my bench it's called Paint.........😄 Rob mtaylor and ClipperFan 2 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 13, 2021 Author Share #191 Posted August 13, 2021 (edited) How did i make grooves. I must say i still somehow struggle with molding grooves. Finally i think i found a way that satisfyingly brings baswood almost to 95 percent od boxwood with no fuzzies. Well IT Will never match IT but.... How did i go. 1. Slight TRIM of edges with 270 grit. 2. Thin line with scraper. 3. Widenijg line with thicker point of scraper. 4. I Made sharpened Stick of hard Wood but blanded tip of IT. I run IT as last and here are the pics. Those are pretty macro so by eyesight there IS basically no fuzz. I mušt check how others do IT but fór the moment im Happy. There IS one smaller 1/3 grooves and one 2/3 fór the glory sheer. Edited August 13, 2021 by Vladimir_Wairoa Add Tigersteve, GrandpaPhil, mtaylor and 1 other 4 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted August 13, 2021 Share #192 Posted August 13, 2021 Vlad....your results are wonderful...you have been able to successfully create very convincing and accurate moldings and they look amazing on the ship. Just a great job......Congrats. Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 13, 2021 Author Share #193 Posted August 13, 2021 13 minutes ago, rwiederrich said: Vlad....your results are wonderful...you have been able to successfully create very convincing and accurate moldings and they look amazing on the ship. Just a great job......Congrats. Rob Much apreciated Rob. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted August 13, 2021 Share #194 Posted August 13, 2021 I was wondering when you were gonna get to adding the top rail trim that runs along to the top of the bowsprit. Sweet work. The topgallent or monkey rail is solid...boarded on its internal side...yours is still open to the framing....is that an oversight or how you interpret it? Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
ClipperFan Posted August 13, 2021 Share #195 Posted August 13, 2021 Vladimir I'm having a challenging time just trying to draw these cleanly, let alone recreate them in 3D. Excellent artisan craftsmanship! Vladimir_Wairoa and mtaylor 1 1 Quote Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 13, 2021 Author Share #196 Posted August 13, 2021 (edited) 1 hour ago, rwiederrich said: I was wondering when you were gonna get to adding the top rail trim that runs along to the top of the bowsprit. Sweet work. The topgallent or monkey rail is solid...boarded on its internal side...yours is still open to the framing....is that an oversight or how you interpret it? Rob Rob, frankly, im not really sure what solid monkey rail means. I had really though tíme to think Bulwark and Columns sizes with calculating space for rails as i almost so so reached top of bowsprit and little above. This monkey rail IS tad little Higher at stern side a little narrower ať how. Just to fit in nameboard. but finally im Happy overal. IT was really challenging as i had to Keep sheer angle always samé as buidling Up from IT ....there still IS plenty to revise as navalhood plate goes under molding so i Will have to repair that part - i just forgot , but i want to finish this All procedúre in one to and have long long deserved break before i paint. V. Also there get s one " mistake" to fall IT such- you figured probably that main rial should be samé thickness more less than sheerline mold but i had to Made IT tad thinner to make monkey rail wide enough and to Keep rest in good corelation sizewise.... Edited August 13, 2021 by Vladimir_Wairoa Add mtaylor 1 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted August 13, 2021 Share #197 Posted August 13, 2021 31 minutes ago, Vladimir_Wairoa said: Rob, frankly, im not really sure what solid monkey rail means. I had really though tíme to think Bulwark and Columns sizes with calculating space for rails as i almost so so reached top of bowsprit and little above. This monkey rail IS tad little Higher at stern side a little narrower ať how. Just to fit in nameboard. but finally im Happy overal. IT was really challenging as i had to Keep sheer angle always samé as buidling Up from IT ....there still IS plenty to revise as navalhood plate goes under molding so i Will have to repair that part - i just forgot , but i want to finish this All procedúre in one to and have long long deserved break before i paint. V. Also there get s one " mistake" to fall IT such- you figured probably that main rial should be samé thickness more less than sheerline mold but i had to Made IT tad thinner to make monkey rail wide enough and to Keep rest in good corelation sizewise.... OK..... Look forward to further progress... Rob Vladimir_Wairoa and mtaylor 2 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 14, 2021 Author Share #198 Posted August 14, 2021 Ok gentlemen. towel trown in ring. Greek goddess. only if i know how to make her :)) challenge accepted but....only going to start thinking about it. im going to soak myelf in ideas. till i come up with something to discuss than V. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted August 14, 2021 Share #199 Posted August 14, 2021 6 hours ago, Vladimir_Wairoa said: Ok gentlemen. towel trown in ring. Greek goddess. only if i know how to make her :)) challenge accepted but....only going to start thinking about it. im going to soak myelf in ideas. till i come up with something to discuss than V. Throwing in the towel? What does that mean exactly? Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
rwiederrich Posted August 15, 2021 Share #200 Posted August 15, 2021 (edited) Not to throw fuel on the fire, but how will you fade the plank sheet into the top molding of the naval hood…….they are one in the same….? Sorry, but I noticed this a little while ago. I’m sure you have an ingenious plan in store to show off your awesome wood working skills Rob Edited August 15, 2021 by rwiederrich Vladimir_Wairoa 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 15, 2021 Author Share #201 Posted August 15, 2021 4 hours ago, rwiederrich said: Not to throw fuel on the fire, but how will you fade the plank sheet into the top molding of the naval hood…….they are one in the same….? Sorry, but I noticed this a little while ago. I’m sure you have an ingenious plan in store to show off your awesome wood working skills Rob Good observation Rob. definite mistake i made. i will try to unglue front bit of molding. but i will also have to add little piece on molding so there will be joining gap. ill try to make it invisible. still far cry from that as Ill have to contact my laser cut guy for ornamentals...trowing towell in boxers arena = accpeting challenge as we use to say here... mtaylor 1 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted August 15, 2021 Share #202 Posted August 15, 2021 9 hours ago, Vladimir_Wairoa said: Good observation Rob. definite mistake i made. i will try to unglue front bit of molding. but i will also have to add little piece on molding so there will be joining gap. ill try to make it invisible. still far cry from that as Ill have to contact my laser cut guy for ornamentals...trowing towell in boxers arena = accpeting challenge as we use to say here... Oh….glad to hear. I always understood, Throwing in the Towel to mean your giving up, on carving the figurehead. Can’t wait to see what you have in store next. Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 15, 2021 Author Share #203 Posted August 15, 2021 8 minutes ago, rwiederrich said: Oh….glad to hear. I always understood, Throwing in the Towel to mean your giving up, on carving the figurehead. Can’t wait to see what you have in store next. Rob Rob, ill try modeling out of selfdrying clay....i think its too small for carving. way too small...at least for me. but atill bigger than yours. 32 mm in length/ tall. 1 &1/4 of inch. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
ClipperFan Posted August 16, 2021 Share #204 Posted August 16, 2021 Vladimir, if it helps, I can do sketches of Glory's Figurehead at the 1 1/4" scale you need. Another modeler, first name Doris works with material called 'plasticine' which she sculpts into incredibly lifelike figures that she uses to populate her vessels made of card. One of her latest creations is "Royal Caroline." mtaylor 1 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted August 16, 2021 Share #205 Posted August 16, 2021 4 minutes ago, ClipperFan said: Vladimir, if it helps, I can do sketches of Glory's Figurehead at the 1 1/4" scale you need. Another modeler, first name Doris works with material called 'plasticine' which she sculpts into incredibly lifelike figures that she uses to populate her vessels made of card. One of her latest creations is "Royal Caroline." Doris is a true artisan.......her sculptures are indescribably magnificent. She does use a heat curing clay like material. Truly wonderful. Hey Vlad..one other thing I noticed on your bowsprit. I believe you said you are going to rebuilt it...well, I suggest you correct the sprit CAP. It is not vertical as some caps are. If you look at the pic of Glory at pier side, during her conversion....draw several lines out from the main mast toward the sprit cap. Make those lines the same length...then draw a line vertical down at their edges(Just a grid). You will see that the sprit cap is NOT vertical but leans back and is actually at a right angle to the sprit and jibboom. Some photos give the illusion it is vertical. I noticed this when you made the original bowsprit, but failed to mention it. Sorry. Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
ClipperFan Posted August 16, 2021 Share #206 Posted August 16, 2021 7 minutes ago, rwiederrich said: Doris is a true artisan.......her sculptures are indescribably magnificent. She does use a heat curing clay like material. Truly wonderful. Hey Vlad..one other thing I noticed on your bowsprit. I believe you said you are going to rebuilt it...well, I suggest you correct the sprit CAP. It is not vertical as some caps are. If you look at the pic of Glory at pier side, during her conversion....draw several lines out from the main mast toward the sprit cap. Make those lines the same length...then draw a line vertical down at their edges(Just a grid). You will see that the sprit cap is NOT vertical but leans back and is actually at a right angle to the sprit and jibboom. Some photos give the illusion it is vertical. I noticed this when you made the original bowsprit, but failed to mention it. Sorry. Rob Vlad, not to 'pile on' but Rob is right. All iron bands and sprit cap are at 90 degrees to the bowsprit and jibboom. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 16, 2021 Author Share #207 Posted August 16, 2021 55 minutes ago, rwiederrich said: Doris is a true artisan.......her sculptures are indescribably magnificent. She does use a heat curing clay like material. Truly wonderful. Hey Vlad..one other thing I noticed on your bowsprit. I believe you said you are going to rebuilt it...well, I suggest you correct the sprit CAP. It is not vertical as some caps are. If you look at the pic of Glory at pier side, during her conversion....draw several lines out from the main mast toward the sprit cap. Make those lines the same length...then draw a line vertical down at their edges(Just a grid). You will see that the sprit cap is NOT vertical but leans back and is actually at a right angle to the sprit and jibboom. Some photos give the illusion it is vertical. I noticed this when you made the original bowsprit, but failed to mention it. Sorry. Rob Ok Rob thanks for catch. Will Remember and return to that when polishing it. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Vladimir_Wairoa Posted August 16, 2021 Author Share #208 Posted August 16, 2021 Back to stern sheer etc. Kicked myself to that finally. ..upper molding missing but its final shape ... GrandpaPhil, Tigersteve and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
rwiederrich Posted August 16, 2021 Share #209 Posted August 16, 2021 Sweet. the wood sands so nicely and your blending is super. Great job Vlad! Rob mtaylor 1 Quote Current build: Build log: https://modelshipworld.com/topic/25382-glory-of-the-seas-medium-clipper-1869-by-rwiederrich-196 Finished build: Build log: of 1/128th Great Republic: http://modelshipworld.com/index.php/topic/13740-great-republic-by-rwiederrich-four-masted-extreme-clipper-1853/# Current build(On hold): Build log: 1/96 Donald McKay:http://modelshipworld.com/index.php?/topic/4522-donald-mckay-medium-clipper-by-rwiederrich-1855/ Completed build: http://modelshipworld.com/index.php?/gallery/album/475-196-cutty-sark-plastic/ The LORD said, "See, I have set (them) aside...with skills of all kinds, to make artistic designs for work in gold, silver, and bronze, to cut and set stones, to work in wood, and to engage in all kinds of crafts." Link to comment Share on other sites More sharing options...
ClipperFan Posted August 17, 2021 Share #210 Posted August 17, 2021 Vladimir, I hope this helps your pursuit of Glory's lovely Grecian Goddess 'Athene' figurehead. This is a 1 1/4" sketch of the Starboard view of her. mtaylor and GrandpaPhil 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.