Jim Lad Posted October 11, 2021 Share #31 Posted October 11, 2021 You've made a very nice job of those railings, Rob. Well worth the effort. John Canute 1 Quote Link to comment Share on other sites More sharing options...
rvchima Posted October 13, 2021 Author Share #32 Posted October 13, 2021 A Bunch of Photos Before Final Assembly - Hull The rope fender is by Caldercraft. I soaked it in coffee to darken the color. Now my ship smells like a Starbucks. I made the Marie Felling text using a Brother label maker, white on clear. You can see the clear if you look closely but it's not bad. The tires are by Amati. They seem small to me but at 1:32 scale they are about thee size of the tires on my Honda CRV. I held the line with a spring clamp while I tied them in place. Power steering! The ship had a small steam engine inside a cabin that will be installed at the right. It drove chains that looped around the aft deck, through a couple of "spring boxes", and to the tiller under the grating on the left. The steam engine was controlled by the ship's wheel. Mistake 1: I installed the aft grating long before the steering chains, so I had to fish the chains underneath and pin them through the grating. Mistake 2: The pulleys each comprised 3 cast pieces that I cleaned up, painted, and assembled. Then I discovered that the supplied chain didn't fit. I eventually glued the pulley wheels solid and drilled out one side to fit the chain. yvesvidal, JerryC, Old Collingwood and 2 others 3 2 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati) Link to comment Share on other sites More sharing options...
rvchima Posted October 13, 2021 Author Share #33 Posted October 13, 2021 A Bunch of Photos Before Final Assembly - Forward Cabin, Mast, and Lifeboat The instructions call for a tall mast with three lights, a yard arm for signal flags, a derrick, a lifeboat, and a searchlight on top of the bridge. There are a few old photos of the Marie Felling around. This one shows a low mast, one light (maybe?), no yard arm, no derrick, life rafts, and no searchlight. It turns out that the owner of Caldercraft wasn't too keen on scale details as long as the model looked somewhat like the real thing. I mostly went by the instructions but made some changes for practical reasons. The instructions call for the mast to extend 370 mm above the boat deck, making the model 650 mm (25.5") high. I cut the mast down about 100 mm and removed the junk on top. The model now stands 550 mm (21.5") high. I kept the derrick. It is rigged with a 5:1 pulley system for the boat but a 1:1 pulley for the boom. I wonder if you could really handle that boom with a simple pulley? The lifeboat comes as two vacuum formed halves, with nice gratings but white metal oars, oar locks, and rudder. I added wooden seats and built a wooden rudder and oars. yvesvidal, Old Collingwood, BobG and 1 other 4 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati) Link to comment Share on other sites More sharing options...
rvchima Posted October 13, 2021 Author Share #34 Posted October 13, 2021 A Bunch of Photos Before Final Assembly - Aft Cabin I didn't use the color scheme from the original Marie Felling either. Looks like I have some touch up to do on that rail! Watch out for that last step! Other build logs have noticed that the stairs in the main cabin don't reach the upper deck - the castings are about two steps short. I didn't notice until I had built the first set, and I wasn't about to build them again. The towing hooks and release levers would actually work if they were made of something stronger. The kit does not show these beams over the skylights but another photo of the actual ship does. I bent them from some thick copper rod. Landlubber Mike, Canute, Old Collingwood and 2 others 5 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati) Link to comment Share on other sites More sharing options...
rvchima Posted October 13, 2021 Author Share #35 Posted October 13, 2021 Two More Things to Build Two laminated towing beams will protect the equipment on the aft deck. lmagna, yvesvidal, Old Collingwood and 3 others 6 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati) Link to comment Share on other sites More sharing options...
yvesvidal Posted October 13, 2021 Share #36 Posted October 13, 2021 Absolutely superb and well in the Caldercraft tradition. Lovely model. Yves Old Collingwood, Canute, lmagna and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Jim Lad Posted October 13, 2021 Share #37 Posted October 13, 2021 Very nicely done, Rod. John Canute, lmagna and Old Collingwood 3 Quote Link to comment Share on other sites More sharing options...
Old Collingwood Posted October 14, 2021 Share #38 Posted October 14, 2021 Amazing work. OC. Canute and lmagna 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
rvchima Posted October 20, 2021 Author Share #39 Posted October 20, 2021 Building a Stand I built a new stand out of cherry and joined the corners with a Kreg jig. It was a little complicated clamping the ends to the rails, but it worked out OK. Parts I didn't Use Here are the parts that I didn't use. It seems like Caldercraft updates parts and leaves the old ones in the box. A nice sheet of plywood for the deck (laser cut deck included) Gratings for the aft deck (laser cut aft deck included) Lots of dowels and brass rod (I bought new brass for the railings) Several wood blocks Stanchions (I bought brass stanchions) Ladders (I built my own) Links for anchor chain (I bought a nice brass chain) Lots of other random white metal parts. Old Collingwood, BobG, yvesvidal and 1 other 4 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati) Link to comment Share on other sites More sharing options...
rvchima Posted October 23, 2021 Author Share #40 Posted October 23, 2021 Marie Felling - Complete, 285 hours, 88 days Final pictures of the Marie Felling. It was fairly easy with the GRP hull and cabins, and somewhat monotonous with all the white metal pieces. It does make up into a beautiful model though and would be great for RC if you're into that. Old Collingwood, ccoyle, Canute and 4 others 6 1 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati) Link to comment Share on other sites More sharing options...
Jim Lad Posted October 23, 2021 Share #41 Posted October 23, 2021 A very neatly constructed model, Rod. John Old Collingwood and Canute 2 Quote Link to comment Share on other sites More sharing options...
BobG Posted October 23, 2021 Share #42 Posted October 23, 2021 Absolutely beautiful, Rod. Congratulations on a very fine build! Old Collingwood and Canute 2 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
rvchima Posted October 24, 2021 Author Share #43 Posted October 24, 2021 Many thanks to the folks who looked in. I hope that this build will help someone interested in Caldercraft models in the future. Old Collingwood and Canute 2 Quote Rod Current Build - HMS Sphinx, 20 Gun Frigate from 1775 Previous Builds Bismarck, WWII German Battleship, Prinz Eugen, WWII German Heavy Cruiser (Aeronaut), U-Boat 47 (Amati), HM Bark Endeavour (Caldercraft), US Brig Syren (MS), Arno XI Ferrari Hydroplane (Amati), Osberg Viking Ship (Billings), Anteo Harbour Tug (Panart), Marie Felling Harbour Tug (Caldercraft), Arleigh-Burke guided missile destroyer (Bluejacket) Seguin, Steam Tug from 1884, Mississippi Steamboat Robert E. Lee (Amati) Link to comment Share on other sites More sharing options...
Roger Pellett Posted October 24, 2021 Share #44 Posted October 24, 2021 Very nice work, Rod. She really looks like a steel hulled ship. I particularly like the bottom paint color. Roger Old Collingwood and Canute 2 Quote Link to comment Share on other sites More sharing options...
ccoyle Posted October 24, 2021 Share #45 Posted October 24, 2021 She looks fabulous! Old Collingwood and Canute 2 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Hawker Hurricane Link to comment Share on other sites More sharing options...
CDW Posted October 24, 2021 Share #46 Posted October 24, 2021 Outstanding model! Old Collingwood and Canute 2 Quote Completed Projects: USS Fletcher 1:144 Scharnhorst 1:350 USS Independence LCS-2 1:350 1:32 J7W1 Shinden Interceptor/Fighter Fairey Swordfish Mk. II 1:48 Harbor Tug Box Scale Albatros D.V 1:32 Ala-Kart 1:25 Ferrari 250 GT California Spyder 1:24 S-100 Schnellboot 1:72 Mercury Capsule and Atlas Booster BR-52 Steam Locomotive 1:35 Triumph 3 HW Motorcycle 1:9 Scale F-16XL-2 Experimental Fighter Bomber 1:48 Rafale 1:48 F-15E Strike Eagle 1:48 Petlyakov PE-2 Soviet Dive Bomber 1:48 TBM3 Avenger 1:32 1931 Cadillac 1:25 Scammell Pioneer SV2S Heavy Breakdown Tractor 1:35 M-50 Israeli Sherman 1:35 Military Wrecker 1:32 Delahaye 135 1:24 Toyota Sard Supra GT 1:24 Enzo Ferrari 1:24 1970 Baldwin Motion Camaro 1:25 1966 Ford Galaxie 500 Stock Car 1:25 American LaFrance Eagle Fire Pumper 1:25 1940 Ford Standard Coupe 1:25 VolksWagen Dragster/Dune Buggy/Street Rod 1:25 Kawasaki Ninja H2 Carbon 1:12 Porsche GT-1 Evo 1:24 Scharnhorst 1940 1:700 IJN Akitsushima Seaplane Tender 1:700 HMS Hood 1941 1:700 Prinz Eugen 1942 1:700 Link to comment Share on other sites More sharing options...
yvesvidal Posted October 24, 2021 Share #47 Posted October 24, 2021 Rod, Another Calder Craft model taken to exquisite completion. Congratulations on this realistic tug and thank you for sharing the build with us. Yves Old Collingwood and Canute 2 Quote Link to comment Share on other sites More sharing options...
Old Collingwood Posted October 24, 2021 Share #48 Posted October 24, 2021 I agree with all the comments - you have done a lovely job on her. OC. Canute 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Landlubber Mike Posted October 25, 2021 Share #49 Posted October 25, 2021 Beautiful model! Well done! Canute and Old Collingwood 2 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 Eduard Sikorsky JRS-1 1/72 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
lmagna Posted October 25, 2021 Share #50 Posted October 25, 2021 On 10/22/2021 at 5:53 PM, rvchima said: It does make up into a beautiful model though and would be great for RC if you're into that. You did a very nice job on this kit, and yes it does make a very nice looking and reasonably powerful RC model yet is still maneuverable because of the twin screws. Bring your buddy to get it into the water though. It does weigh a bit! Old Collingwood and Canute 2 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Tugman Posted February 24, 2023 Share #51 Posted February 24, 2023 Great build, really enjoyed going over it. Quick question (and please excuse my ignorance!), how did you do the water-line so perfectly straight? Thanks Tugman Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.