Koerant Posted December 24, 2021 Share #1 Posted December 24, 2021 Ok, so I am a complete beginner. I have little to no woodworking or modeling skills. This is my first build. I purchased this model a few years ago and was eager to start. I completed it up to the first half of the planking and then stopped for some reason. I have since moved 4 times and every time moved this unfinished model with me. About two weeks ago I decided to finally put in some time to get this model done. I only recently found out about this forum so did not keep a log from the start. I am starting this log with an almost finished longboat. This is my starting point fort this log. Longboat is ready for staining and varnish. I learned that I should not be trusted with wood stain. I stained quite a bit more than just the wood. My hands are still a shade of medium oak. I should probably have used a lighter color for the wood wood stain but it does not look too bad. I could not get a clean finish but I kinda like the uneven coat. It gives it more character. When staining the outside, the color started to bleed through the planking so I had to stain the inside as well. Boy was that a mission... My next task was to glue and finish the shields that will be added to the sides. I did not like the way the shields looked after following the instructions, so I worked on them a little bit. I sanded down the blocky look of the planks glued on them. I wanted to stain them as well, but the only color I had was the medium oak that I stained the hull with. I did not think it would look great and I was too lazy to go to the store to get another color so I left them the way they were. I want to add a bit of contrast. Next up, I need to assemble the oars. Will do that in the next couple of days. Cathead, Keith Black, Hartron and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Keith Black Posted December 24, 2021 Share #2 Posted December 24, 2021 (edited) Allan, the model looks great, the staining is a bit uneven but as you said, it adds character. Edited December 24, 2021 by Keith Black Quote Current Builds: Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: Early Swift 1805 Model Restoration Link to comment Share on other sites More sharing options...
Cathead Posted December 24, 2021 Share #3 Posted December 24, 2021 It's a nice job for a first build, something you'll be proud to display. Thanks for starting the log and it'll be fun to see how you finish! Keith Black 1 Quote Eric Current builds: scratchbuilt Missouri River steamboat Peerless (1893); 1:1 scale timber-framed outdoor kitchen Nautical builds (kits): USS Cairo; NRG capstan project; NRG half-hull; Viking longship; US revenue cutter; 18th century longboat; Bounty launch Missouri River craft (scratchbuilt): 1853 Missouri River steamboat Arabia; 1865 steamboat Bertrand; Lewis & Clark barge; keelboat; 1876 steamboat Far West Link to comment Share on other sites More sharing options...
Koerant Posted January 1, 2022 Author Share #4 Posted January 1, 2022 Oars are assembled now. I also started work on getting the sail up: I had two missing dowel sticks in my kit so had to get some at the local hardware store. A little disappointed about that. Added the shields and barrels. I am basically done. All that is needed is to figure out how I am going to match the paddle color to the shaft. Easiest might be to just paint it all the same. Either way I do not have the correct colors to do that now so will hopefully get that next week and finish this one off. Cathead, Peanut6, Ian_Grant and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Koerant Posted January 23, 2022 Author Share #5 Posted January 23, 2022 I finally made some time to finish the boat. Now all I need is to find a spot where I can admire it. Louie da fly, Peanut6, Keith Black and 12 others 15 Quote Link to comment Share on other sites More sharing options...
Louie da fly Posted January 23, 2022 Share #6 Posted January 23, 2022 Well done, sir! Steven Keith Black 1 Quote It's not really a ship model unless you've bled on it. CURRENT BUILDS Venetian merchant Ship from Basilica of San Marco Golden City - Ballarat paddlewheeler FINISHED Australian couta boat RMS Titanic HMVS Cerberus 11th century Byzantine dromon Winchelsea Nef - Late 13th century Mediaeval ship Henry Grace a Dieu - Rebuild of 1:200 model I started in 1967 https://modelshipworld.com/topic/36379-mistydeefer-by-louie-da-fly-finished-restoration-decor-yacht/#comment-1040663 Mistydeefer - restoration of decor model yacht Link to comment Share on other sites More sharing options...
Keith Black Posted January 23, 2022 Share #7 Posted January 23, 2022 Allan, the model turned out really great, congratulations. Now that the first one's done, what one is next? Quote Current Builds: Wood Hull Screw Frigate USS Tennessee Decorative Carrack Warship Restoration, the Amelia Completed: Early Swift 1805 Model Restoration Link to comment Share on other sites More sharing options...
Cathead Posted January 23, 2022 Share #8 Posted January 23, 2022 Congratulations! You'll enjoy looking at that once you find the right space. Keith Black 1 Quote Eric Current builds: scratchbuilt Missouri River steamboat Peerless (1893); 1:1 scale timber-framed outdoor kitchen Nautical builds (kits): USS Cairo; NRG capstan project; NRG half-hull; Viking longship; US revenue cutter; 18th century longboat; Bounty launch Missouri River craft (scratchbuilt): 1853 Missouri River steamboat Arabia; 1865 steamboat Bertrand; Lewis & Clark barge; keelboat; 1876 steamboat Far West Link to comment Share on other sites More sharing options...
ccoyle Posted January 23, 2022 Share #9 Posted January 23, 2022 Congratulations! She looks great! Keith Black 1 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, Hawker Hurricane Link to comment Share on other sites More sharing options...
Koerant Posted January 24, 2022 Author Share #10 Posted January 24, 2022 Thanks for the great feedback everyone. Next I am going to try my hand at something bigger. The San Francisco II from Artesania Latina. If everything goes according to plan, I can start a new build log this coming weekend. Keith Black and Cathead 2 Quote Link to comment Share on other sites More sharing options...
GrandpaPhil Posted May 22, 2022 Share #11 Posted May 22, 2022 Congratulations! Well done! Keith Black and Knocklouder 2 Quote Building: 1:64 HMS Revenge (Victory Models plans) 1:64 Cat Esther (17th Century Dutch Merchant Ships) On the building slip: 1:72 French Ironclad Magenta (original shipyard plans) On hold: 1:98 Mantua HMS Victory (kit bash), 1:96 Shipyard HMS Mercury Favorite finished builds: 1:60 Sampang Good Fortune (Amati plans), 1:200 Orel Ironclad Solferino, 1:72 Schooner Hannah (Hahn plans), 1:72 Privateer Prince de Neufchatel (Chapelle plans), Model Shipways Sultana, Heller La Reale, Encore USS Olympia Goal: Become better than I was yesterday "The hardest part is deciding to try." - me Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.