dragzz Posted September 5, 2013 Share #1 Posted September 5, 2013 this is my frist wood kit i know its a bit much for me but my dad got it for my brithday so here i go . i will need lots of help with this one . so far what i did is dry fit the keel nothing is glued yet .but in the pic u will see looks like to me that the keel is warped or is it just my bad eyes Quote Link to comment Share on other sites More sharing options...
Adrieke Posted September 6, 2013 Share #2 Posted September 6, 2013 hello dragzz try putting the keel on a flat surface and see if there is any warping now the way the bulkheads fit in you should be able correct it easily Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 6, 2013 Author Share #3 Posted September 6, 2013 will do that i and see how it looks Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 6, 2013 Author Share #4 Posted September 6, 2013 just check the keel for warp and glad its not warped so now iam going to glue the keel in place Adrieke 1 Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 6, 2013 Author Share #5 Posted September 6, 2013 o now i have the keel glued in place and there is no warping so far that i see that all good all i got to do is put the frames and knightheads in there place i will update when frames are in place BassicBill 1 Quote Link to comment Share on other sites More sharing options...
barthslb Posted September 6, 2013 Share #6 Posted September 6, 2013 Hi Dragzz - I'm in the middle of building one of these myself, been working on it sporadically for the past 6 months. It's not a particularly difficult build, but there are some challenges to it. Instructions are pretty sparse, but pictures in the manual are good. Just take it one step at a time and have fun with it. dragzz 1 Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 6, 2013 Author Share #7 Posted September 6, 2013 hello barth one thing i know for sure there great poeple here to help me if i needit and iv got all the time in the world i cant work now more so this is the next best thing lol iam going to take my time Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 6, 2013 Author Share #8 Posted September 6, 2013 ok now what i have done is glued the frames is there place but did not get the knightheads in place yet will do that some time today but so far its going really nice so far just 1 step at a time iam doing hope u like it so far if u see something i have did wrong ples let me know thy all Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 6, 2013 Author Share #9 Posted September 6, 2013 opps i just saw that i forgot to glue the last frame lol going to get that one in place berfor i do kightheads Quote Link to comment Share on other sites More sharing options...
BassicBill Posted September 6, 2013 Share #10 Posted September 6, 2013 Darn, I thought that I posted here earlier. Nonetheless...great to see you working on a project, dragzz. That is a lovely paddlewheeler! I tried to build it many, many years ago but failed miserably. I can see that you will have better success than I did. Enjoy the journey! Bill Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 6, 2013 Author Share #11 Posted September 6, 2013 tys bassic iam haveing so fun building it so far update real soon Quote Link to comment Share on other sites More sharing options...
BassicBill Posted September 6, 2013 Share #12 Posted September 6, 2013 One step at a time, buddy. Quote Link to comment Share on other sites More sharing options...
barthslb Posted September 6, 2013 Share #13 Posted September 6, 2013 Looking good! Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 7, 2013 Author Share #14 Posted September 7, 2013 going to need some help here the nighthead for the upper stern is not going right at all in the pic u will whats going on i just did a fry fit and there a fair size gap cant move it any more not to sure what to do here cant some help out ple Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 7, 2013 Author Share #15 Posted September 7, 2013 looks like i got the upper stern night head fixed what a pain in the u know what lol it was warped so what i did used some water on it and watched a video on overbending it and it fixed it here what it looks like now Quote Link to comment Share on other sites More sharing options...
BassicBill Posted September 7, 2013 Share #16 Posted September 7, 2013 Meeti g the challenges - good on you! This isn't just a matter of sticking pieces together while following instructions. Are you having fun yet? Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 7, 2013 Author Share #17 Posted September 7, 2013 o ya its a blast i still got my hair on my head so iam doing good for now lol Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 7, 2013 Author Share #18 Posted September 7, 2013 here now u can see i have the knightheads in place now next step to sand the knightheads to put the deck on to hope all goes well BassicBill 1 Quote Link to comment Share on other sites More sharing options...
robert1965 Posted September 8, 2013 Share #19 Posted September 8, 2013 Hello Dragzz, This is a nice schip, i have started today with the build of King of Mississippi. Success with the construction of your schip. Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 8, 2013 Author Share #20 Posted September 8, 2013 hello rob so u are doing the same one as me is the kits an al kit just make sure u check for warped parts rembers check 2 times glue once thats what iv been doing good luck to u Quote Link to comment Share on other sites More sharing options...
Adrieke Posted September 8, 2013 Share #21 Posted September 8, 2013 going well dragzz i actualy didnt put in thos 2 reinforcements at the bow as i filled the whole front with a piece of balsa to make it easier Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 8, 2013 Author Share #22 Posted September 8, 2013 adr did not know that u can do that i just thot go by what the book says iam still leaning tys i wil rember that for next time Adrieke 1 Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 8, 2013 Author Share #23 Posted September 8, 2013 so now u can see that i have sanded upper stren and the front knight heads for the next step this model is a lot of work but u know at the end of it i will be so proud of what ia have done that what i like BassicBill and Adrieke 2 Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 9, 2013 Author Share #24 Posted September 9, 2013 now i have both sides just about done thay time to dry then on to the next step fun fun its looking real good so far Adrieke 1 Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 12, 2013 Author Share #25 Posted September 12, 2013 starting on deck planking this part going real slow never thot it go this slow lol slow is the best way to go here a pic Quote Link to comment Share on other sites More sharing options...
popeye the sailor Posted September 12, 2013 Share #26 Posted September 12, 2013 looking very nice Dragzz...planking is going to look nice when you get it finished. I usually work it from the center....out. this way the gaps can be better kept in check. did you used to subscribe to plastic models plus? Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 12, 2013 Author Share #27 Posted September 12, 2013 i was thinking of starting from the center dont know y i did not this my frist wood kit for me and no i did not subscribe to plastic models plus popeye the sailor 1 Quote Link to comment Share on other sites More sharing options...
robert1965 Posted September 12, 2013 Share #28 Posted September 12, 2013 Hello Dragzz, I did it this way, you may well connect the wood in this way. Quote Link to comment Share on other sites More sharing options...
Adrieke Posted September 12, 2013 Share #29 Posted September 12, 2013 drawing lines on the deck wil also help you keep it all straight because it is very easy to wander if you ar enot careful . ask me how i know Quote Link to comment Share on other sites More sharing options...
dragzz Posted September 12, 2013 Author Share #30 Posted September 12, 2013 i did draw line one right down the center then doing lines as i go so i dont wander off left or right popeye the sailor and Adrieke 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.