bocdan Posted November 7, 2013 Share #61 Posted November 7, 2013 very very nice. Quote Link to comment Share on other sites More sharing options...
Jeff-E Posted November 8, 2013 Share #62 Posted November 8, 2013 Hi Anthony, She is coming along well The shot locker and pump house look very nice in situ and the test joints you made are very neat and precise Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
AntonyUK Posted November 10, 2013 Author Share #63 Posted November 10, 2013 Hello Shipmates. Finished making the main beams for the Orlop Deck. The beams were made up by laminating 2mm thick pieces of timber and assembled on the plan which is curved for the camber. Close up of the joint (not yet cleaned up ) And before anyone with a sharp eye spots it I am building the Deck upside down. (It’s my method) Regards Antony. mtaylor, egkb, janos and 1 other 4 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
harvey1847 Posted November 11, 2013 Share #64 Posted November 11, 2013 Really nice Antony! Can you explain us a little bit more your method for "curve" the beam? To make the camber. Thanks in advance, Daniel. Quote In the shipyard: HMS Triton 1773. POF. 1:48. Daniel On the computer: R.A. Principe de La Paz. POF. 1:48. Daniel Link to comment Share on other sites More sharing options...
AntonyUK Posted November 12, 2013 Author Share #65 Posted November 12, 2013 Hello Daniel. I had a old piece of kitchen work surface which had MDF on the bottom. I turned this over to show the MDF which I can drive screws into. Then I have a sheet of Poleycarbonate 10mm thick. This is pulled into the camber by putting the correct packaging at the edges and using countersunk screws to pull the centre down. Plans can be held in place tith the edge packing. As each deck has a different camber all I need to do is reduce or increase the edge packing for less or more camber. And of course if you lammanate timber it will hold its shape with little or no spring back. I hope this is the information you wanted Regards Antony. harvey1847, Erebus and Terror and egkb 3 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
AntonyUK Posted November 15, 2013 Author Share #66 Posted November 15, 2013 Hello Shipmates. Another update. The photos says it all Not yet finished yet Now have the thin Deck timbers to add. View fron the top. Close up. This is a view from the underside. The Wires are for the LED lighting. The last set on the Orlop Deck. Regards Antony fnkershner, Elmer Cornish, Erebus and Terror and 11 others 14 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
Jeff-E Posted November 16, 2013 Share #67 Posted November 16, 2013 Hi Antony, Excellent work on your Orlop Deck Frame all of your joints look very neat Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
AntonyUK Posted November 17, 2013 Author Share #68 Posted November 17, 2013 Hello Shipmates. Thanks for your kind words Jeff Another few photos with the Orlop deck fitted into its position. Not yet glued as I have the top surface to sand and clean up. Approx 5mm to trim off the pump house. Temporary spacer plank to mark the amount I need to remove from pump house height. View looking down onto deck. Thanks for looking in Regards Antony. yvesvidal, bhermann, SailorGreg and 15 others 18 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
mtaylor Posted November 18, 2013 Share #69 Posted November 18, 2013 Nice work just doesn't do this justice. Great work, either. I'm headed to the Thesaurus.... fnkershner and WackoWolf 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
fnkershner Posted November 18, 2013 Share #70 Posted November 18, 2013 I'm with Mark. Have to come up with new words. Quote Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me! Link to comment Share on other sites More sharing options...
michael mott Posted November 18, 2013 Share #71 Posted November 18, 2013 Antony, very clean joinery and the overall effect shows. Very nice to follow along. Michael Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
AntonyUK Posted November 20, 2013 Author Share #72 Posted November 20, 2013 Hello shipmates. Thank you for your kind words Mark, Floyd and Michael. Starting to plank the Orlop deck But I have a question.. For the victory buffs. Are the decks in the Orlop deck removable ??. The drawings in both books look as if they are and any photographs I have found do not show any treenails. Also the planks are short and held in position by the deck beams. Also have turned the 36 pounders out of Acetel / Delrin. Will cast enough for the cross section when I get the casting kit. Thanks for looking in. Regards Antony. Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
guraus Posted November 20, 2013 Share #73 Posted November 20, 2013 Hello Antony, As far as I know they were removable in the part of the ship you are building. The planks were short and let down in the beams except on the sides where the carpenter walk is. Alexandru Quote For all my builds please visit my site at: http://www.AlexShipModels.com Previous builds HMS Victory Machine a curer les ports La Jacinthe Japanese Fune Link to comment Share on other sites More sharing options...
Stockholm tar Posted November 20, 2013 Share #74 Posted November 20, 2013 (edited) Starting to plank the Orlop deck But I have a question.. For the victory buffs. Are the decks in the Orlop deck removable ??. The drawings in both books look as if they are and any photographs I have found do not show any treenails. Also the planks are short and held in position by the deck beams. Anthony, Yes, you're right, the central section has removable boards, to make it easier to get to the stores anywhere below in the hold. The forward and after sections both have decked platforms, for various cabins and storerooms. As Alexandru implies, the the orlop was surrounded by the carpenter's walk, a passageway to enable the carpenter and his mates access to plug any leaks on the waterline during battle. Btw, you're making a splendid job on your cross section. Edited November 21, 2013 by Stockholm tar egkb 1 Quote Kester Current builds: Sherbourne (Caldercraft) scale – 1/64th; Statsraad Lehmkuhl (half model) 1/8th" – 1'. Victory Bow Section (Panart/Mantua) scale – 1/78th (on hold). Previous build: Bluenose ll (Billings) scale – 1/100th. Link to comment Share on other sites More sharing options...
AntonyUK Posted November 20, 2013 Author Share #75 Posted November 20, 2013 Hello Alexandru and Kester. Thanks for the feed back. That's was my thinking. Thanks again Antony. Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
WackoWolf Posted November 20, 2013 Share #76 Posted November 20, 2013 Your woodworking skills are excellent. The joinery is Beautiful. This is some outstanding work by all means. Please keep the pictures coming, I have been enjoying this from the beginning. Quote Wacko Joe Go MSW :) Link to comment Share on other sites More sharing options...
AntonyUK Posted November 24, 2013 Author Share #77 Posted November 24, 2013 Hello Shipmates. Thanks for your comments... Na .. I just make things look good . Another update :- Filling in all the planking on the Orlop deck at the moment and built the enclosure on the Orlop deck. Not yet cleaned up to remove the dust and lose fibers. Not sure that the walls are ventilated but they look nice. Door is built up with planks and the lock is a bolt through. No idea what’s on the real one The plank's are rounded as they are removable. The row at the back are as yet not stained or fixed. Need to stain before fixing. Three rows done. Progress is good and the Grating is made. But not cut to size yet. First row of the Planking. That’s it for Now. Thanks for looking in Regards Antony. egkb, Stockholm tar, garyshipwright and 7 others 10 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
rafine Posted November 24, 2013 Share #78 Posted November 24, 2013 Lovely work, Antony. Bob Quote Current builds on MSW: HMS Winchelsea 1:48: Medway Longboat 1:24 Prior builds on MSW: Schooner Halifax: Lumberyard 1/48 semi-scratch; Cutter Cheerful 1:48; Granado: Caldercraft 1:64; Frigate Essex: Kitbashed Model Shipways kit; Triton Cross Section 1:48; Kingfisher from Lauckstreet kit; Syren: Model shipways kit ;Kitbashed Fair American: Model Shipways;Prince de Neufchatel: Model shipways 1:64 Civil War Picket Boat Link to comment Share on other sites More sharing options...
Rustyj Posted November 24, 2013 Share #79 Posted November 24, 2013 Very nice Antony. I admire your abiltity to build the deck off the model. Great workmanship. Quote Rusty "So Long For Now" Current Builds: Speedwell Completed Build Logs: HMS Winchelsea 1/48 Duchess of Kingston USF Confederacy , US Brig Syren , Triton Cross Section , Bomb Vessel Cross Section, Cutter Cheerful, Queen Anne Barge, Medway Longboat Completed Build Gallery: Brig Syren , 1870 Mississippi Riverboat , 1949 Chris-Craft 19' Runabout Link to comment Share on other sites More sharing options...
AntonyUK Posted November 25, 2013 Author Share #80 Posted November 25, 2013 Hello Shipmates. Thanks Rusty and Bob for you comments. Orlop is now complete and ready for final adjustments before fixing into place in the void. Gratings and planks that adjoin the Headers are not glued as they will be cut to fit after fixing the deck. View from top. Another angle of the Deck. A different angle. View of the underside of the Orlop deck. Another angle From the other side. That’s it for now. Will take a few photos when deck is fixed into place. Regards Antony. Kevin, mij, Charley54 and 10 others 13 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
Stockholm tar Posted November 25, 2013 Share #81 Posted November 25, 2013 Anthony, Absolutely beautiful workmanship! This is going to be one tremendous cross section. Quote Kester Current builds: Sherbourne (Caldercraft) scale – 1/64th; Statsraad Lehmkuhl (half model) 1/8th" – 1'. Victory Bow Section (Panart/Mantua) scale – 1/78th (on hold). Previous build: Bluenose ll (Billings) scale – 1/100th. Link to comment Share on other sites More sharing options...
fnkershner Posted November 26, 2013 Share #82 Posted November 26, 2013 Are you as excited as I am to see the deck installed? Quote Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me! Link to comment Share on other sites More sharing options...
AntonyUK Posted November 26, 2013 Author Share #83 Posted November 26, 2013 Hi Floyd. Would not call it excited ... Relief that it fits perfectly would be my statement. Yes Kester this is growing into one very big cross section. Regards Antony. Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
Paddy Posted November 26, 2013 Share #84 Posted November 26, 2013 Antony, Your craftsmanship is outstanding. Beautiful work! Quote 1st Year Apprentice :mellow: A new member of the NRG as of 8/28/13 Work in Progress - Triton 28 Gun Frigate Cross Section Link to comment Share on other sites More sharing options...
AntonyUK Posted November 26, 2013 Author Share #85 Posted November 26, 2013 Hello Shipmates. Thanks Paddy. I have to say your Cross section is one of the reasons I went into the cross section building. The Orlop Deck is now in place Very happy with the fit and the look. The deck planks on the Top Right look as if they are not stained... Yes they are The Housing and the Sail store walls are not fixed as they will need to be cut to size. Now I can start to Cut the timber for the bulwark of the Orlop deck. And so the Lower gun deck starts next week. Thanks for looking in. Regards Antony. fnkershner, rafine, egkb and 7 others 10 Quote Best advice ever given to me."If you don't know ..Just ask. Completed Mayflower Completed Fun build Tail boat Tailboat Completed Build Chinese Junk Chinese Pirate Junk Completed scratch built Korean Turtle ship 1/32 Turtle ship Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia On hold. Bounty Occre 1/45 Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section Completed H.M.S. Victory X section by Coral. HMS Victory cross section Completed The Black Pearl fun build Black Queen Completed A large scale Victory cross section 1/36 Victory Cross Section Link to comment Share on other sites More sharing options...
mtaylor Posted November 27, 2013 Share #86 Posted November 27, 2013 Anthony, Well done on the orlop. It boggles mind that you build the deck off ship. AntonyUK 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
WackoWolf Posted November 27, 2013 Share #87 Posted November 27, 2013 You have show like others that by takeing your time and always checking before glueing pays off. You detail work is outstanding. Keep the post and pictures coming, I am always watching. AntonyUK 1 Quote Wacko Joe Go MSW :) Link to comment Share on other sites More sharing options...
ajromano Posted November 29, 2013 Share #88 Posted November 29, 2013 Impressive! Quote Tony Savannah, Georgia Multi hobby nut. Link to comment Share on other sites More sharing options...
michael mott Posted November 29, 2013 Share #89 Posted November 29, 2013 Antony your skill and workmanship are exemplary. Michael Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
Jeff-E Posted November 29, 2013 Share #90 Posted November 29, 2013 Hi Antony, You have made some wonderful progress since i last looked in, the orlop deck turned out really well and looks fantastic in place. Superb work Quote Cheers Jeff Current Builds; HMS Supply Completed Builds; AL Swift 1805; Colonial Sloop Norfolk; HMS Victory Bow Section; HM Schooner Pickle Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.