Jump to content

Rattlesnake by Kenneth Powell - FINISHED - Model Shipways - American Privateer


Recommended Posts

I started a log with a few photos of my build on this site before the great crash - then my own computer crashed and I lost some photos myself. I've been building so I decided to take the time (we can't wait until we have enough) to start the log again. Reading the logs and responses on this site and seeing the museum quality work, I know the kind words and encouragement you all give. I also know any criticisms or suggestions is entirely for the best. So I post this log to give and receive as much help as possible.

 

These are some of the original pics. My gosh this kit has some fragile parts!

post-309-0-71723100-1379717121_thumb.jpgpost-309-0-70490400-1379717242_thumb.jpgpost-309-0-87924800-1379717337_thumb.jpg

 

Now some of the gun port framing.

post-309-0-19115500-1379717564_thumb.jpg

post-309-0-05237900-1379717621_thumb.jpgpost-309-0-90488700-1379717724_thumb.jpgpost-309-0-03979600-1379717937_thumb.jpg

 

Ship's boat. I shifted to this to get up the nerve to start planking. Plus that, it just looked fun. This is a small 'bread and butter kit' inside the Rattlesnake kit. The instructions give a hint to glue all the layers together using the stem guides except the last one, that will make sanding the inside easier. I say stack them together, mark the lines and sand as much as you can separately, then glue them together. It's a very small space

post-309-0-70547900-1379718471_thumb.jpg

Sorry blurry. Stapler holding down the layerspost-309-0-47768500-1379718363_thumb.jpgpost-309-0-07526200-1379718615_thumb.jpg

Link to comment
Share on other sites

On to planking:

I decided to go above the wale first. I wanted to shore-up the fragile areas of the bulkheads and the deck beams. Too many got broken!  :(

Above the wale went straight with no trimming except at the gun ports. The planking plans in the instructions lay out where to start below the wale and how many bulkheads to cover. It worked out well and gave 2 planks between seams on every run. WOW I actually followed directions and it worked!

post-309-0-93289900-1379724093_thumb.jpg repair broken deck beam

post-309-0-58021000-1379724458_thumb.jpgpost-309-0-99356700-1379724527_thumb.jpg

post-309-0-46500700-1379724634_thumb.jpgI did add a wider section of plank here. I got worried, but the number of runs did work out.

post-309-0-96266400-1379724784_thumb.jpg

Now from the garboard up

Punch Plankspost-309-0-44714900-1379725001_thumb.jpg

 

This section took longer of course with tedious sanding and placing and correcting and replacing and checking and .......

Anyway, The length of planks the kit calls for made this run easier because they are short enough to work with yet cover a good distance.

 

The kit doesn't have a cabin bulkhead and the instructions don't tell when to build it. I used the plans and made my own using a piece of juniper. The timing of this piece came from watching the scratch build by Pasi.

post-309-0-53641900-1379725155_thumb.jpg

Edited by Kenneth Powell
Link to comment
Share on other sites

Kenneth:

Good work. Your planking looks like it went pretty well. Looking forward to some more pics.

 

Russ

Link to comment
Share on other sites

Ahoy Kenneth :D

 

Great build, thanks for sharing  

 

Looking forward to following your progress.

 On with the Show.... B) 

 

  J.Pett

 

“If you're going through hell, keep going” (Winston Churchill)

 

Current build:  MS Rattlesnake (MS2028)

http://modelshipworld.com/index.php?/topic/45-model-shipways-rattlesnake-ms2028-scale-164th/

 

Side Build: HMS Victory: Corel

http://modelshipworld.com/index.php?/topic/3709-hms-victory-by-jpett-corel-198/?p=104762

 

On the back burner:  1949 Chris Craft Racer: Dumas

http://modelshipworld.com/index.php?/topic/939-1949-chris-craft-racer-by-jpett-dumas-kit-no-1702/

 

Sometime, but not sure when: Frigate Berlin: Corel

http://www.corel-srl.it/pdf/berlin.pdf

 

 

 

 

 

 
 

 

Link to comment
Share on other sites

Thanks Russ for loking in and the kind words

This is the photo of the cabin bulkhead

post-309-0-49772000-1379726485_thumb.jpgsorry blurry

Time for sandingpost-309-0-80376200-1379727153_thumb.jpg

and more sandingpost-309-0-85538000-1379727252_thumb.jpg

Notice the broken deck beams in the photos above. They just popped right off. I would glue them on with Titebond and move on.

More photos after the weekend. Carry on good people.

Link to comment
Share on other sites

Great build. Would love to hear more/see more of the cabin bulkhead and the fraiming at the bow. Did you omitt the oar ports ?

Eric

 

Current build(s) ;

AL San Francisco II

http://modelshipworld.com/index.php?/topic/862-san-francisco-2-by-eric-al-190-sport29652/

 

MS Rattlesnake

http://modelshipworld.com/index.php?/topic/868-rattlesnake-by-eric-model-shipways-164-sport29652/page-2

 

Sitting on the shelf : MS Constitution, MS Sultana,

 

Wish List : MS Essex, Confederacy, and Syren, and a Victory kit by someone ?

 

"80% of the time it works every time."

Link to comment
Share on other sites

  • 3 weeks later...

And now for some Color:

post-309-0-43543300-1381638371_thumb.jpg

post-309-0-00584700-1381638435_thumb.jpg

post-309-0-15857600-1381638683_thumb.jpg

post-309-0-37233200-1381638540_thumb.jpg

post-309-0-54946700-1381638766_thumb.jpg

Now you guys can see what I've been up to lately (besides admiring all the builds on this site). I went into this project wanting to paint her. The models finished with stain and varnish look great, but this is what I wanted. I didn't use much filler on the hull because it is a wooden model of a wooden ship and I wanted the run of planks and end seams and other 'beauty marks' to show. I measured the water line at stem and stern from the plans and marked it with a neat marking tool my wife bought me from model expo. The trick was to keep my small level steady across the rails during the whole marking process.

I painted on primer then a few coats of each color with very light sanding between coats. Then of course back and forth with the touch-ups. The gray interior may look a little different from other models, but the instructions called for it. Let me know what you think. I will take a few more photos of different views and post them very soon.

Sport - I hope these photos of the cabin bulkhead are OK.

Link to comment
Share on other sites

Ken, thanks for that pic. Would love to see more of your transom and if it's not to much to ask, the top rail(s) where they meet at the quarter deck and forecastle. I am a little hesitant to attach my transom. The metal carving does not match up and I have tweaked it. Did you sand down the wood portion to fit the metal carving ? Or did you just leave the transom oversized ?

 

Your build looks great. I'll be calling on you for help.

Eric

 

Current build(s) ;

AL San Francisco II

http://modelshipworld.com/index.php?/topic/862-san-francisco-2-by-eric-al-190-sport29652/

 

MS Rattlesnake

http://modelshipworld.com/index.php?/topic/868-rattlesnake-by-eric-model-shipways-164-sport29652/page-2

 

Sitting on the shelf : MS Constitution, MS Sultana,

 

Wish List : MS Essex, Confederacy, and Syren, and a Victory kit by someone ?

 

"80% of the time it works every time."

Link to comment
Share on other sites

Kenneth:

The outboard colors look very good. I would go with red ochre for the inboard works. That would period appropriate.

 

Russ

Link to comment
Share on other sites

Thanks guys for looking in. 

Sport - If I remember correctly, the wood transom and metal carving were close in size. The metal is very soft and I bent it a little to match the wooden transom. Once I glued them together I only had to sand a little for a real good match. The metal used in the kit also sands as easily as the wood which makes gives an almost seamless result. We should have good sunlight tomorrow so I will work on those photos.

 

Russ - I thought about red in the beginning and now may go to it.

 

Kenneth

Link to comment
Share on other sites

Okay, Now for Red

Russ, I took your advice and I like it better than the gray.

Sport, I hope these photos help. My camera is not the best.

post-309-0-24557800-1381878913_thumb.jpg

post-309-0-16027600-1381878987_thumb.jpg

post-309-0-47431900-1381879047_thumb.jpg The metal and wooden transom together

post-309-0-94478800-1381879154_thumb.jpg As close as I could get without getting blurry

post-309-0-02448200-1381879294_thumb.jpg

post-309-0-53327400-1381879402_thumb.jpg

I also built a stand. I used a nice piece of cypress and finished with clear varnish. I plan to add felt strips once it completely dries.

post-309-0-12609600-1381879629_thumb.jpg

post-309-0-91283700-1381879976_thumb.jpg

 

Link to comment
Share on other sites

Ahoy Kenneth :D

 

Looks really nice. Thanks for posting

 On with the Show.... B) 

 

  J.Pett

 

“If you're going through hell, keep going” (Winston Churchill)

 

Current build:  MS Rattlesnake (MS2028)

http://modelshipworld.com/index.php?/topic/45-model-shipways-rattlesnake-ms2028-scale-164th/

 

Side Build: HMS Victory: Corel

http://modelshipworld.com/index.php?/topic/3709-hms-victory-by-jpett-corel-198/?p=104762

 

On the back burner:  1949 Chris Craft Racer: Dumas

http://modelshipworld.com/index.php?/topic/939-1949-chris-craft-racer-by-jpett-dumas-kit-no-1702/

 

Sometime, but not sure when: Frigate Berlin: Corel

http://www.corel-srl.it/pdf/berlin.pdf

 

 

 

 

 

 
 

 

Link to comment
Share on other sites

Kenneth:

The red looks very good. I also like the cypress stand. Very nice touch with some local flavor.

 

Russ

Link to comment
Share on other sites

Ken, that's perfect ! I was going to paint my inner bulkheads grey as the instructions state, but that red looks great, and from what I've seen other state it's historically accurate. Gotta wonder why Grey vs red what the though process was when painting a ship back then. Was it easier to get a certain color ? And hence that's what color you ship was or was their more thought put into it ? Anyways sorry to ramble keep up the great work ken

Eric

 

Current build(s) ;

AL San Francisco II

http://modelshipworld.com/index.php?/topic/862-san-francisco-2-by-eric-al-190-sport29652/

 

MS Rattlesnake

http://modelshipworld.com/index.php?/topic/868-rattlesnake-by-eric-model-shipways-164-sport29652/page-2

 

Sitting on the shelf : MS Constitution, MS Sultana,

 

Wish List : MS Essex, Confederacy, and Syren, and a Victory kit by someone ?

 

"80% of the time it works every time."

Link to comment
Share on other sites

Red ochre was typically available back then and fairly inexpensive. It was used a lot in ships of that period, particularly for inboard works.

 

Russ

Link to comment
Share on other sites

Ken,

Your Rattlesnake is looking good, Nice look the blue in the windows.  I feel your pain on the deck beams, I lost mine the first week, finally got tired off fixing them and removed them until I was ready to cut my own.  have a look at my  Rattlesnake by Mog, we might be able to compare notes, any and all advise is always welcome, the members have helped me thru several tough spots.   I have taken a slightly different path to the original look of the ship , besides my rule of very little paint, I  tossed all precast bits into the bin and attempted to build my own . Again I like what you’re doing with the build.

Current Build:   Not a ship 

           

 

Completed Builds:   Mississippi River Boat OcCre 1:80

                                Bluenose, Model Shipways 1:48

                                Rattlesnake, Model Shipways 1:64

                                     Dumas # 1233  PT Boat,  Wood, 1:30 

                                 1914-1918 US Army Mule drawn Ambulance 1:16 

 

 

 

Link to comment
Share on other sites

Hi Kenneth -- I've just now found your log and enjoyed catching up with your great build.  I like the paint job, and didn't even mind the grey that much, though the red does fit with history. 

 

It's always good to have another Rattler around!

 

I also have to admire your work bench -- is that butcher block your own production?  I'm envious.

 

Cheers,

 

Martin

Current Build:  HMS FLY 1776

 

Previous Builds:  Rattlesnake 1781

                        Prince de Neufchatel

Link to comment
Share on other sites

Thanks everyone for stopping by. 

Martin - The work bench is actually a chunk of an old bowling alley. I went on business travel for a few days and my wife and her friend tore out my old bench and gave me a full garage make over. Really nice but I couldn't find anything for 2 weeks!

 

Mog - The blue in the windows was easy; painted a sheet of paper, cut to fit and placed cellophane cut to fit over it and behind the cut-outs. I think I will stay with most of the precast items from the kit, but will not use the anchors as supplied. I am going to visit your log right now.

 

Next up: guns and decking.

 

Thanks - Kenneth

Link to comment
Share on other sites

  • 4 months later...

I had no idea I hadn't posted anything for so long! Been busy with every other thing under the sun. I did accomplish some decking. I could take some time on some evenings and do a pair or 2 of deck planks treating each one like its own model. Isn't that our motto?

Before trimming and sanding

post-309-0-46828500-1394330948_thumb.jpg

post-309-0-66428700-1394331001_thumb.jpg

post-309-0-25671000-1394331055_thumb.jpg

post-309-0-46743400-1394331107_thumb.jpg

After trimming and sanding

post-309-0-59769700-1394331418_thumb.jpg

post-309-0-29179100-1394331560_thumb.jpg

Say Hello to my little sanding tool

post-309-0-22728200-1394331701_thumb.jpg

post-309-0-73099500-1394331754_thumb.jpg

Link to comment
Share on other sites

Kenneth:

Your sanding tool looks like it has been very effective. Nice work on the quarter deck planking.

 

Russ

Link to comment
Share on other sites

Interesting intrupretaton of the decking there.  Must have been tough getting those planks in the center sanded so they tapper so uniformaly.  Or are my eyes playing games on me with the photo?  I like that sanding tool, think I'll call it a sanding boot.  May make one myself when I get to this step.  How did you keep the sand paper on the wood base?

Link to comment
Share on other sites

Thanks guys for looking in.

Russ - The sanding tool worked quite well. It's actually a piece of the stand I was making that broke off so I trimmed it and glued a flat bottom. It has a good shape for the job.

Scott - I used a very thin layer of wood glue to attach the sand paper. I hope it peels off the 'boot' without much trouble. The decking is very narrow. The plans call for a taper but my measurements must have been a little off.

Next up is the main deck.

Link to comment
Share on other sites

Hi Kenneth --- Glad to see you're still at work on the Rattlesnake.  Your planking looks nice and smooth, obviously from that sanding boot.  Maybe you should get a patent!

 

Cheers,

Martin

Current Build:  HMS FLY 1776

 

Previous Builds:  Rattlesnake 1781

                        Prince de Neufchatel

Link to comment
Share on other sites

  • 4 months later...

It has been a long time since my last post but this time I have a good excuse; triple by-pass surgery with a patch. My Adrimal, the best admiral in the history of admirals, told me not to go to work but to the doctor. Like any of us men, I went to work, said all I need is rest. She then got my brother to call me at work to convince me to go to the doctor. The rest is a down hill adventure with 5 days in the hospital and 8 weeks home from work. I did manage to read 4 Patrick O'Brian novels. My Admiral was there the whole time and has never left my side. I wouldn't be here without her. Last week I felt good enough to cut deck planks and sand them to size. There was a time I couldn't even stand long enough or use my arms and chest enough to do anything.

I cut a pad from 1/16 sheet wood to mount the foward guns to cut back on the tight planking. It will be under the foward deck and no one will see it.

So here are some photos. we do need a better camera:

post-309-0-58280500-1406404614_thumb.jpg 

post-309-0-68180800-1406404695_thumb.jpg

post-309-0-56567100-1406404851_thumb.jpg

I bought extra guns from Model Expo. I know she probably didn't carry 20 but I thought 'What the heck' and I know there is not enough room for crew to move around. I added 1/16 strip instead if wheels to get a better glue joint.

post-309-0-65599900-1406404889_thumb.jpg

post-309-0-49264300-1406404933_thumb.jpg

post-309-0-66683600-1406404976_thumb.jpg

A few photos didn't upload so I'll have to adjust and finish later.

Comments are very welcome.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...