Jump to content
James H

What else do you model, besides ships?

Recommended Posts

Whilst I'm on the edge of working on my Caldercraft Mary Rose kit, I've been modelling some projects in plastic.

 

I'm also a contributor for the Military Illustrated Modeller magazine, and my latest project, a 1:32 Bachem Ba 349 Natter (Fly Model) is on the cover of the latest aircraft issue.

 

MIM_031_OFC.jpg

 

Blatant plug? Perhaps, but what else do you model apart from ship models?

Share this post


Link to post
Share on other sites

Careful, I could start something here and say lingerie :P

But seriously looking into building some Harley models.....

 

What brand of kit?

 

Modelling lingerie. I know what you mean ;) For me though, that's only on a Saturday night  :D

Share this post


Link to post
Share on other sites

Have just started the Model Airways Sopwith Camel. Have a couple Occre Locomotives in inventory as well as the Confederacy and the Marseille. Used to do a lot of plastic.....tanks, ships, cars....all the usual 60's model kits.

Finished my Wells Fargo Stagecoach and Lackawanna while waiting for our new house remodel to be completed.....still waiting to get my work space back......

Share this post


Link to post
Share on other sites

I have two and a half walls of my modelling base covered with aircraft - mainly WWII but some more modern stuff f-15 through to F-18, etc

Share this post


Link to post
Share on other sites

Congrats James! Thats cool to be featured on a magazine cover.  I also model military aircraft and armor.

Share this post


Link to post
Share on other sites

James,

 

That's a great model! Where did you get info on the Natter? Did you get plans too?

 

I spent most of my youth building plastic airplanes, ships and armor. When I moved out here, I did airplanes and cars. Then wooden ships, and it went downhill from there. . .

 

Now, for unbuilt models (along with 15 or so wooden ship models) Ive got 3 old Airfix kits, one Hasegawa Formula 3000 race car, a couple of odd WW2 planes from a hobby shop closeout, a Guillows Ryan (Spirit of St. Louis) and a Guillows B-17-that sucker is huge!

 

And, I hope, I have 20-30 years of retirement to build them.

 

Thanks James. Another fun topic.

 

Harvey

Share this post


Link to post
Share on other sites

At the present, I'm only interested in older wooden sailing ships, older than 1800, but in my life I have modeled almost everything, cars, airplanes, helicopters, space stuff, human/humanoid figures, cannons, guns and pistols in 1/1 scale, ships like the Missouri and Yamato,  as well as several plastic sailing ships.

I guess when you have the modelling gene inside you, there is little you can do to ignore it. 

Share this post


Link to post
Share on other sites

What brand of kit?

 

Modelling lingerie. I know what you mean ;) For me though, that's only on a Saturday night  :D

 

I have been looking at the Lincoln Mint kits, I like the looks of them, but pricey so on the back burner atm

Share this post


Link to post
Share on other sites

Scroll sawing wooden clocks that keep time which I sell.  

I am finishing up a plan for a windmill (polder molen) from the 1600's. It will be a working model (1.20mtr high), with inner gears and lights  People tell me once it is finished it should be in the front yard.  Maybe if I anchor it in the ground.  I can just see it disappear. 

 

Marc

Share this post


Link to post
Share on other sites

I have been looking at the Lincoln Mint kits, I like the looks of them, but pricey so on the back burner atm

Shaz, Revell has some decent hardtail chopper kits in 1:12 scale for very reasonable prices--

 

http://www.squadron.com/1-12-Revell-USA-RM-Kustom-Crusader-Custom-Chopper-p/rm7314.htm

 

There are also the Academy series with more stock/bagger options in 1/10 scale--

 

http://www.ebay.com/clp/academy-motorcycle-models-kits/2591?query=Brand%3AAcademy

Share this post


Link to post
Share on other sites

Capnharv,did you know that Paul Allen has a real Natter at his museum at Paine field. It the heritage Flight Collection.Its a great showing of mostly flyable WWIII planes, not including the Natter. BILL

Share this post


Link to post
Share on other sites

I built the MS Wright Flyer (a great Kit very interesting build) which is now happily flying circles above my wife's desk taking up no shelf space as i need that for the ever growing Fleet!!

But since this winter I am back on board the yacht I skipper back to a couple of F! racing cars 12th scale But i think next year i will smuggle a Long Boat on board as will have room for that.

Share this post


Link to post
Share on other sites

Wife and I have a side business at GriffWerks.com - we sell Foamie 3D airplanes.... born out of my love for R/C airplanes and flying.... we offer kits as well as ready to fly aircraft, they are easy to build and look great, especially with the awesome airbrush paint jobs that my better half does. We do a lot of ready to fly planes for our local hobby shops as well - they are a blast to fly and are durable enough to withstand a bunch of crashes... perfect for new flyers or trying out the 3D flying format.

 

Lou Griffin

post-574-0-97834100-1385238727.jpg

Share this post


Link to post
Share on other sites

I am guessing that modeling sheepskin leggings under a full moon by the light of a roaring bon fire isnt quite what the OP had in mind.... :P

 

When i was younger I modeled WWII aircraft, mostly Pacific Theater carrier based, the occasional 8thAF aircraft, even a car or two. Kind of drifted away from it as I got older and discovered the joys of being an adult - job, bills etc. Now I have wooden ships and MSW to occupy me and keep me out of trouble, more or less.

Sam

 

Share this post


Link to post
Share on other sites

I have a couple of side projects in the cupboard, awaiting time and opportunity, including:

 

A MS Sopwith Camel

An OcCre Stephenson's Rocket

 

Shortly to be joined by:

 

Leonardo da Vinci's Flying Machine

Leonardo da Vinci's Aerial Screw

Share this post


Link to post
Share on other sites

Here is a few of my plastic kits.. I gave many away or got broken in lack of regard.  The green little ute is completely kitbashed, the Sopwith is hand painted only with a brush,, Cars are hand sprayed and brushed.. they need some dusting...

 

Also heres last years model project.. Brushless rc boats.. had heaps of fun learning about Lipo's ans modern RC gear had been many years,, they really need to get out for a blast...    

 

Ollie

post-7066-0-55916700-1385252229.png

post-7066-0-01752000-1385252233_thumb.jpg

post-7066-0-27044400-1385252238_thumb.jpg

post-7066-0-15056500-1385252242_thumb.jpg

Share this post


Link to post
Share on other sites

Variously...

-Model airplanes of all sorts: plastic a long time ago, balsa rubber powered P51-D and Ford Trimotor, couple of R/C planes.

-Plastic car models a when I was much younger

-Several kites (A Wright Flyer, a Four-decker..)

-Model steam engines

-Tabletop gaming miniatures

-Casting and painting model chess set (Prince August: Richard The Lionheart vs Saladin)

Share this post


Link to post
Share on other sites

Bill,

 

My memory isn't what it used to be-you're correct, and I've seen it. :o I've only been to HFC once, but I think I saw it. I know I saw a V-1.

 

That day was a bit of a blur. It was my last day of work, and I needed to turn my badge in. But they were busy, so I had to kill an hour or so.

 

It's a great museum. I'm really glad that Allen keeps most of them flying.

 

Thanks for the reminder.

 

Harvey

Share this post


Link to post
Share on other sites

I think I posted a couple of these pics on MSW 1.0, but here they are again. I built this excellent kit about 18 years ago.

 

Hasegawa Sopwith Camel - 1:12 scale - wood, aluminium, cast metal, plastic and wire construction. All the control surfaces operate from the stick and pedals in the cockpit.

 

Sopwith Camel 002.jpg

 

Sopwith Camel 003.jpg

 

camelcpitl.jpg

 

:cheers:  Danny

Share this post


Link to post
Share on other sites

Lovely model Dan B)  B) I remember someone manufacturing a similar style kit for the fokker triplane.I am going back probably 35 years and can't remember the manufacturer.

Kind Regards Nigel

 

Nigel, that was Hasegawa again - wish I'd bought one of those as well, but they had already stopped making them at the time I bought this model and I couldn't get one :(.

 

They made a couple more in this series, but I can't recall what they were.

 

:cheers:  Danny

Share this post


Link to post
Share on other sites

Nigel, that was Hasegawa again - wish I'd bought one of those as well, but they had already stopped making them at the time I bought this model and I couldn't get one :(.

 

They made a couple more in this series, but I can't recall what they were.

 

:cheers:  Danny

 

you can still get the hasegawa fokker on ebay if you're willing to spend a small fortune. or wait until ME releases theirs, which should be soon. :)

Share this post


Link to post
Share on other sites

Marc, do you have a web page or anything where people van buy your clocks?

No I don't.  I usually sell when friends ask for one. The price depends on the wood I use.  I made one from 80% purple heart and the rest with pear and maple.  That clock I sold for $550.00.  What takes the longest time, is sanding all the teeth exact.  I have screwed up many times and when I put the clock together it runs too fast or slow.  I then take it apart and redo a wheel or two.

I have made 4 clocks so far.  They are time consuming but in the end you have something that actually works.  I started with a paper clock and it worked, it was a bit slow.

 

There is a guy in the UK that sells nice CAD drawings that I purchased and use to build his clocks. 

h**p://www.woodenclocks.co.uk/     

I also scour the scroll saw forum for that.  Lots of free plans there.

Marc

Share this post


Link to post
Share on other sites

Besides getting into ships I also have trains.  Not sure how to posts pics here though.  Don't see an obvious insert pic/jpg icon here.  Suggestions?

 

Let's see if I can follow instructions and show you engine #6 from the old Ma & Pa

 

post-8513-0-18024300-1386807165_thumb.jpg

 

post-8513-0-01650200-1386807274_thumb.jpg

Edited by scott larkins

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...