pete48 Posted May 10, 2014 Author Share #121 Posted May 10, 2014 Thank you Richard, I am Happy with the way Keel # 4 is turning out. How is the Endeavour comming along ? Best Regards, Pete Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted May 13, 2014 Author Share #122 Posted May 13, 2014 This morning I awoke and started wet sanding Keel # 3, in that process, I dropped the boat and broke off the bow of the cutwater, I decided to just round it off .once I fixed it so that it would look halfway decent, I spayed 2 coats of gloss white. next I will wet sand again and sprat 2 more coats. ( I wanted to capture the tumblehome and the transom in 2 of the photos )Here are the results The Sailor, Elmer Cornish, themadchemist and 1 other 4 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
russ Posted May 13, 2014 Share #123 Posted May 13, 2014 The transom looks great. It is very shapely. Russ pete48 1 Quote T'aint a hobby if you hurry Completed projects Cross section model by Russ 1/48 scale Biloxi schooner model restoration 1/24 scale Biloxi oyster skiff 1/24 scale Biloxi schooner 1/48 scale POB Current project Biloxi lugger Captain Roy 1/48 scale POB Link to comment Share on other sites More sharing options...
michael mott Posted May 13, 2014 Share #124 Posted May 13, 2014 Very sweet looking curves, and a smart finish. Michael pete48 1 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
pete48 Posted May 13, 2014 Author Share #125 Posted May 13, 2014 Thank you Russ and Michael, on Keel # 3, I spent alot of time fairing the hull to obtain the tumblehome, wich gave me this transom shape. I am pleased with the way this boat is turning out. I would like to end up with a high gloss finish that gives it a fiberglass look. ( I should get that look after 2 more coats ) Best Regards, Pete Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted May 16, 2014 Author Share #126 Posted May 16, 2014 Today I finally got the final coats of paint on Keel # 3 for a total of 9 including 2 coats of primer, I got that fiberglass gloss that I was hoping for, I then shaped the rudder and sprayed 2 coats of primer. I then turned my attention to Keel # 4 I first installed the winow glass . ( I use the plastic from X-Acto blade refill packages ) I then made the cabin top, the hatch rails ( I found a unique knot in the wood that I used for the inside face of the inside hatch rail ) and installed them I then took some Birch ply for the cabin face then installed some Mahogany for the drop board rails . Here are the results hexnut, themadchemist, dgbot and 3 others 6 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
dgbot Posted May 16, 2014 Share #127 Posted May 16, 2014 It is really starting to shape up. I like the form. What colors have you decided on. David B pete48 1 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/ Link to comment Share on other sites More sharing options...
pete48 Posted May 16, 2014 Author Share #128 Posted May 16, 2014 Hi David, For Keel # 4 I have not decided yet, on Keel # 3 the Cabin / Cockpit Coamings are made from a Birch plywood and I am going to use a Cherry Stain for the brightwork then a varnish , And I am going to use a sand color for the deck, I may make the fish well deck and cockpit floor a teak deck by using strips of Birch with Black paint as Caulking. Best Regards, Pete Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
dgbot Posted May 16, 2014 Share #129 Posted May 16, 2014 If my memory serves me this craft was painted the way the fisherman wanted it to identify it. There was no standard shade. David B pete48 1 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/ Link to comment Share on other sites More sharing options...
pete48 Posted May 16, 2014 Author Share #130 Posted May 16, 2014 Hi David, Thank you I try to go with what looks good Best Regards, Pete Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted May 16, 2014 Author Share #131 Posted May 16, 2014 After my morning Coffe , I unmasked Keel # 3 and took a couple of shots with Keel # 4 I wanted to show the Tumblehome and the natural curve it makes at the top of the deck. here is what it looks like Elmer Cornish, The Sailor, Aussie048 and 1 other 4 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
russ Posted May 16, 2014 Share #132 Posted May 16, 2014 They are looking great. I like how the stern meets the deck on the left hand boat. That is very classy looking. Beautiful work. Russ pete48 1 Quote T'aint a hobby if you hurry Completed projects Cross section model by Russ 1/48 scale Biloxi schooner model restoration 1/24 scale Biloxi oyster skiff 1/24 scale Biloxi schooner 1/48 scale POB Current project Biloxi lugger Captain Roy 1/48 scale POB Link to comment Share on other sites More sharing options...
dgbot Posted May 16, 2014 Share #133 Posted May 16, 2014 I like, two alike yet different. David B pete48 1 Quote Work in progress USS Maine in cardstock.http://modelshipworld.com/index.php/topic/7446-uss-maine-by-dgbot-hmv-card/#entry220003 Completed Blockade runner Teazer http://modelshipworld.com/index.php/topic/6063-blockade-runner-teazer-by-dgbot-card-stock/#entry175967 Completed The Monitor Lehigh http://modelshipworld.com/index.php/topic/6920-the-monitor-lehigh-by-dgbot-card-model/#entry203680 Completed Kingston Class MCVD http://modelshipworld.com/index.php/forum/10-kit-build-logs-in-progress/ Link to comment Share on other sites More sharing options...
pete48 Posted May 17, 2014 Author Share #134 Posted May 17, 2014 Thank you Russ and David, The Boat on the left is Keel # 3 , This is the Transom I like the best I love how the Tumblhome rolls over, And I will do this style again Best Regards, Pete Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted May 17, 2014 Author Share #135 Posted May 17, 2014 Today I decided to work on the Cockpit Floor for Keel # 4 , I first laid out the Cockpit Floor so that the Bildge could be accessed, Then figured out where the Bench would go . I then cut out strips of 1/64" Birch ply and roughed in the Pieces. Then fine tuned them Painted the edges Black ( I got a little sloppy ) and glued it up . This is the First one I have done like this . I will do the same for the Fish well Deck . I did start to cut out the bench sides and proped them up for the Photo. Here are the results hexnut, The Sailor, captainbob and 3 others 6 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
The Sailor Posted May 18, 2014 Share #136 Posted May 18, 2014 Very nice fleet. How is the Endeavour comming along ? Best Regards, Pete Well, I need a little break... pete48 1 Quote Cheers, Richard. ------------------------------Current build: Mercury, Russian brig, America's Cup Yacht Endeavour (1934), AmatiCompleted build: HM Schooner Pickle, JoTiKaNext: Link to comment Share on other sites More sharing options...
pete48 Posted May 18, 2014 Author Share #137 Posted May 18, 2014 Hi Rchard, I can understand about needing a break ( I just had one for about 4 months ) The boats are starting to come together . Thanks for the likes Best Regards, Pete Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted May 19, 2014 Author Share #138 Posted May 19, 2014 On Keel # 4 Today, I started by shaping the Mast and fitting it. I decided to add a square piece of Birch Ply as a Mast step. I then stained the Birch on the Cockpit face , Cabin entry and the companion way rails a Cherry . On the Cockpit floor I made a new Hatch cover ( I didnt like the first one ) Laid out the Deck for the cut outs ( I will do the Fish well deck the same as the Cockpit floor ) Then Painted the Cabin top a gloss white. Here are the results captainbob, The Sailor, themadchemist and 5 others 8 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
captainbob Posted May 19, 2014 Share #139 Posted May 19, 2014 I like the cockpit. They keep getting better. Bob pete48 1 Quote Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray Link to comment Share on other sites More sharing options...
pete48 Posted May 19, 2014 Author Share #140 Posted May 19, 2014 Thank you Bob, I appreciate it , I am happy with the way its turning out Best Regards, Pete Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted May 20, 2014 Author Share #141 Posted May 20, 2014 Today, I finished the Cockpit floor , first I cut out Birch ply for the bench supports and stained them cherry . Next was to cut out the Deck hatches on the fish well deck . then I cut out more birch strips for the deck . I installed the bench supports and installed the birch strips on the fish well deck .I sanded the Cabin top to get it ready for a second coat . I like how this has turned out Here are the results themadchemist, dgbot, captainbob and 4 others 7 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
michael mott Posted May 21, 2014 Share #142 Posted May 21, 2014 She is looking great. Michael pete48 1 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
pete48 Posted May 21, 2014 Author Share #143 Posted May 21, 2014 Thank you Michael, I appreciate it . Hows the Cutter comming along ? Best Regards, Pete Littlebob 1 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
michael mott Posted May 21, 2014 Share #144 Posted May 21, 2014 Pete I am working on the big boat right now so the cutter sits as inspiration within sight of the big work. Michael pete48 1 Quote Current builds Bristol Pilot Cutter 1:8; Skipjack 19 foot Launch 1:8; Herreshoff Buzzards Bay 14 1:8 Other projects Pilot Cutter 1:500 ; Maria, 1:2 Now just a memory Future model Gill Smith Catboat Pauline 1:8 Finished projects A Bassett Lowke steamship Albertic 1:100 Anything you can imagine is possible, when you put your mind to it. Link to comment Share on other sites More sharing options...
pete48 Posted May 26, 2014 Author Share #145 Posted May 26, 2014 I thought today would be a good day to work on Keel # 4 , I started by refitting the Centerboard. Then I cut out the Bowsprit Blank, marked it now its ready for shaping. I then made the inside drop board rails , and installed them. I then cut out the seat, wich I made out of 2 pieces so that the seat fits under the Deck. Next I ripped down more of the 1/32" birch ply for the decking . I then laid it out the seats in the same fashion as the cockpit floor and fish well deck. I then installed the seats and added a pre bent pre stained strip cut it to fit aft of the seat and match the cockpit coaming . Here are the results MarisStella.hr, themadchemist, russ and 1 other 4 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
russ Posted May 26, 2014 Share #146 Posted May 26, 2014 It is coming along well. Details are important on a large scale model of a small boat. Yours are looking good. One question. Are you doing the planking details on the seats off the model and then installing the seats as completed units? I ask because the caulking details are bold. If they are good for you, then no problem. If scale is an issue there, you might want to see if you can tone them down. It is your choice though. Russ pete48 1 Quote T'aint a hobby if you hurry Completed projects Cross section model by Russ 1/48 scale Biloxi schooner model restoration 1/24 scale Biloxi oyster skiff 1/24 scale Biloxi schooner 1/48 scale POB Current project Biloxi lugger Captain Roy 1/48 scale POB Link to comment Share on other sites More sharing options...
pete48 Posted May 26, 2014 Author Share #147 Posted May 26, 2014 Thank you Russ, The seats were made off the model then installed .This is the first model that I have tried this on,so scale was not that important ( it just had to look good ) I made the caulking a bit dramatic to see how it would look overall. Its all a just learning process ,and Its alot of fun. Best Regards, Pete captainbob 1 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
pete48 Posted May 26, 2014 Author Share #148 Posted May 26, 2014 Here are a few Hull shot comparison pics between Keel # 4 on the left , and Keel # 3 on the right , dgbot, Littlebob, themadchemist and 4 others 7 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
russ Posted May 26, 2014 Share #149 Posted May 26, 2014 Paint job looks really spiffy. Russ pete48 1 Quote T'aint a hobby if you hurry Completed projects Cross section model by Russ 1/48 scale Biloxi schooner model restoration 1/24 scale Biloxi oyster skiff 1/24 scale Biloxi schooner 1/48 scale POB Current project Biloxi lugger Captain Roy 1/48 scale POB Link to comment Share on other sites More sharing options...
pete48 Posted May 27, 2014 Author Share #150 Posted May 27, 2014 Thank you Russ, I am pleased with how the paint turned out, especially on Keel # 3 Best Regards, Pete Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.