Jump to content
Senior ole salt

New Bedford Whaleboat by Senior Old Salt - FINISHED - Model Shipways

Recommended Posts

I started this model about three weeks ago. So far not many problems as the book provided with the kit was very helpful. I'm ready to paint and have applied a sanding sealer. I'd like to know if acrylics are OK to use for the model.

 

Here is what it looks like so far:

 

post-9806-0-51448400-1388971499_thumb.jpg

 

Thanks for any info.

 

S.os

Share this post


Link to post
Share on other sites

Looks good so far SOS.  Built this model a couple of years ago. Great little model, lots of details. I used the paints that came with the kit.

They are acrylics. I found a book that goes into great detail regarding the whaleboat. It is titled: "The Whaleboat, a study of design, construction and use, from 1850 - 1970, by Willits D. Ansel.  There are three great museums in the area also that have original whaleboats on display: Newbedford Whaling Museum, Mystic Seaport and Nantucket Whaling Museum. All great places to go. One more book is Melvilles "Moby Dick". Melville discusses in great length The roll of the whaleboat and it's crew on a whaling ship.  Enjoy the build.

 

Scoot

Edited by Scoot

Share this post


Link to post
Share on other sites

I'm making slow progress so far and below are tow images of the ends. I found that the dowel supplied with the kit for the Loggerhead too short to work with and had to get a longer length to enable me to shape it.

( not showing in pix)

 

post-9806-0-78714900-1389393118_thumb.jpg

 

post-9806-0-84885500-1389393626_thumb.jpg

 

Thanks for viewing 

 

S.os

 

PS. I haven't applied paint yet but the parts showing above are not glued down.

Edited by Senior ole salt

Share this post


Link to post
Share on other sites

Hey there ole salt, my kit did not have the book in it, so while I waited for a new book I ordered (about a month) to come in I scratch built the crane and davit in the plans provided in the kit, it fit the whale boat perfectly. Do you have plans to build the crane for your boat also? I did not make a build log for mine, not many do. All I did was place it in the finished gallery. Anyways your boat looks excellent!!!

Share this post


Link to post
Share on other sites

Lieutenant. 

 

My kit did not contain plans for the crane but the book was most helpful. I don't intend to make a crane but will carve, steal or otherwise acquire a scaled cat stalking a rat which will also be in the finished model.

 

For me a fun way for an observer to get an idea of scale.

 

S.os

Share this post


Link to post
Share on other sites

Sos.  In the Model Shipways kit I received, there were four pages of prints. One of them showed a front and side view of the bulwark/crane/davit. There were no instructions for building it, and I had to really study the prints to see how everything was put together. Looking forward to watching your progress.

 

 

Scoot

post-310-0-70848100-1389921156_thumb.jpg

Share this post


Link to post
Share on other sites

Scoot, If you  google Models of the New Bedford whale boats, a lot of pix come up. My kit just had 4 pages of plans for the boat.I  wonder just what boat plan present day kits omit ?  My kit was scant on oar locks, so I have to make my own. I also found the wood and moulds for the line tubs are over sized and will not fit in place. So thats another item to make from scratch.

 

Good luck with your kit and if you get puzzled at times I'll be glad to chime up.

 

S.os

 

PS this site is also helpful : 

 

http://www.whalingmuseum.org/programs/beetle-whaleboat-project

 

as it shows many pix of the real thing . It's close to the plans furnished in the kit.In fact I modified some the items in the Beetle site to the model build.

Edited by Senior ole salt

Share this post


Link to post
Share on other sites

Hey there senior, the kit should have six sheets of instructions, six separate sheets or either three with instructions on both sides. If you like I can send you a complete set (no cost) , I have two complete sets which I will no longer need. The sheet with the davit/cranes has the sail measurements also and may help if you plan on showing it raised on your build. Anyway let me know I'll be glad to help.

Share this post


Link to post
Share on other sites

Up at the top of the page next to your photo is a envelope icon, click on it for the drop down menu, there it will have an option for compose new, that will take you to a new page were you can place my MSW name (greatgalleons) to recieve your message or address directly to my email address.

Share this post


Link to post
Share on other sites

This weekend, I hit the model with some paint. I was very hesitant as I wasn't sure just what scheme course to take. The thwarts are just temporary as before . I still have to make the thwart knees and rudder hardware as well as the brackets that hold on the steering oar and numerous other details just to the hull alone not mention all the gear carried aboard these unique craft. I intend to weather the model some and an attempt is made with some rust stains on the fwd.Stb. bow.

 

post-9806-0-77383900-1390227673_thumb.jpg

 

post-9806-0-07460800-1390227831_thumb.jpg

 

post-9806-0-98254400-1390227872_thumb.jpg

 

Any weathering tips would be appreciated.

 

Thanks

 

S.os

 

Share this post


Link to post
Share on other sites

That is just Beautiful S.os  

 

Thanks for posting this build

 

Eamonn

 

PS those colours really work, including the weathering!

Share this post


Link to post
Share on other sites

That looks great! I like the light blue interior in particular. I'm interested to see how you do weathering. Chalk pastels work well, and I've seen rust weathering sets for model railroads.

Share this post


Link to post
Share on other sites

For weathering you can do what is called the dry brush method but practice first.  Up at Manitowoc I have seen many a weathering job with this method.  But the biggest secret to success is less is more.

David B

Share this post


Link to post
Share on other sites

I got all the thwarts installed. I also took the liberty to depart from the plans furnished in the kit.

With the C.W. Morgan undergoing major repairs there are many independent boat builders  furnishing new whale boats for the bark. Like many boats the whale boat isn't a "cookie cutter" craft.

 

With this in mind and using one of the whale boat sites ( Beetle)a building on the internet I decided to use a different version of the steering oar brace. It looked more substantial then the one shown on the Erik Ronnberg pattern. One problem I had was the size to make it. After making two of different sizes I settled on the one shown in the images.

 

Also in the kit is no provision for a mast and spar rest after the sail gear is lowered. This U shaped chock is located on the stern just to the stb. side of the loggerhead.

 

post-9806-0-04564800-1390955148_thumb.jpg

 

post-9806-0-65073900-1390955225_thumb.jpg

 

post-9806-0-43196500-1390955294_thumb.jpg

 

post-9806-0-63498300-1390955323_thumb.jpg

 

Most of the boat itself is finished. Now all I have to do is construct , improvise and install all the various whale hunting craft. A kit in it self.

 

S.os

 

 

Share this post


Link to post
Share on other sites

Your whaleboat looks fantastic. The colors are perfect and in you last set of pictures it looks like it is sitting dockside waiting to be loaded onto the ship. I have this kit in the closet but have been afraid to start it without enough experience under my belt. I look forward to seeing the equipment being built. Your project is an inspiration.

Share this post


Link to post
Share on other sites

SoS.  Model looks fine. Boat fittings look authentic.  If I am correct, whaleboats came from the boat builder pretty much stripped. Hull may have been primed but I believe 

most fittings and paint was done to whaleship owners, and boatsteerers specs. Many variations on types of fittings.  Yours look great. Whalecraft is a lot of fun to make. Enjoying your progress.

 

Scoot 

Share this post


Link to post
Share on other sites

post-9806-0-99797300-1391485557_thumb.jpg

 

 

Been making some of the fittings. The kit supplies photo etched harpoons & lances. Also copper wire to solder them to.

 

Does anyone here know any household liquids to blacken em with ?

 

post-9806-0-81954700-1391485743_thumb.jpg

 

The oars are simpler to make. I used poplar from H. Depot.

 

post-9806-0-87491100-1391485811_thumb.jpg

 

Now the compass was furnished with the kit but not the C. rose. I hope my home made rose doesn't get the boat steerer lost.

 

Still a way to go.

 

S.os

Share this post


Link to post
Share on other sites

I like the way you did it a work of art and an inspiration.  I brought the kit with me and hope to build it.  But no painting or airbrushing my sister would not like it.

You are good.

David B

Share this post


Link to post
Share on other sites

Thanks for the encouraging words and tips.

 

Next to attend to some of the cordage involved with this model, like the harpoon lines, painter and various bucket handles. Maybe even an eye splice for the painter. I'm stretching the harpoon line just like they did in the old days.

 

post-9806-0-93315600-1391561583_thumb.jpg

 

post-9806-0-93315600-1391561583_thumb.jpg

 

Notice the fastening stains in the hull.

 

post-9806-0-14594500-1391561699_thumb.jpg

 

 

 

 

I deepened the stain in the ceiling. I thinks it looks better.

 

I might do the same for the thwarts but can't figure if the stain would be less where the rowers sat of lighter. Any thoughts ?

 

S.os

post-9806-0-75886700-1391561629_thumb.jpg

Share this post


Link to post
Share on other sites

Sos. My thought is that there certainly be seat wear on the thwarts, and foot wear and tool and rope wear etc.. On my whaleboat the goal was to make it appear that the whaleboat had survived a four year stint on a whaleship. Tried to put myself in place of the boatsmen plying their trade. Fun trying to decide the different traits of the different sailors on the different oars. Attached is a pic of a loggerhead, notched to perhaps count the whales captured on this whaleboat. Pic of a authentic whaleboat in the New Bedford Whaling Museum. Enjoy.

 

Scoot

post-310-0-51440200-1391653359_thumb.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...