Jump to content

warped spars


Vett

Recommended Posts

Depending on how much they are warped, you can sometimes straighten them with the same rigging lines.

There aren't but two options: do it FAST, or do it RIGHT.

 

Current Project Build Log: Soleil Royal in 1/72. Kit by Artesania Latina.

Last finished projectsRoyal Ship Vasa 1628; French Vessel Royal Louis 1780. 1/90 Scale by Mamoli. 120 Cannons

 

Future projects already in my stash: Panart: San Felipe 1/75; OcCre: Santísima Trinidad 1/90;

Wish List: 1/64 Amati Victory, HMS Enterprise in 1/48 by CAF models.

 

So much to build, so little time!

 

 

Link to comment
Share on other sites

The smaller ones had be heated next to an iron and formed to shape.  I tend to now, as Jud said, use them as patterns and make them out of wooden dowels.

 

The larger ones should be two-piece assemblies.  With these, you can put a small steel, or wooden rod in them and glue the halves together.  Makes sure to use a lot of clothes pins to clamp them down with.

 

Current Builds:  Revell 1:96 Thermopylae Restoration

                           Revell 1:96 Constitution COMPLETED

                           Aeropiccola HMS Endeavor IN ORDINARY

Planned Builds: Scientific Sea Witch

                            Marine Models USF Essex

                            

 

Link to comment
Share on other sites

If you split the stock for the yards from a plank - using a fro-like tool - the yards will be less likely to bend or twist - as this follows the grain - something a dowel is hit or miss with.

NRG member 45 years

 

Current:  

HMS Centurion 1732 - 60-gun 4th rate - Navall Timber framing

HMS Beagle 1831 refiit  10-gun brig with a small mizzen - Navall (ish) Timber framing

The U.S. Ex. Ex. 1838-1842
Flying Fish 1838  pilot schooner -  framed - ready for stern timbers
Porpose II  1836  brigantine/brig - framed - ready for hawse and stern timbers
Vincennes  1825  Sloop-of-War  -  timbers assembled, need shaping
Peacock  1828  Sloop-of -War  -  timbers ready for assembly
Sea Gull  1838  pilot schooner -  timbers ready for assembly
Relief  1835  ship - timbers ready for assembly

Other

Portsmouth  1843  Sloop-of-War  -  timbers ready for assembly
Le Commerce de Marseilles  1788   118 cannons - framed

La Renommee 1744 Frigate - framed - ready for hawse and stern timbers

 

Link to comment
Share on other sites

Hello, I have managed to fix such bended plastic pieces by dipping them into very hot water (actually, boiling) and setting them to the correct position with two pliers. It also may be a good idea to try the technique on a piece of sprue to set the correct temperature before doing it on the actual piece.  

 

The boiling water is hot enough to make your piece pliable yet not that hot to make it lose its correct shape. I would not try heating a plastic piece in another way; it may melt or, even worse, can ignite if heated too much. 

Edited by Doreltomin
Link to comment
Share on other sites

  • 2 months later...

Vett,

I am not sure if the boiling water technique worked or not, however, Revell has an amazing customer service that you can request replacements from. If the kit is from the US then it takes only a couple of weeks to get the replacements, otherwise, if it comes from Revell Germany, it can take up to 12 weeks. I have had to request warped, broken or missing pieces on numerous occasions and have yet to pay for them. The downside is that if the model is out of production, then they rarely if ever have the part. Hope this helps, If not now then possibly in the future.

Steve

Current Build: Merit 1/48 Early Eco 80' PT Boat and Imai 1/50 Catalan Ship

Finished:

Revell 1/196 USS Constitution (My oldest son's school project)
Revell 1/72 Hanse Kogge
Revell 1/50 Viking Ship
Revell 1/72 U-Boat
Zvezda 1/72 English Medieval Ship Thomas

Revell 1/90 The Nina

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...