CaptainSteve Posted May 1, 2015 Share #931 Posted May 1, 2015 (edited) Here's the pic of the starboard side, and onto the aft ones.... The pic is super macro from about 4" out. Looks better at galloping on horse back scale. Looks pretty darn good at 3"-from-monitor-using-super-exploded-resolution scale, as well. Nice work, Mark !! Edited May 1, 2015 by CaptainSteve IgorSky, Salty Sea Dog, GLakie and 7 others 10 Quote CaptainSteve Current Build: HM Granado Bomb Vessel (Caldercraft) My BathTub: Queen Anne Barge (Syren Ship Models) Log: Queen Anne Barge (an build log) Bounty Launch (Model Shipways) Log: Bounty Launch by CaptainSteve Apostol Felipe (OcCre) HMS Victory (Constructo) Check It Out: The Kit-Basher's Guide to The Galaxy Website: The Life & Boats of CaptainSteve Link to comment Share on other sites More sharing options...
GLakie Posted May 1, 2015 Share #932 Posted May 1, 2015 I agree with Steve! Looks just dandy to me. Nice! cog, Salty Sea Dog, Piet and 3 others 6 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
Jack12477 Posted May 1, 2015 Share #933 Posted May 1, 2015 I'll triple that (what Steve & George said) ! Nice clean fit ! CaptainSteve, popeye the sailor, IgorSky and 4 others 7 Quote Jack "No one is as smart as all of us" - Is ón cheann a thagann an cheird The craft comes from the head --------------------------------------------- Current build: US Constellation Non-ship builds: USCG UH-65A Dolphin M16 Multi-gun motor carriage diorama M4A3 Sherman Tanks dioramas 1936-1939 Mercedes Benz 540K 1934 Rolls-Royce Phantom II JSDF Light Armor Vehicle Figures: The Last Bridge: Raider Reaper Edge of Universe: Ianis The Last Bridge: Vadim with cart Completed build log(s): 18th Century Longboat , Marie Jeanne, Willie L Bennett 1888 50 ft Gaff-rigged Ice Yacht Scratch Build The Sullivans (DD 537) Liberty Ship SS John W Brown USS England (DE 635), Artesania Latina Titanic Lifeboat Gallery: Swift , Armed Virginia Sloop, Santisima Trinidad Captain's Launch , 18th Century Longboat , Marie Jeanne Other: Rhinebeck Aerodrome Tour Link to comment Share on other sites More sharing options...
Canute Posted May 1, 2015 Share #934 Posted May 1, 2015 What Jack, George and Cap'n Steve said, Mark! Tres bien in Licorne lingo. mtaylor, CaptainSteve, IgorSky and 4 others 7 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
augie Posted May 1, 2015 Share #935 Posted May 1, 2015 Looks really fine from this angle. Well done!!!!! Salty Sea Dog, Jack12477, popeye the sailor and 4 others 7 Quote Augie Current Build: US Frigate Confederacy - MS 1:64 Previous Builds : US Brig Syren (MS) - 2013 (see Completed Ship Gallery) Greek Tug Ulises (OcCre) - 2009 (see Completed Ship Gallery) Victory Cross Section (Corel) - 1988 Essex (MS) 1/8"- 1976 Cutty Sark (Revell 1:96) - 1956 Link to comment Share on other sites More sharing options...
mtaylor Posted May 1, 2015 Author Share #936 Posted May 1, 2015 Thanks guys for the comments and the likes... What Jack, George and Cap'n Steve said, Mark! Tres bien in Licorne lingo. To bad I don't speak French... Ok.. I did try. I really did. I sat down with Belle Poule (aka Pretty Chicken) and with Google Translate and Falconer's.. got close on translating it. There's still a bunch that doesn't make sense in the rigging area and that's what I need the info on. Well... ANCRE finally came out with the English version.. I ordered it last weekend and it's being shipped "expedited"... not sure if it will be faster though. Landlubber Mike, Jack12477, Piet and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
popeye the sailor Posted May 2, 2015 Share #937 Posted May 2, 2015 I like it Mark! wraps around nice and merges smoothly! good for you IgorSky, Piet, GLakie and 1 other 4 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
src Posted May 2, 2015 Share #938 Posted May 2, 2015 Mark, looks great from here. I would say that absolutely passes the macro test. I don't see any LED lighting yet...... Sam mtaylor, Piet and GLakie 3 Quote Current Build Constructo Enterprise Link to comment Share on other sites More sharing options...
pete48 Posted May 2, 2015 Share #939 Posted May 2, 2015 Nice work Mark, she's really coming along nicely Best Regards, Pete IgorSky, GLakie, Omega1234 and 1 other 4 Quote "may your sails be full of wind and the sun on your back" Current Builds : Future Builds : N.G Herreshoff 12 1/2 Scratch Build 3/4" = 1' - 0" Scale Completed Builds : Volvo 65 Farr Yacht Design Herreshoff Alerion Herreshoff Buzzards Bay 14 Volvo Open 70 Member : The Herreshoff Registry Montgomery Sailboat Owners Group Peter Kunst Sailboat Models http://www.herreshoffregistry.org/ http://www.msog.org/ http://www.facebook.com/Peter-Kunst-Sailboat-Models-1524464774524480/ Link to comment Share on other sites More sharing options...
Piet Posted May 2, 2015 Share #940 Posted May 2, 2015 Well okay, I slowed my horse down and then got off to put my nose real up close and - - - wow, that planking looks great! Cheers, IgorSky, popeye the sailor, GLakie and 5 others 8 Quote Piet, The Flying Dutchman. "Your greatest asset is not the quantity of your friends , rather the quality of your friends." (old Chinese proverb) Current Builds: Hr. Ms. Java 1925-1942 VOC Ship Surabaya Planned Builds: Young America Diorama - scale 1:3000 Future Builds: KPM ship "MS Musi." Zuiderzee Botter - scale 1:25. VOC Jacht in a 6" lamp, Buginese fishing Prauw. Hr. Ms. Java - Royal Navy Netherlands Cruiser. Completed Builds: Hr. Ms. O16 Submarine Hr. Ms. O19 - Submarine Royal Navy Netherlands Ship Yard Diorama with Topsail schooner - Friendship Sloop Gwenfra Muscongus Bay Lobster Smack Golden Hind - Cutte Sark (both not in this forum) Link to comment Share on other sites More sharing options...
gjdale Posted May 2, 2015 Share #941 Posted May 2, 2015 Looks great from this distance too Mark! mtaylor, GLakie, IgorSky and 1 other 4 Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout Link to comment Share on other sites More sharing options...
mtaylor Posted May 2, 2015 Author Share #942 Posted May 2, 2015 (edited) Thanks again for looking in, everyone. Mark, looks great from here. I would say that absolutely passes the macro test. I don't see any LED lighting yet...... Sam Don't hold your breath on the lighting on this build. It's a work in progress and I'm not making any decisions until the exterior is planked. I'm still learning my way around it. Edited May 2, 2015 by mtaylor IgorSky, Jack12477, Canute and 5 others 8 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
NenadM Posted May 2, 2015 Share #943 Posted May 2, 2015 It seems you win in fight with curvatures. Realy nice job GLakie and mtaylor 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic Link to comment Share on other sites More sharing options...
src Posted May 2, 2015 Share #944 Posted May 2, 2015 If that is learning, carry on. Sam mtaylor and GLakie 2 Quote Current Build Constructo Enterprise Link to comment Share on other sites More sharing options...
Guest Tim I. Posted May 2, 2015 Share #945 Posted May 2, 2015 Thanks guys for the comments and the likes... To bad I don't speak French... Ok.. I did try. I really did. I sat down with Belle Poule (aka Pretty Chicken) and with Google Translate and Falconer's.. got close on translating it. There's still a bunch that doesn't make sense in the rigging area and that's what I need the info on. Well... ANCRE finally came out with the English version.. I ordered it last weekend and it's being shipped "expedited"... not sure if it will be faster though. Time for me to order a copy, if they have one in English! - Tim Quote Link to comment Share on other sites More sharing options...
cog Posted May 2, 2015 Share #946 Posted May 2, 2015 Sorry Mark, No horses anymore. One to horse heaven, the other sold ... so I tried a two legged gallop by and fell flat on me face, and chew Musky ... a wounderfull planking job at an inch from me eyes. Well done. GLakie, Salty Sea Dog, mtaylor and 2 others 5 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
mtaylor Posted May 2, 2015 Author Share #947 Posted May 2, 2015 If that is learning, carry on. Sam Sam, it's definitely a learning.. a learning curve... :D Time for me to order a copy, if they have one in English! - Tim Tim... it's in English...and Italian now: http://modelshipworld.com/index.php/topic/10361-ancre-belle-poule-monograph-english-and-italian-now-available/ Sorry Mark, No horses anymore. One to horse heaven, the other sold ... so I tried a two legged gallop by and fell flat on me face, and chew Musky ... a wounderfull planking job at an inch from me eyes. Well done. Carl, should I change than then from "galloping horse scale" to "Porsche Mad Dash scale"? I don't think "Trip and Fall on Your Face Scale" would work. src, Salty Sea Dog, Canute and 4 others 7 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
mtaylor Posted May 2, 2015 Author Share #948 Posted May 2, 2015 (edited) This is one.. the "older version" heh heh.... http://zombiedrive.com/ford/2006/ford-gt.html I prefer the classice GT40 look. As for Ford.. uh-yeah.. I'm an old Chevy racer. But I've always loved the look of the GT40. There's a couple of car topics in Shore Leave so if you want, let's continue it there. Back to planking and watching glue dry.... Edited May 2, 2015 by mtaylor cog, Jack12477, GLakie and 1 other 4 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
cog Posted May 3, 2015 Share #949 Posted May 3, 2015 Mark, Done the other side jet ...? Jack12477 and GLakie 2 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
Landlubber Mike Posted May 3, 2015 Share #950 Posted May 3, 2015 Looking great Mark. Are you using a combination of ebony and stained pear? What stain or dye are you using? GLakie and mtaylor 2 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 Eduard Sikorsky JRS-1 1/72 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
mtaylor Posted May 3, 2015 Author Share #951 Posted May 3, 2015 Mark, Done the other side jet ...? Bow section.. yes. No pics yet. Working on the aft (quarterdeck) bulwarks. Looking great Mark. Are you using a combination of ebony and stained pear? What stain or dye are you using? Mike, Frames are cherry. Planking that on is Swiss pear and ebony. No stain... hopefully I won't need it. cog, Landlubber Mike, Jack12477 and 2 others 5 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Landlubber Mike Posted May 4, 2015 Share #952 Posted May 4, 2015 Wow, very impressive! Now that you've worked with ebony, are you going to stick with it on other builds? Seems like you've figured out how to make it behave. GLakie and mtaylor 2 Quote Mike Current Wooden builds: Amati/Victory Pegasus MS Charles W. Morgan Euromodel La Renommèe Plastic builds: SB2U-1 Vindicator 1/48 Five Star Yaeyama 1/700 Pit Road Asashio and Akashi 1/700 diorama Walrus 1/48 and Albatross 1/700 Special Hobby Buffalo 1/32 Eduard Sikorsky JRS-1 1/72 IJN Notoro 1/700 Akitsu Maru 1/700 Completed builds : Caldercraft Brig Badger Amati Hannah - Ship in Bottle Pit Road Hatsuzakura 1/700 Hasegawa Shimakaze 1:350 F4B-4 and P-6E 1/72 Accurate Miniatures F3F-1/F3F-2 1/48 Tamiya F4F-4 Wildcat built as FM-1 1/48 Special Hobby Buffalo 1/48 Citroen 2CV 1/24 - Airfix and Tamiya Entex Morgan 3-wheeler 1/16 Terminated build: HMS Lyme (based on Corel Unicorn) On the shelf: Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits Future potential scratch builds: HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans) Link to comment Share on other sites More sharing options...
mtaylor Posted May 4, 2015 Author Share #953 Posted May 4, 2015 Make it behave....???? I don't think that's possible. However, yes, I probably will stick with it while my stock lasts. Omega1234, cog, Landlubber Mike and 3 others 6 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
mtaylor Posted May 6, 2015 Author Share #954 Posted May 6, 2015 Update time. Starboard side aft outer bulwark is done.. sanded and has one coat of Wipe-On poly drying. I'll rotate the hul around and turn to on the port side aft. I'm debating over when this part is done whether to finish the hull planking or turn my attention to the stern planking. I guess I'll just wait and see what mood I'm in. KentM, Mike Y, IgorSky and 29 others 32 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
GLakie Posted May 6, 2015 Share #955 Posted May 6, 2015 That's some nice, tight-fitting planking Mark! Sweet! CaptainSteve, Piet and mtaylor 3 Quote GEORGE Don't be bound by the limits of what you already know, be unlimited by what you are willing to learn. Member of the Nautical Research Guild Link to comment Share on other sites More sharing options...
src Posted May 6, 2015 Share #956 Posted May 6, 2015 Mark, that looks great. Question, why the poly before the planking is finished? Sam Piet, GLakie, mtaylor and 1 other 4 Quote Current Build Constructo Enterprise Link to comment Share on other sites More sharing options...
popeye the sailor Posted May 6, 2015 Share #957 Posted May 6, 2015 planking looks awesome Mark........neat how you left a pre measured gap for the ebony in respect to your next step.......I guess it boils down as to how you want the stern planking to lay. do you want it to butt over the hull planking, or do you want the hull planking to case in the stern planking. V2 has been Very good to you GLakie, Piet, mtaylor and 5 others 8 Quote I yam wot I yam! finished builds: Billings Nordkap 476 / Billings Cux 87 / Billings Mary Ann / Billings AmericA - reissue Billings Regina - bashed into the Susan A / Andrea Gail 1:20 - semi scratch w/ Billing instructions M&M Fun Ship - semi scratch build / Gundalow - scratch build / Jeanne D'Arc - Heller Phylly C & Denny-Zen - the Lobsie twins - bashed & semi scratch dual build Billing T78 Norden in dry dock: Billing's Gothenborg 1:100 / Billing's Boulogne Etaples 1:20 Billing's Half Moon 1:40 - some scratch required Revell U.S.S. United States 1:96 - plastic/ wood modified / Academy Titanic 1:400 Trawler Syborn - semi scratch / Holiday Harbor dual build - semi scratch Link to comment Share on other sites More sharing options...
Beef Wellington Posted May 6, 2015 Share #958 Posted May 6, 2015 Mark - that planking looks great, did you spile any of the planks to get such a tight fit? Piet, mtaylor and GLakie 3 Quote Cheers, Jason "Which it will be ready when it is ready!" In the shipyard: HMS Jason (c.1794: Artois Class 38 gun frigate) Queen Anne Royal Barge (c.1700) Finished: HMS Snake (c.1797: Cruizer Class, ship rigged sloop) Link to comment Share on other sites More sharing options...
shipmodel Posted May 6, 2015 Share #959 Posted May 6, 2015 Hi Mark - Coming along quite nicely. I can see how your planking skills are improving all the time as you get more experience and work your way up the learning curve. As for sequencing, I recommend that you plank the stern first. This is how it was done in actual practice, so the run of the hull planks would overlap the hood ends of the stern planking, reducing the chance that water action would loosen the stern planks. It is also easier to do, because you can sand the ends of the stern planks flush with the final ribs, then simply run the hull planks over and past them before trimming and sanding flush with the face of the stern planks. If you have Zu Mondfeld's book, look at his discussion of stern planking (pages 96-97 in my edition). Looking forward to watching you progress. Dan . CaptainSteve, Jack12477, Landlubber Mike and 5 others 8 Quote Current build -SS Mayaguez (c.1975) scale 1/16" = 1' (1:192) by Dan Pariser Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS Oneida, Swan 42 racing yacht, Queen Anne's Revenge (1710), SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914), James B Colgate (1892), POW bone model (circa 1800) restoration Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas "Take big bites. Moderation is for monks." Robert A. Heinlein Link to comment Share on other sites More sharing options...
captainbob Posted May 6, 2015 Share #960 Posted May 6, 2015 Mark, I don't say much, but I want you to know, you're doing a fine job Bob Jack12477, mtaylor, cog and 3 others 6 Quote Every build is a learning experience. Current build: SS_ Mariefred Completed builds: US Coast Guard Pequot Friendship-sloop, Schooner Lettie-G.-Howard, Spray, Grand-Banks-dory, a gaff rigged yawl, HOGA (YT-146), Int'l Dragon Class II, Two Edwardian Launches In the Gallery: Catboat, International-Dragon-Class, Spray Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.