Jump to content

Recommended Posts

Hello My name is Alexander. 
I apologize in advance if it is not clear. I do not speak in English and translated by a computer. 
Decided to share their work. Here I will try to show your thread. Do thread recently, so far the results are not very many. But the thread very much. Now work has a couple of figures. So soon there will be still other figures. I hope with time I will continue to show what I will appear. 
 
I'll start with figures that make for your model. Female figure on HMS Druid in 1776. 
First, the final result: 
post-9820-0-49595400-1391168311_thumb.jpg
post-9820-0-05835300-1391168376_thumb.jpg
post-9820-0-07981200-1391168406_thumb.jpg
post-9820-0-15238400-1391168439_thumb.jpg
 

 

 

 

 

 

 

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

Show how everything was done gradually 

Draft Thread

post-9820-0-68483600-1391170097_thumb.jpg

post-9820-0-91843100-1391170114_thumb.jpg

moving eventually worked out the details. First rough and about

post-9820-0-93679000-1391170175_thumb.jpg

post-9820-0-79391300-1391170306_thumb.jpg

post-9820-0-60087800-1391170336_thumb.jpg

post-9820-0-15947200-1391170434_thumb.jpg

moving eventually worked out the details. First rough and about
later in more detail. Neponravilis folds of the dress , so was their remodel
post-9820-0-25792900-1391170669_thumb.jpg
post-9820-0-56713000-1391170688_thumb.jpg
post-9820-0-57706300-1391170717_thumb.jpg
post-9820-0-45946700-1391170760_thumb.jpg

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

Hi.

WoW amazing stuff.

Excellent carvings.

 

Regards Antony.

Best advice ever given to me."If you don't know ..Just ask.

Completed Mayflower

Completed Fun build Tail boat Tailboat

Completed Build Chinese Junk Chinese Pirate Junk

Completed scratch built Korean Turtle ship 1/32 Turtle ship

Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia

On hold. Bounty Occre 1/45

Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section

Completed H.M.S. Victory X section by Coral. HMS Victory cross section

Completed The Black Pearl fun build Black Queen

Completed A large scale Victory cross section 1/36 Victory Cross Section

Link to comment
Share on other sites

Babushka maia russkaia. Mi gavarim pa russki domoi ^^

Link to comment
Share on other sites

Nice work Alexander!

Casey

 

"I drank what?" - Socrates

 

Current Builds:  

                                  

Finished Builds: 

 

Future Builds:        

  • Mamoli Golden Hind
  • Mamoli Black Prince
  • AL Swift
     

 

Link to comment
Share on other sites

Babushka maia russkaia. Mi gavarim pa russki domoi ^^

How interesting.

PEREDAVAITE BABUSHKE BOLSHOI PRIVET!

 

P.S.To be clear, I will explain all 

Vivian praised me in Russian, and my question is how she knows the language said that her grandmother and Russian at home they speak in Russian. 
I handed her grandmother hello.
 
I hope that the computer is turned clear.
Edited by korablik1979

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

Very,very nice piece of carving Alexander!!

 

Kind Regards Nigel

Thank you, Nigel for your appreciation and good wishes. 
 
I want to thank everyone for the warm welcome. It is very nice!

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

Very nice carving, Alexander!

What material are you using and which oil?

Janos

Hi Janos 
Thank you very much. 
This figure rose from  pink pears. 
covered with tung oil, like this 
post-9820-0-10907000-1391255401_thumb.jpg
Tinted bituminous varnish.
post-9820-0-84284200-1391255483.jpg
Its better to be diluted with turpentine or mineral spirits 
P.S. Recover! I wish you good health!

 

Edited by korablik1979

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

This sculpture cut and light wood. 

Here's what happened: 

post-9820-0-70482300-1391255954_thumb.jpg

post-9820-0-23860200-1391255977_thumb.jpg

post-9820-0-17039000-1391255988_thumb.jpg

post-9820-0-08799100-1391256010_thumb.jpg

 

This apple tree. 

Likely to put the dark figure of a model, but just have not decided yet. 

This turned out not so gentle in proportion as basketball, and breasts are too large 

This has not yet toned anything because it is easy to spoil everything

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

This is still my last job. I finished it a few days ago. 

Here's a French lion   turned out.

post-9820-0-19463900-1391433309_thumb.jpg

post-9820-0-12721000-1391433329_thumb.jpg

post-9820-0-99036600-1391433345_thumb.jpg

post-9820-0-81732000-1391433360_thumb.jpg

post-9820-0-81888800-1391433389_thumb.jpg

If interested, and in that sense, I can show pictures during operation.

 

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

Very nice work indeed, you have some excellent sculpting skills Alexander, especially at this scale.

 

cheers

 

Pat

If at first you do not suceed, try, and then try again!
Current build: HMCSS Victoria (Scratch)

Next build: HMAS Vampire (3D printed resin, scratch 1:350)

Built:          Battle Station (Scratch) and HM Bark Endeavour 1768 (kit 1:64)

Link to comment
Share on other sites

Home. 

You can see that for simplicity I glued the paper with the drawing on the workpiece. The first thing to do for landing slot

post-9820-0-61822700-1391502275_thumb.jpg

post-9820-0-35244100-1391502296_thumb.jpg

 

Then I switched on the machine circular saw, so faster

post-9820-0-65873600-1391502340_thumb.jpg

post-9820-0-37731300-1391502498_thumb.jpg

post-9820-0-24997300-1391502520_thumb.jpg

 

The following picture shows that this thread I had a second. The first attempt was a little different, and the customer has not approved it.

post-9820-0-28680500-1391502705_thumb.jpg

 

PS To be continued.

sorry, have to run for job

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

continuation 
 
post-9820-0-45540900-1391536460_thumb.jpg
Unfortunately, when there was work on the head of a lion I ran out of batteries in the camera, so more photos with a ready thread head.
You can see that part of the excess from the last attempt is cut and inserted into the groove on the blank bar. Now until the end of the thread it will be on it.
post-9820-0-58700700-1391536575_thumb.jpg
If you look closely, you can see that the color of the wood has changed a bit , especially on the head figurines
This is because of the oil , and which is impregnated with a lion's head . I put a brush oil on the thread. Tung oil is absorbed quickly and makes the tree a little different . Now it is pricked as before and is very convenient for carving even the smallest elements. Now you know a little secret.

post-9820-0-69675000-1391537050_thumb.jpg

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

Alex, exquisite carving, thank you for sharing.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Now is the time to work on a shield with lilies . First I 'll show pictures, and then open another little secret.
 
So the lion looked at the beginning of work on the shield
post-9820-0-87008800-1391537343_thumb.jpg
So after
post-9820-0-01140800-1391537365_thumb.jpg
post-9820-0-45255500-1391537382_thumb.jpg
So in fact what happened in the end is not quite what is photographed at the beginning . The shield with lilies actually different. Note that in the first picture , this part is not as convex  as in the end.
I did not succeed. I was frustrated. I cut below and try again. Again bad. So shield became quite flat and on it was impossible to fix. What to do? Redo it all over again? This is so offensively . I decided to try to fix everything. But first, another blank tree I began to cut again inside with lilies. I liked it, now you need to carefully move it to the figure. 
 
That's why I made the first shot. And the line is not there by accident and not for beauty. With her help I was able to print this part of the correct scale on cardboard. Then tried to cut the exact shape, and what was inside the wreath. It was laborious, it was necessary to try a lot. Several times had to start anew. And finally, everything worked, I cut out cardboard replica of what I wanted. 
 
I now had a pattern. I have attached it to a new piece with lilies and transferred all nyuansy.Ostalos all neatly cut and paste the new piece into place. So the whole figure was saved. 

 

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

Came the turn of the hind paws

post-9820-0-21642600-1391540210_thumb.jpg

Now crown

post-9820-0-36171700-1391540295_thumb.jpg

post-9820-0-06066100-1391540309_thumb.jpg

post-9820-0-77943500-1391540325_thumb.jpg

post-9820-0-69986100-1391540811_thumb.jpg

post-9820-0-66686900-1391540831_thumb.jpg

cut small parts separately

post-9820-0-61600000-1391540883_thumb.jpg

post-9820-0-68462700-1391540907_thumb.jpg

post-9820-0-05006400-1391540936_thumb.jpg

and the last item

post-9820-0-44878000-1391541003_thumb.jpg

post-9820-0-23660400-1391541025_thumb.jpg

post-9820-0-32180300-1391541047_thumb.jpg

post-9820-0-39656500-1391541068_thumb.jpg

well that's all. in the end I want to open another one of my secret. Photographing process work is also very useful. Often you can see that just not visible. Pictures help to see their mistakes. When working, don't remember how it looked figurine of a week ago. And if you suddenly have to start all over again (this happens), then you can better understand where to make changes and do not make a mistake опять.У photos have another benefit. When it was all over and the thread goes to the customer on the memory remains of those pictures.

 

 

Sincerely, Alexander
Commissioned carved work
Samples of my work: Carving from Belgorod

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...