Jump to content

HMS Victory by guraus - scale 1:48 plank on frames


Recommended Posts

Alexandru, these look great and a lot better than you could have achieved with the silver solder "blob" method. Bravo! Regarding Karl's comment about the decks, on Royal Navy ships, weather permitting, the decks were holystoned every day with salt water and this was what gave them their light colour. This was as much for hygiene (600-800 men living in cramped conditions) as a way to keep some of the men occupied. Although the decks were generally oak for strength and resistance to bouncing guns the convention over the years for models has been to represent them in holy.

Bob

Link to comment
Share on other sites

Hello Alexandru.

Skilled at wood... Skilled at metal.. And the list grows everytime I read your log.

Excellent build with so much detail being as standard :)

 

Regards Antony.

Best advice ever given to me."If you don't know ..Just ask.

Completed Mayflower

Completed Fun build Tail boat Tailboat

Completed Build Chinese Junk Chinese Pirate Junk

Completed scratch built Korean Turtle ship 1/32 Turtle ship

Completed Santa Lucia Sicilian Cargo Boat 1/30 scale Santa Lucia

On hold. Bounty Occre 1/45

Completed HMS Victory by DeAgostini modelspace. DeAgostini Victory Cross Section

Completed H.M.S. Victory X section by Coral. HMS Victory cross section

Completed The Black Pearl fun build Black Queen

Completed A large scale Victory cross section 1/36 Victory Cross Section

Link to comment
Share on other sites

Thanks Bob, Antony and Jeronimo for following my build.

 

Here is another small update.

 

Regards, Alexandru

post-540-0-60387200-1393120187_thumb.jpg

post-540-0-78615800-1393120191_thumb.jpg

post-540-0-87911200-1393120196_thumb.jpg

post-540-0-39741700-1393120201_thumb.jpg

post-540-0-93995200-1393120204_thumb.jpg

post-540-0-15872200-1393120209_thumb.jpg

post-540-0-68936500-1393120214_thumb.jpg

For all my builds please visit my site at: http://www.AlexShipModels.com

 

Previous builds

 

Link to comment
Share on other sites

Nicely done, Alexandru.  I like how you got the steering ropes set up with that tricky X piece. 

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Lovely work Alexandru.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Alexandru,

 

Superb work. Your build is at the top of this art-form Congratulations, it must be very satisfying. It certainly is a joy to follow along

 

Michael

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

  • 2 weeks later...

Beautiful work Alexandru. A work of art...

I do have a question though - and I may show my lack of knowledge here a bit... The anchor cable in the pic above is engaged to the capstan but I thought the cable was hauled by means of a messenger cable attached to the anchor cable. Food for thought. :)

Link to comment
Share on other sites

Thank you Bob.

 

Dave,

 

You are right about the messenger being engaged on the capstan then the anchor cable attached to it. I did exactly the same on my model but maybe is not obvious from the pictures I posted.

 

In the first picture below you can see the anchor cable belayed to the riding bit (the thicker one and a bit darker in color) and the messenger passing next to it (the thinner, white one). Same messenger is coming back in the bottom of the picture. In the second picture you see the messenger (white one) engaged on the capstan. In the third picture (an older one) you can see the whole arrangement: anchor cable going down through the corner of the main hatch on the orlop deck where is coiled as you can see in the forth picture (an even older one), while messenger go around the capstan.

 

Regards,

Alexandru

post-540-0-19405000-1394464381_thumb.jpg

post-540-0-10450400-1394464540_thumb.jpg

post-540-0-63569500-1394464750_thumb.jpg

post-540-0-75185200-1394465098_thumb.jpg

Edited by guraus

For all my builds please visit my site at: http://www.AlexShipModels.com

 

Previous builds

 

Link to comment
Share on other sites

Thank you all again.

 

Here is another small update as I continue with the middle deck framing.

 

Regards,

Alexandru

post-540-0-08986500-1395528925_thumb.jpg

post-540-0-85694200-1395528925_thumb.jpg

post-540-0-51448200-1395528926_thumb.jpg

post-540-0-54559600-1395528927_thumb.jpg

post-540-0-10010100-1395528929_thumb.jpg

post-540-0-57032000-1395528930_thumb.jpg

post-540-0-95685300-1395528931_thumb.jpg

post-540-0-38141900-1395528933_thumb.jpg

post-540-0-51907800-1395528934_thumb.jpg

post-540-0-76878000-1395528935_thumb.jpg

For all my builds please visit my site at: http://www.AlexShipModels.com

 

Previous builds

 

Link to comment
Share on other sites

Link to comment
Share on other sites

  • 3 weeks later...

Thank you Monello for pointing that out.

I was not aware of it but you are right: almost all pictures on pages 16 to 18 seem to be lost. I wonder if that happen to other build logs too. Didn't see any note from admins informing us about any loss of data so maybe they don't know either. Could someone share some light on this issue?

 

Thank you,

Alexandru

For all my builds please visit my site at: http://www.AlexShipModels.com

 

Previous builds

 

Link to comment
Share on other sites

Alexandru,

 

There was a Hard Drive crash during server maintenance.  It took out some of the mirror also.  Here's the link": http://modelshipworld.com/index.php?/topic/6021-server-maintenance-scheduled/     The Admins have changed the array for Hard Drives to prevent this in the future.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

  • 3 weeks later...

Well, it took me a while but I think I posted back all the missing pictures with only several exceptions - for some reason I can't find them on my computer but there's only about 5 that are missing.

 

Regards,
Alexandru

For all my builds please visit my site at: http://www.AlexShipModels.com

 

Previous builds

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...