Jump to content

Recommended Posts

Hi @ all!


I would like to present here my ongoing project. It is the Mayflower from 1620 after the plans of 

Waldemar Nowy (Danzig, Poland) 1975: "Historic Sailship MAYFLOWER" (based on the Mayflower II)


I started this build about in November 2010. I had several breaks during the build due to my private situation. At the moment I work on the cannons and the masts. Here are some pictures of my progress so far. I would also like to post some of my techniques I used as soon as time allows me to.









Edited by RdK

Share this post

Link to post
Share on other sites

There are enough Mayflower builders here you could start a Mayflowergroup, nice pictures of your build.


I had my best fish soup ever at the train station in Helsinki

Edited by the learner

Share this post

Link to post
Share on other sites

Hello everyone,


my sincere apologies for being absent for so many years, but my work/studies did not allow me to enjoy ship modelling and other of my hobbies.


I only managed to make the masts ready at some point in 2015. The masts are made from wood, whereas the ship is made from card and paper. I use oil paints (my other hobby I did not have time for during the last decade) to color the wooden looking parts of the ship and the masts. The idea in this model is to make it look 'used' or 'in action' and not like the clean and beautiful museum pieces (which I really adore much!).


On two of the pictures you can see how I tried to make the masts a bit darker (more dirty) around the woolding. And the other shows the 'altering' of the planks, which are made from a self-adhesive foil with wood pattern.


Having finally a bit more time this autumn I plan to continue on the Mayflower by doing the dead eyes and rope for the standing rigging. Here are another two pictures of how tall the ship actually is, and in which state of the build.


I hope to be able to post more soon and also explain a bit my techniques for making such a card model.









Share this post

Link to post
Share on other sites

Very nice work, Radek.


I used to have the book "The Voyage of the Mayflower II". Very enjoyable, but got lost sometime during one of my housemovings. A pity; I used to re-read it every so often. The 1957 reconstruction and voyage are a saga in their own right.


You'r doing a very good job of her.



Share this post

Link to post
Share on other sites

Hello everyone,


I was able to continue on the Mayflower and almost finished the standing rigging. One interesting detail that is not in the plans are the catharpins. Now I know my model is not very accurate as it comes to history, but I tried to do cathharpins that are from about that era and found the answer in R.C. Anderson's book about seventeenth century rigging.


Last time I rigged a ship model (except my Elbing Cog in 2010) was as a teenager in the last millennium. Hence my rigging is very clumsy; especially the ratlines, because I did not use a pattern mask. Here are some pictures from the progress so far and my apologies for the bad photographs, all made by my old smartphone camera. I have bought a snapshot camera today and hope to post better pictures next time.


When time allows I will also post some older pictures of the techniques I've used in this card model.













Share this post

Link to post
Share on other sites

Frames and Underwater Hull



Hi everyone!


Here's a small description of how I started the build back in 2010, some insight into my way of hull shaping.

I start with a 1mm cardboard test-frame (from frozen pizza boxes) to see where the gun ports, decks and masts will be.



Then I cut the middle frame from balsa wood (two 1.5mm plates glued together) to give the model stability, because card tends to deform and bend the whole structure.



The other frame parts (bulkheads) were cut from a 2mm cardboard (old puzzle box) and painted black using a marker where the openings from the gun ports or the gratings will allow to see the frames. The lower tiny edges of the bulkheads were hardened and strengthened with CA glue. The main gun deck was done from a 1mm card.





Next were the gun ports. For that I used 1mm card stripes that were glued to the frames with the gun ports in between. The ports itself were taped with the self adhesive foil with wooden patterns and 'altered' with black oil paint.



Then followed the 'planking' of the hull. For that I use a different approach than most modellers:


Instead of using several layers of horizontal and vertical card stripes or fillers with lots of sanding I use a bit less messy approach due to the fact that I do not have a hobby room and have to keep my work space in the apartment clean.


The next pictures show how I do the individual stripes, or rather panels, for the space between each frame, or bulkhead.








A scratch build like this involves a lot of 'trial and error' where I need to adjust few parts when the result is not as good as hoped for or mistakes are made.





Once all the 'rounded' card panels are glued onto the frame, I did not entirely get around sanding and had to sand a few places around the bulkheads to make the card smooth. Of course, the 1mm card cannot get fully rounded and shows small folds or 'wrinkles' around the edges. 




This made the card feel 'furry' so I used a water based white glue to smoothen the surface. In addition to the smoothening, the glue also hardens the card, giving it more integrity.






No other hull planking is added to the model at this stage. The following step for the hull is applying the foil with wooden pattern. But first the upper side of the ship including upper hull and decks had to be done. 


So much for now. More will follow soon.


Right now I am making the sails and running rigging.





PS: Thanks Steven and Patrick for the encouragement!

PPS: I've corrected the year of the beginning in my first post. It was 2010 and not 2011.

Edited by RdK

Share this post

Link to post
Share on other sites

Decks Planking and Capstan


Hi @ all!


The planking of deck and hull is made with the self adhesive foil with wood pattern (color: 'Pear Medium' and 'Medium Nut Tree').


For the decks I use the foil 'Pear Medium'. First the deck is transformed to a 1mm card by using a needle to outline the dimensions and the plank distances. Also, the plank pattern is drawn on the deck. I cut tiny stripes of 1.5mm, attach them on the card and alter with brown oil paint 'burnt sienna'. 






Today I would maybe use black paint for altering as it gives the deck a more greyish 'worn out' appearance. But at that time of the build I liked the more brownish color of the decks.




The darker wood parts such as the walls, doors, and the outer planking have been done with the 'Medium Nut Tree' foil and black oil paint for altering. Here are some pictures of some of the deck elements:












The irregularities in the process - which of course are the fault of the novice carpenter ;) - add a bit to the style of the early 17th century shipbuilding, which was not as precise and accurate as the later magnificent builds of the 18th century ships of the line. Gun carriages have been placed and a small box to imitate depth underneath the gratings.





The capstan has been made from balsa wood and card and painted with brown oil paints 'burned sienna' and 'burned umber'.







Next post about finishing the hull...


Share this post

Link to post
Share on other sites

Hull Planking and The Mayflower


Hi everybody!


The upper hull was made out of one single piece of 1mm card. It was first planked and prepared on the inside, then attached to the model.






The half deck was prepared and glued in place above the capstan. Also at this point I had to make sure the running rigging is attached to the cleat because later there will be no space to fiddle around the capstan.




I could have made more hanging knees underneath the half deck, but no one can look inside there anyway and I learn for the next time to do it better.


To imitate the stern windows I used the inner plastic part of a wound plaster painted slightly brownish.



While researching how to plank the ship I found this forum and some useful information regarding 'planking rules'. I also used stealer and drop planks. Now I am not sure if that was common in the early 17th century but it appeared to me as the best way to make the card model look more like a wooden one.








The plank butts are way out of proportion for this scale, but that way you can see them also from a distance when looking at the model and that is what I wanted to achieve. The hull was then altered/painted with black oil paint.




The wales have been made from 1mm thin card stripes and painted with Humbrol enamel paint for plastic models. The thicker wales were colored with the black waterproof marker.





At that point I considered a white underwater hull, but my wife convinced me that the wooden appearance of the model looks better, so I left it like it is.




The Mayflower has been done from a 2mm thick card by hardening it a bit with CA glue, then using an engraver tool, a pen, and a not so sharp knife I got once from a wooden sail ship modeler back when I was a kid. Once the flower was shaped, I hardened it again with CA glue and painted with white Humbrol enamel and oil paints (viridian, sap green, yellow ochre).








So much for now.


...to be continued...






Share this post

Link to post
Share on other sites

Keel, Beak and The Stand


Hi @ all!


Thanks Mark! 😊


The keel has been made from thick card glued together to achieve the thickness of the keel, taped with the foil and altered with black oil paint. In the front part I tried to bend the foil to make it look as if the rounded part of the keel has been made from a rounded grown tree.





The beak has been made from card and painted with the brown oil paints and the side panels with the Humbrol enamel paints. For the side panels of the beak I used also the self adhesive foil.









The stand base was purchased from a local hobby shop. Ironically it is made of a thick cardboard. The supports were made from balsa wood glued together. I used the self adhesive foil for the base, altered with black oil paint and painted the supports with the brown oil paints (burned sienna, burned umber).




I have no picture of it, but I used a 1mm wire that I glued into the keel and drilled holes into the supports in order to have a solid stand of the model.






So much for this post. More will follow soon.







Edited by RdK

Share this post

Link to post
Share on other sites

Deck Fittings and Details


Hi @ all!


For quite a time I was thinking about the gratings. Wooden ship modellers have a nice way to cut stripes and glue them perpendicularly together. However, this did not work for me with card although I have seen others doing it. Another way is to just paint the gratings on a sheet of paper. I came up with the 'hard way' to just take the scalpel and cut out the holes individually. It worked more or less... The self adhesive foil has been used for the frames and all was painted with oil paints.






The bell has been made from paper. The bell shoulder has been simulated with CA glue and the tongue with a piece of card. All painted gold with a marker and hanged with a thread that has been hardened with CA glue. I removed the cord from the bell's tongue later on as it was too long. The rails have been made from balsa wood painted white. The bell's roof was made from 1mm card and self adhesive foil with wood pattern.





Belaying pins have been made from card, a wire and a drop of glue on top. This is a typical way in card modelling to do them.



Cleats and knight heads were made from 1mm pizza card and painted with oil paints. I do not have pictures of the process, but later on I used the same method to do the blocks for the halliards. More on that in a later post.


Ladders were made from a 0.3mm thin card and the self adhesive foil taped on both sides then altered with black oil paint. The edges were painted with brown oil paints (burnt sienna and burned umber).





All black hinges were made from thin card painted black with a marker, bend over a carpet knife to simulate the hinge and using a compass to simulate the nails.




And this is the model in it's current state. Rigging is progressing slowly but steady. Since the rudder can be moved, I removed it for the rigging process because of moving the model back and forth all the time and the risk of damaging the fragile paper hinges.



More on the rudder, channels, etc. soon....




Share this post

Link to post
Share on other sites

Hi Radek


I’m a bit late in joining your Build Log, but your model is just a pure joy to look at.  Impressive, yes.  Beautiful, yes.  Nice?  Yes.  Very, very nice!





Share this post

Link to post
Share on other sites

Rudder, Channels, etc...


Hi everyone!


Thanks @ Steven and Patrick! It is nice to hear when a card model does not look like card at all. That is, I believe, the goal of any card modeller, regardless of the model, whether it depicts a metal or a wooden one. Thank you for the compliments. I wish I could make better pictures.


The rudder was copied from the plans onto 2mm thick card board using either a sharp needle or my compass. I simply put the card underneath the plan and copy the part by piercing the outlines onto the underlying card.


After shaping it, white glue was applied to harden and smoothen the card.


Then I attached the self adhesive foil with wood pattern, which was later altered with black oil paint.


The pintle and gudgeon were made from ~0.3mm wire and 0.3mm paper respectively, painted with a black marker and the rivets imitated with a needle that has no sharp end (was a defect production in the box, turning out useful).



Attached to the ship it looks like this:


The visible part of the tiller was painted with oil paints burned umber and burned sienna.


The channels have been made from 2mm card and pierced with the circle.



a) self adhesive foil attached,

b) marked from the other side, where the holes are,

c) and d) holes pierced from the right side INTO the piece where the marks are to avoid a crater-like appearance on the surface.


So that the final result looks like this prior to altering with black paint:



Support beams were made from 1mm card with ready attached and altered foil on both sides.


Attached to the ship it looks like this:



The catheads were made from several pieces of 0.3mm card/paper and the pulley sheave was imitated with a 0.4mm wire painted black with a marker.


The self adhesive foil was used all around the cathead.


Later I decided to try out modelling a real cat head, but they look more like some dirty little 2-3mm sized bear heads...




The chains underneath the chain plates were made from a tiny chain and paper, painted black.




Right now I've finished the rigging on the stem, but had some problems with the top sail halliard. More on it in the next post as well as how I made the deadeyes...








Kind regards,





Edited by RdK

Share this post

Link to post
Share on other sites

Hi there!


Thanks Steven. I am glad you enjoy the build.


Backstays or Halliard? ....and the tricky deadeyes


While rigging the ship this year I've noticed that the plans either lack the fore top yard halliard or the backstays. If I read the plan correctly, the red line in the next picture is identified as a "padun" or "pardun" (polish), which comes from the Dutch word "pardoen" and translate into english as the backstay.



So when mounting the fore top yard, I've noticed that the halliard is missing in the plans. Either or... However, Anderson's book about rigging in the 17th century helps me to sort out the problem. More on this when I have done the top sail halliard.


Back when the ship did not have masts yet, I tried to figure out, how to make deadeyes that look realistic (enough). I was not very satisfied with the result from paper/card. They were constantly too soft and too flat and broke apart between my clumsy fingers. I lack the tools to make them from wood, or it would have taken me forever to carve each and everyone by hand. So I decided to make them from the model clay (the one DORIS is using for sculpturing).



First I made one template from wood.



Then used the clay to form a negative casting mold...


...for both sides of the deadeye. One side had no marks for the holes so they would not misalign while glueing the two parts together.


After baking for 30-40 minutes at 130 degree centigrade I cut the excess material off and glued them on a tiny card sheet.



After cutting them out, the other half was glued, then I drilled the holes, painted black and a second layer with brown.


And here's the result from drilling as seen on the other half that had no holes:



So much for now. More on the masts next time.




Share this post

Link to post
Share on other sites

I hope you're having a nice break, Radek. Will you be coming back to this build, or is it still on hold? I really like your guidance on techniques in card modelling, so am looking forward to more!



Share this post

Link to post
Share on other sites

Hi Tony


sorry for not posting in a while. Yes I have a little break as life is catching up. I have to finish my PhD study this year and you can imagine things always get a bit stressed in the end.


The Mayflower is almost finished and as soon as I have a bit time spare I will continue the story here.


But don’t worry, my Mayflower should be ready for her 400 year voyage anniversary!



Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
  • Create New...