Jump to content
cpt. Tom

Le Gros Ventre - Gabare du Roi by Cpt Tom - 1766 - 1/48 Scale

Recommended Posts

Hi Folks,

 

today I started my new Project and my first Scratch Build Log.

 

The "Gros Ventre"  the Kings Gabare according to plans from Gérard Delacroix. 

I want to build the ship with pear wood and I hope i can handle it  :D  :D

 

Here are my first steps:

 

post-4740-0-81208000-1400703126_thumb.jpg

threaded bars....I hope this is right

 

post-4740-0-72635700-1400703133_thumb.jpg

washers

 

post-4740-0-00015800-1400703143_thumb.jpg

nuts

 

and the Woodparts

 

post-4740-0-20168500-1400703157_thumb.jpg

 

post-4740-0-72087800-1400703160_thumb.jpg

 

Now I´m waiting  for the plans, they are one the way to me. 

 

Stay tuned 

Share this post


Link to post
Share on other sites

Looking forward to this build.  The LGV is a gorgeous ship.  I have the Ancre monographs which are really well done.  I wish I had the experience to tackle it :)

Share this post


Link to post
Share on other sites

Hello Mike,

 

I have not the experience but I think.......learning by doing....... :D

Thank you that you look further to my Build Log  :piratebo5: and enjoy your Day, we have nice weather here, sunny with no clouds......coooool....!

Share this post


Link to post
Share on other sites

You are welcome too Chris.....wow in 1/36 this is big and you can Install more details....great, I can´t wait to see the first pictures  ;)

Share this post


Link to post
Share on other sites

I will be watching your build with interest. I am halfway through the hull framing on my Gros Ventre. Are  you buiding it fully framed?

Dick

Share this post


Link to post
Share on other sites

Hello Dick,

 

yes I want to try it, I mean "full framed" and it is absolutely great that so many guys  have the plans and maybe you can help me with my experiment "scratch build"  :D  :D  

I'm still waiting on the plans, they are now one week on the way and France is a neighbor from Germany but it takes so much time until they are here. I know I'm impatient :)  :)

Share this post


Link to post
Share on other sites

Should prove to be an interesting build.  I read Napier's book and found this model interesting.

David B

Share this post


Link to post
Share on other sites

Yes Sir, take a chair but you have to wait until next weekend then comes popcorn and beer..........hopefully

 

Today came to the pear-wood in different strengthen but not the plans  :huh:  :huh: I love this very warm wood and the beautiful wood grain

 

post-4740-0-43476800-1400943883_thumb.jpg

 

post-4740-0-99942500-1400943886_thumb.jpg

 

 

Share this post


Link to post
Share on other sites

Should be a fun project, but why"Gros Ventre" for a name. There is an indian tribe in Montana with that name and it means "Big Bellys" any way thats,what everyone calls them except for themselves. Just saying. Bill in Idaho

Share this post


Link to post
Share on other sites

This barge was used also for expeditions Bill and the Name " Gros Ventre - Big Belly" is right because this ship could take very much charge.  More than other ones and this is why they named her "Big Belly" Yes, it is a funny name........but whatever  :D  :D

Share this post


Link to post
Share on other sites

She's a transport ship - love the name ! That Pear is a very interesting in color - much paler than the Swiss Pear i see here in the US. Are you going to build exclusively in Pear ?

Share this post


Link to post
Share on other sites

Hi Chris,

 

yes I wanna do this and yes it is paler than the Swiss Pear, I love this one more and if you put a wood protection on it, it looks even better

 

Look at this picture I put this on (I don´t know the English word for this)

 

post-4740-0-66240000-1401029318_thumb.jpg

 

post-4740-0-30549900-1401029324_thumb.jpg

Share this post


Link to post
Share on other sites

Hi Tom,

 

I just recently lucked out and bought the monograph and plans through MSW/Chuck Passaro. It looks like a very nice ship and I'm hoping to tackle it someday, so I'll be eagerly following your build.

 

I have been using pear wood myself on a current build, not swiss pear. I've really like the way it looks and I think you've made a great choice. 

 

 

Clare

Share this post


Link to post
Share on other sites

Thank you Clare and I wanna say thank you folks for all the "likes" you did.

I hope I do not disappoint you  :)  :)

Share this post


Link to post
Share on other sites

She's a transport ship - love the name ! That Pear is a very interesting in color - much paler than the Swiss Pear i see here in the US. Are you going to build exclusively in Pear ?

 

Chris,

 

There's two kinds of pear wood.  The pear cut from the tree and allowed to dry and swiss pear which is the same wood but steamed which gives it the pink color.   Both Hobbymill and the Lumberyard have both.

Share this post


Link to post
Share on other sites

AHHHH! Now "Gros Ventre" makes sense.  The use of pear wood is interesting because in the wood turning world any fruit wood is avoided because its relatively unstable. Partly I think because turners use much bigger chunks than do ship modelers. About 14 years ago I got some 4" diameter branches from a local orchard and cut it into  a 4" thick billet but It still checked pretty bad. But I just checked and my 1" thick boards are pretty clear. Hmm maybe I have a project coming up.  BILL

Share this post


Link to post
Share on other sites

Hi Bill,

 

a friend in a German forum builds for many years his ships with pear wood  and he also makes small round rods from the wood for deck support without problems. Of course I do not know how the wood looks in 50 years :D  :D

Share this post


Link to post
Share on other sites

Hello Tom.

I wish you much fun and succes in the construction of the model.

 

Regards Karl      :10_1_10:

 

 

Ich wünsche Dir viel Spaß und Erfolg bei dem Bau des Modelles,

und werde den Baufortschritt verfolgen.

Gruss Karl

Share this post


Link to post
Share on other sites

It is an honor for me  if you watch my build log, Karl and maybe you can give me some advices.......!!!

 

I'm still waiting for the plans but nothing is happen until today  :(  :(

 

 

 

Es ist eine Ehre für mich wenn Du meinen Baubericht verfolgst und vielleicht kannst Du mir einige Ratschläge geben, Karl. Danke

Share this post


Link to post
Share on other sites
Hi Tom, I started the construction of Les Gros Ventre about an year and a half but  I have not started my scratch build log yet.  As I live in Brazil, I have to mill my own wood, and It takes time and money (a lot!) because I had to buy the machines for the job. They are all from PROXXON. I'm using a wood called Peroba Rosa, and I'm still building the frames. I hope we can share our experiences, although I'm not a expert. First of all, be careful about the lenght of the pieces "f" and "d". In plates 1 and 4 they are longer than in plates 8, 15 and 23 (which are the proper length).

 

Regards

 

Mauricio

Share this post


Link to post
Share on other sites

Hi Folks,

 

the plans are there........my goodness, looks a little bit difficult. Now I need to copy the plans and then cut the parts of. I think this coming weekend I'm doing the first images from my results  :P  :P

 

Hola a Sao Paulo or Olá a São Paulo

 

Hi Mauricio,

 

a very warm welcome to my build log and thank you for the information you gave me. I´m take care about that and you are right they are longer as in 8 or 15.

Peroba Rosa is a nice wood with a red touch but too dark for me, can you make some pictures for me??

Of course we can share our experiences but it is better if you start a build log too so that I can see what you're doing........!!!

I'm not an expert too, this is my first scratch build and I have to figure out how this works  :D  :D

 

post-4740-0-88257100-1401263101_thumb.jpg

 

post-4740-0-32461600-1401263105_thumb.jpg

 

post-4740-0-39263200-1401263109_thumb.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...