Jump to content

HMAV Bounty by Ian B - FINISHED - Billing Boats


Recommended Posts

Hi

I thought I should share my build as reading other peoples have been a great help and inspiration.

 

Here are some pictures of the early stages, for a new person I spent the first week or so reading and re-reading the instruction book and plans which for this kit were extremely vague for 99% and the obvious bits had excellent detail! As I have nothing to compare it too I don't know if this is typical for wooden kits? I did buy several books on the subject to help --one on planking, one on rigging  and a general making model ships books which were excellent. I have posted some pictures which dates from Jan 2014 to date. I have stuck closely to the plans but the jolly boat in the kit looked wrong to me so I used the Caldercraft jolly boat kit which has loads of detail which I will show in another posting (when I have painted the oars etc.)  I shall also be ordering better anchors as the plastic ones even painted looked out of place.

post-13362-0-41499800-1401881053_thumb.jpg

post-13362-0-13275000-1401881094_thumb.jpg

post-13362-0-97335600-1401881211_thumb.jpg

post-13362-0-62171900-1401881338_thumb.jpg

post-13362-0-83574100-1401881377_thumb.jpg

post-13362-0-69641700-1401881472_thumb.jpg

Edited by Ian B
 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

She looks lovely so far.  I think the instructions can be hit or miss depending on the manufacturer of the kit, my current build has terrible instructions and I end up working off the sheets and looking at other folks builds to try to sort out what things should look like, but thats all part of the fun :)

Current Build

Rattlesnake

 

Previous Builds

18th Century Longboat by MS

HMS Victory cross section

 

 

 

Link to comment
Share on other sites

Welcome Ian

Who is the manufacturer of your Bounty kit? I haven't seen one like it before and some aspects of it are a little odd - I refer to the cannons for instance. Not a criticism just a query.

 

P.S - I'm silly it's Billings. I thought your name was Ian Billings! :o

Edited by aliluke

Cheers

Alistair

 

Current Build - HMS Fly by aliluke - Victory Models - 1/64

https://modelshipworld.com/topic/34180-hms-fly-by-aliluke-victory-models-164/

Previous Build  - Armed Virginia Sloop by Model Shipways

 

Previous Build - Dutch Whaler by Sergal (hull only, no log)

 

Link to comment
Share on other sites

It is amazing what a few days avoiding housework, gardening and DIY can do to my model :)

 

I have fitted the small cannonades and the rest of the hull detail and bow sprite , the mast is just mocked up as it still needs lots of work.

 

Yes it is a billings kit. I did see comments about too much plastic in it but there is only the anchors (which I finally got around to ordering the metal Caldercraft ones) and the main cannon carriages. I also ordered some lanterns for the stern a ship does not look right without them. So now it is on too masts and rigging yippee..

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

I must find a way of taking better pictures :) right from the start I have been showing my efforts on the sideboard of the dinning room. As friends and family visit they have been watching it grow.

post-13362-0-18378400-1402309434_thumb.jpg

post-13362-0-56728400-1402309482_thumb.jpg

post-13362-0-48542700-1402309505_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

That's better-- pictures in natural sunlight :D

post-13362-0-56619100-1402391840_thumb.jpg

post-13362-0-79205200-1402391878_thumb.jpg

post-13362-0-14229400-1402392204_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

Some goodies arrived in the post the other day...my anchors and lanterns.. I loved the way Flipperphil created his anchors in his build log so I am sure he wont mind if I use his idea... 

 

This is FlipperPhils Anchor, followed by mine in progress, I have drilled the holes and painted some small pins which I will cut short and fit to replicate the bolts/rivets then make the strapping . So my next decision is how many transom lanterns should I fit-1-2 or 3?

 

post-13362-0-69519400-1403162214.jpg

post-13362-0-82681600-1403162375_thumb.jpg

post-13362-0-15549800-1403162411_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

And we now have anchors :D

post-13362-0-92347100-1403186514_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

  • 2 weeks later...

this weekend I started knitting-- or so it felt like LOL! I have attached all the main lines for the foremast and dry fitted it to ensure all the lines were accounted for and long enough... I even started doing the rigging at the top..

post-13362-0-31573000-1404121969_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

Is it best to make the yards and fit them next before attaching the mast and rigging it to the hull?

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

Thanks , I just could not resist making a yard LOL!!

post-13362-0-72343400-1404376038_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

I have finally started to rig the foremast after having rigged the top two sections and fitting all the blocks before attaching it to the hull.  She has gone from being long on the side board to being tall :)

 

post-13362-0-15192400-1404892756_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

A very apt expression Duff being a Bristolian and now living 20 miles away..

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

  • Today I almost finished the standing rigging on the foremast and could not resist placing in the lower main mast as I had cut shaped and stained the other mast sections ready for assembly.

post-13362-0-91880800-1405009375_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

I finally finished the standing rigging plus the lines to haul the yards on the foremast, now to repeat on the main. The main mast is only dry fitted for now...

post-13362-0-91866800-1405604298_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

Thanks Keith, the end is in sight-- well the next 4 weeks fingers crossed :) My wife is a teacher and starts the long summer break next week so it will be a good time for that sewing machine lesson so I can rig and fit the sails to the yards-which I still have to make-both the yards and sails :)

 

One thing I will get around to completely re-doing is her stern. I was originally so pleased with it when I started many months ago but the more I read and see on here the more I realise not only is it unlikely ever to  have that decoration it is not even representative of stern decoration of that whole period..I know it would annoy me for years to come.. so the 'Star ship enterprise' type arch needs to go!!!

 

 

post-13362-0-48419600-1405674343_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

I have some ideas taken from other builds on here, watch this space in the coming weeks :)

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

  • 1 month later...

I have posted this on another thread talking about Buoys which inspired me to make some for my ship. but thought it worth also adding to my build. I am still working on the main and mizzen masts which should be ready for installing next week some time-fingers crossed

 

Using a couple of old glass beads a bit of string and some wire it makes a reasonable (I think so) facsimile of a 17c anchor buoy.

 

 

 

post-13362-0-05446200-1408544680_thumb.jpg

post-13362-0-43888900-1408544697_thumb.jpg

post-13362-0-11696700-1408544740_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

she is definatey  coming to life now neighbour

Its all part of Kev's journey, bit like going to the dark side, but with the lights on
 

All the best

Kevin :omg:


SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS.
KEEP IT REAL!

------------------------------------------------------------------------------------------------------------------------------------------------------

On the build table

HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 

 

 

HMHS Britannic by Kevin 

SD 14  - Marcle Models - 1/70 - March 2022 -  Bluebell - Flower Class - Revel - 1/72   U552 German U Boat - Trumpeter - 1/48  Amerigo Vespucci     1/84 - Panart-   HMS Enterprise  -CAF -  1/48     

Finished     

St-Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020

HMS Victory - Caldercraft/Jotika - 1/72 - Finished   Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 

Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat

Link to comment
Share on other sites

Thanks Kevin, yes she is. I just need to create some time to complete the rigging. I am looking forward to starting the yards then--something different :)

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

  • 3 weeks later...

My wife has been keeping me busy on the DIY front but I have now finished making the yards. In the kit they are only shown as plain yards with the appropriate blocks attached. I have with inspiration and pure plagiarism from other builds on here created stun sail booms, the support banding around the middle of the larger yards and feet ropes. For the foot ropes I drilled and glued in 3mm loops for stirrups, wrapped line around the yard to make the appearance of them being tied and painting them black. On reflection I should have not had the line tight but sagging slightly between stirrups.. never mind one to remember for my second build. The stun sail boom supports were made from soldered copper wire and blackened.

post-13362-0-24989000-1410349561_thumb.jpg

post-13362-0-47209600-1410349756_thumb.jpg

post-13362-0-05472600-1410350071_thumb.jpg

post-13362-0-95157300-1410350263_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

Unless advised otherwise my next actions are-

 

1.--- make the sails

2. fit sails to all yards

3. attach foremast yards to already fitted mast

4.attach main mast yards - then attach mast to hull

5. fit mizzen mast yards- attach mizzen mast.

 

The main and mizzen are only dry fitted, I thought it would give myself lots of room to work around each mast as I rig them.

 

 

post-13362-0-84604200-1410350746_thumb.jpg

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

Thanks Keith-- I will have a look at the rigging plan again and work the way you suggest. I had fitted the foremast and rigged it before seeing all the advise about not doing that as it was easier to fit yards and sails first..

 

Thanks Matti the blue was toned down by giving it the same coat of oak stain I used for the hull.

 

HMAV Bounty 'Billings' completed  

HMS Cheerful - Syren-Chuck' completed :)

Steam Pinnace 199 'Billings bashed' - completed

HMS Ledbury F30 --White Ensign -completed 😎

HMS Vanguard 'Victory models'-- completed :)

Bismarck Amati 1/200 --underway  👍


 

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...