Jump to content

Charles W Morgan by Gerald Spargo - Model Shipways


Recommended Posts

I have a lot of pictures of the Morgan that friends have sent me from all the forums I have been on, and from the internet. These ones I just posted came from Wayne, who I think is still a member here on MSW. If there are any particular photos you want, I may have them, and could send them your way.

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

Thank you Robert, I love detailing.

 

Well...............the first picture should explain why you might want a display case for your model. That is bad.

 

post-2322-0-50440700-1403396348_thumb.jpg

 

It did clean-up well though. So now I'm all setup, and working on it again. Looking, and working with small stuff again is going to take some getting use to again. Had to use my own seizing instructions to get going, couldn't remember how to tie the battens on. :)  

 

post-2322-0-38008300-1403396587_thumb.jpg

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

Guest Tim I.

Yikes, that is a lot of dust! Glad that it cleaned up well. As for the pictures, I am trying to glean as many as I can before I start my Morgan. Most likely I will not be able to start until this time next year. Currently I am scrambling to finish a scratch build project by the end of this month, then I will need to finish my Prince de Neufchatel and Niagara before I move on. My Constitution project is on hold as I buy extra materials, and do research. So I will probably work on my Morgan instead of the Constitution. So as my lengthy post says, I have some time to gather information. 

 

- Tim

Link to comment
Share on other sites

When I was stationed at the Submarine Base in Groton Ct. We were members of the Seaport and most weekends would find us roaming the grounds. I got to Groton as a 2nd Class Torpedoman and left as a Chief. I sorta grew up on the Morgan you might say. To see this build leaves me yearning for the days when my children were young and on cool fall days we would sit on the grass, eat clam fritters and watch the ship.

You are doing so a wonderful job my friend. I hope I learn as much as you have forgotton.

 

 

Chief

Author of the Submarine Thrillers

OF ICE AND STEEL and EPITAPH

Link to comment
Share on other sites

Thanks for reposting your pix, this was always my favorite build log.

Your woodworking, painting and chain-forging skills are unequaled. Can't wait to see the rest!

Tim

Tim

 

Current build: Continental Navy Frigate ALFRED (build log)                      

Past builds:     Steam Tug SEGUIN (build log in the kits 1850-1900 section)       

                         Liberty Ship SS Stephen Hopkins (Gallery & Build Log)

                         USS Basilone (DD-824) (Gallery & Build Log)

                         USS Olympia (Gallery)

                         USS Kirk (FF-1087) (Gallery & Build Log)

 

 

                        

Link to comment
Share on other sites

Well, I'm not far very fast. By the time I get to do anything in the evenings, I have enough time to tie on 3 battens.

Hope to be able to commit more time to my build at some point.

 

post-2322-0-78445100-1403784272_thumb.jpg 

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

Guest Tim I.

Gerald,

 

Frankly I envy a slower pace. Many family members and friends and requested ships, along with my museum work. So this leads to me having to work quickly. I think a much slower and gradual pace leads to excellent work, especially in your case.

 

So no worries! Looking forward to the next update.

 

- Tim

Link to comment
Share on other sites

Yikes, that is a lot of dust! Glad that it cleaned up well. As for the pictures, I am trying to glean as many as I can before I start my Morgan. Most likely I will not be able to start until this time next year. Currently I am scrambling to finish a scratch build project by the end of this month, then I will need to finish my Prince de Neufchatel and Niagara before I move on. My Constitution project is on hold as I buy extra materials, and do research. So I will probably work on my Morgan instead of the Constitution. So as my lengthy post says, I have some time to gather information. 

 

- Tim

Tim, I'm in the DC area but am supposed to go to a wedding up in CT in the fall.  If my family will let me squeeze it in, I'm hoping to make a trip to visit the Morgan, as I have the kit on my shelf.  If I can make it, I plan on taking plenty of pictures that I can share with you and others on here that might be interested.

 

Sorry to interrupt your log Gerald.  :)  Love your work - your Morgan is setting a very high standard for my future build :)

Edited by Landlubber Mike

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32  Eduard Sikorsky JRS-1 1/72  IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Link to comment
Share on other sites

Guest Tim I.

Sounds great. I am currently in the process of listing my house and hopefully moving into a new one by September. I hope to lay the keel of my Morgan in early January next year.

 

- Tim

Link to comment
Share on other sites

Terrific attention to details! After I get some experience I intend to refurbish and add some details to the Morgan my grandfather built. I will bookmark this thread as a guide for sure!

 

I trust everyone has seen the pictures from Mystic Seaport regarding the Morgans 38th voyage. That ship is breathtakingly magnificent! I visited Mystic a couple of summers ago during her restoration. I was not a hobbyist then so I don't have any useful photos for you unfortunately. It breaks my heart that I don't have the time, money or resources to see her set sail this summer. I hope anyone who has the opprotunity will go. The Morgan is in New Bedford this weekend through the 4th!

 

Excellent work, thank you for sharing this build.

 

From Mysic Seaport's FB page:

 

post-13867-0-61680600-1403884204_thumb.jpg

Link to comment
Share on other sites

Thanks everyone for the kind comments. It will be nice to see more Morgans being worked on. I may not get a whole lot done this weekend. I have part of a garden getaway to get put up in the backyard. I need to get up what I've got built so far, cause I'm plum running out of room in the shop.

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

Hi Gerald, thank you so much for posting this build log again. I look forward to watching the progress. I should be back in the shipyard by the end of Sept or Oct. You should be far enough ahead off me to really help me with the rigging. I'll get the missing pictures of mine up, but unfortunately it will be after I get back home. The missing pictures are on my other computer. I do have a flash drive with me that might have them on it, but right now I can't find the drive. Packed somewhre in the RV. I put in quite a few details on the tryworks area. Mostly tools and things to clutter it up. Keep it up. I was making and installing deadeys and chainplates when we left in May. Question, did you use a seizing machine on the lines?

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

I used a serving machine that I made years ago when I first started the rigging. Made of wood, and old printer parts. There is also a rope with an alligator clip that goes with it so I can serve short lines too.

 

post-2322-0-54686500-1404479777_thumb.jpg

post-2322-0-42060200-1404479809_thumb.jpg

post-2322-0-61521700-1404479820_thumb.jpg

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

This is my vertical ropewalk that I use for making my rope. 

 

post-2322-0-72122700-1404480188_thumb.jpg

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

Thanks for the pictures. I have one of Alexy Domanoff's serving machines. I don't have the rope walk though. In your opinion should I try to make my own rope or is the kit thread good enough. I've never tried to make my own and wonder if it's worth the effort. I don't think I've heard very many comments on this subject, but seems like a lot of the guys do it.

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

It would just be a matter of how much work you want to put into it I guess. Making your own, makes the rope look more realistic. It also gives you the satisfaction of making your own rope, just like you made all the other parts on your ship. All that scratch building of everything on that deck doesn't have to stop with the wood, and metal. It can continue with the rope, all the way to the top of the mast. In the end, it would just make you all that much more proud of what you accomplished.  

 

I don't mind making my own rope, but it wouldn't bother me to much to use kit rope either. I made my own standing rigging because I couldn't do what I wanted with the nylon rope that came in the kit. The lower shrouds that are served, are the actual kit rope. Didn't see any reason to make rope, just to cover it up with serving. The rest of the standing rigging will be handmade though. Running rigging, I'm thinking about using kit rope. Not necessarily Model Shipways though. I don't like how the nylon hangs onto that bend it gets from being wrapped around those plastic tabs.

 

I did use Model Shipways rope on my Bluenose ll, and I thought it looked fine.

 

Now with that all said, we also have Chuck. If you want more authentic rigging, but don't want to make it, then we can get it from Chuck, and let him do the work. :)    

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

That really looks impressive Gerald. Would love to be there to see her. Do all the whaleboats have a blue trim at the top or are they diffferent colors? I'm not sure I've ever seen them all together before?

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

Gerald,

Thanks for reposting your build. When I first returned to the hobby after a 40 year hiatus, I found your build and was blown away to say the least. I have a Revell CWM that I have been building/not building for the last year, trying to copy some of your work. I hope you do not mind.

Steve

Current Build: Merit 1/48 Early Eco 80' PT Boat and Imai 1/50 Catalan Ship

Finished:

Revell 1/196 USS Constitution (My oldest son's school project)
Revell 1/72 Hanse Kogge
Revell 1/50 Viking Ship
Revell 1/72 U-Boat
Zvezda 1/72 English Medieval Ship Thomas

Revell 1/90 The Nina

Link to comment
Share on other sites

Hey Scoot, thanks for that pic, that has got to be an awesome site in person.

John, the way I take it, is whaling ships would pick up new whaleboats from different builders to replace damaged ones where ever they docked at, so they could continue on with they're voyage. So they probably were not all the same. 

docidle, I don't mind at all if you copy what I am doing.

 

I'm on the home stretch with the lower shrouds.

 

post-2322-0-46449400-1405045976_thumb.jpg

 

 

I made a change on the way though. I was every once in awhile stretching the distance of all 5 shrouds with the battens, because that's what the plans showed. But, I couldn't find this in any of the photos that I have. So I removed that part of the batten.

 

post-2322-0-54399600-1405045992_thumb.jpg

 

 

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

Guest Tim I.

I have the same chopper tool in the background. Mine does not always cut flush at a 90 degree angle.

 

Your shrouds are looking great!

 

- Tim

Edited by Tim I.
Link to comment
Share on other sites

Looks good Gerald, I'll be there too someday soon.

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

My chopper's the same way, but the true sander next to it takes care of that problem.

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

Hey John, can't wait to see your rigging going up. Just don't let that Morgan curse get to you. I'm looking forward to getting to the running rigging.

Gerald Spargo    (aka Dragon65)

For a ship is the noblest of all men’s work--A cunning fabric of wood, iron, and hemp, Wonderfully propelled by wings of canvas, And seeming at times to have the very breath of life.

 

Current Build:

Charles W. Morgan - Model Shipways

Link to comment
Share on other sites

Yeah Gerald, I'm looking forward to getting the shrouds done. My problem to start will be to figure out how long to make them so that they meet the deadeye correctly and then getting them siezed properly.

John

Current Current Builds:

US Brig Niagara on my website

FINISHED BUILD LOGS:

New Bedford Whaleboat - page on my Morgan Website:  http://www.charleswmorganmodel.com/whaleboat-build-log-by-john-fleming.html

C.W. Morgan - Model Shipways 1:64 http://modelshipworld.com/index.php?/topic/1785-cw-morgan-by-texxn5-johnf-ms-164-kit/

USS Constitution - Revell 1:96 http://modelshipworld.com/index.php?/topic/1796-uss-constitution-by-texxn5-johnf-revell-196-kit/

 

website US Brig Niagara Model http://www.niagaramodel.com

website Charles W Morgan Model http://www.charleswmorganmodel.com

website PROXXON DISCOUNT TOOL STORE http://proxxontoolsdiscount.com

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...