Jump to content
dafi

HMS Victory by dafi - Heller - PLASTIC - To Victory and beyond ...

Recommended Posts

... if that is ok with you ...

... have to think about that ...

 

*think*

 

*think*

 

...

 

*think*

 

...

 

*enlightment*

 

... of course! You are welcome, what a question :-)

 

Cheers and thanks, Daniel

Share this post


Link to post
Share on other sites

sorry Dafi - just catching up, those photo of the gun crews are brilliant - people also need to remember that there is not a lot of room in there and another gun crew would be right next to them doing exactly the same procedure, must have been hell, especially if in rolling seas in battle conditions

 

both my builds are to one side at present, as i am doing another project - which is non ship related - but does involve a kit, in fact it is some warhammer scenery i am doing to improve my painting skills,

Hope you are well

 

kevin

Share this post


Link to post
Share on other sites
Yeah some are stuck for a fortnight in the ice of the Antarctica, but nobody tells about dafi, being confined for 3 weeks in the austrian mountains, far off his beloved ship yard ...

 

But also the mountains sometimes surprise with maritime content, as to be seen with the SMS Trinkstein ...


 

Also this time dafi had his maritime moments and that was not surprising ;-)

 

There in the deepest valley, where the sun refused to shine, there she was lost, the proud Stixtenstein, lost long ago in the dark days of lost tales, lost in the rigid hardness of the towering mountains beside, just in the wake of the safe harbour of the fortress. Deeply sunken into the elements only the topgallant of her once sky scraping proud masts still was greeting the sea-farers ...

 

... and of course, dafi had to follow immediately his primal instincts, sending himself aloft ...

 

Austria-140103_1547.jpg

 

... and putting in two reefs of clouds to make the sun shine again :-)

 

Austria-140103_1545.jpg

 

And now greeting happily as dafi finally learned, that there is no problem to climb up overhanging ratlines like the futtock shrouds and wishes a happy 2014 to everyone!!!

Share this post


Link to post
Share on other sites

May you soon be out of the mountains and back in the safety of your shipyard.   Will there be an attempt to raise the Stixtenstein?????

Share this post


Link to post
Share on other sites
Papa got a brand new toy :-)

 

Until now I used a low-cost-solution: 7 Euro from the supermarket 3 dioptrien with LED!

 

Victory_glasses.jpg

 

But then the fam saw me  looking at those magnifiying glases at the optitian ...

 

... and surprise!

 

Got them for X-Mess :-)

 

Victory-140112_1582.jpg

 

Restartet doing some micro-surgery ...

 

Victory-140112_1580.jpg

 

... and therfore: Big Grin !!!

 

Victory-140112_2.jpg

 

With 130 Euro a bit more expensive then my old one, but much more comfortable than the ones that go around the head, almost no weight, no destroyed hairdo and to be worn over the normal glases and better vision than my cheap glases.

 


 

Cheers, Daniel

Share this post


Link to post
Share on other sites

Dafi,

 

I have been thinking about getting a pair of those lenses. I didn't realise that they also give new dimensions to self photography! :o  :)  :) 

Share this post


Link to post
Share on other sites

The thumb thing, BTW, is a thumb stall.  It's not so much to protect the thumb as to seal the vent.  When the sponge or rammer is sent into the barrel it pushes air and you don't want that going through the vent as it can ignite left-over embers and cause the new cartridge to ignite as it's rammed home.

 

The thumb-stall is a very important safety job and isn't just laid on the vent.  It's pressed on and twisted so the tip of your thumb is pointed at your right hip with your elbow pointed to the right as you face toward the muzzle.

Share this post


Link to post
Share on other sites

Daniel........you are just plain having ....too much fun  :)    I have an optivisor.......hardly ever use it.   we have a discount store where I live,  that sells glasses with a variety of different strengths.......about $2.00 a pair.   I wear reading glasses with a strength of 1.25.......I also have a pair of 1.50 and 1.75.   I have a pair of 2.00.......but I don't wear them very much.......gives me a headache.

Share this post


Link to post
Share on other sites
Oh that feels great ...

 

... after being off for that many weeks - job, holiday, job - now back on the drug ...

 

... back in the shipyard again :-)

 

I already showed the carving ...

 

Victory-140112_1580.jpg 

 

... I tried long to finally find the right way to display those tendrils on the supports of the side entry port canopy. Positive carving, modeling with clay - nothing worked.

 

Then the idea to carve it in the negative way ...

 

Victory140114_1584.jpg

 

... and have a thin cast and glue it together :-)

 

Here the family juwels:

 

Victory140115_1598.jpg

 

Left bottom the old casted parts from the carved styrene carvings of the ones on my model. Left top sculpted with Magic Sculpt - not successful - , then the negativ carvings with a thin cast, below left the first test and right the improved carving with the thin face side sculted with Magic Sculpt and right the final casts and black the final cast with primer :-)

 

From near it looks like this:

 

Victory140115_1591.jpg

 

And with some paint it is near what i wanted to achieve ...

 

Victory-140123_1876.jpg

 

... then the small crown underneath the canopy with its flags ...

 

Victory-140119_1854.jpg

 

... both parts together ...

 

Victory-140123_1883.jpg

 

... feels good :-)

 

Now just the new canopy ...

 

Cheers, Daniel

Share this post


Link to post
Share on other sites

Daniel,

 

Discovered your build, thankfully, by accident. I was on the Victory Etch Parts web site and a link fell on your build. AWESOME, though I'm sure that you have read that adjective before about your Victory.

 

I will join your legion of followers as well. Spectacular build. Those etched parts are worth their weight in gold, well let's say silver at least (:-) Your super clever use of them is superlative.

 

Regards,

 

 

Michael

Share this post


Link to post
Share on other sites

Thank you very much Michael - just trying to do the best with my humble means :-)

 

XXXDAn

Share this post


Link to post
Share on other sites

good afternoon my friend

 

can any of the ageing effects you have used, be transferred  over to wood, as part of my Victory diorama, i don't want her looking pristine, but looking like she has had to work for her living, but not so much battle damage, just heavy used

Share this post


Link to post
Share on other sites

Hy Kevin, 

 

should be applicable without problem.

 

I used casein paints. A bit smelly - rotten milk - but wonderful to work with. If the wood is painted, you can apply the paint in thin layers with different shades until the wanted effect is reached or even take a wet cloth and take the paint off and restart over again. Once really dry it always will stay water soluble but is strong enough to hold it in the hand without leaving marks - if hands are not too wet ;-)

 

Cheers, Daniel

Share this post


Link to post
Share on other sites
Finally ...

 

... finished the canopy, was working on the whole set since late last year.

 

dafis law for modelmakers Nr 57:

If a part is not working well - try not to fix it - make a new one!

 

Here are the 4 parts for the entrance port:

Canopy, two pillars and the carvings with crown and coat of arms over the entrance.

 

Victory-140201_1981.jpg

 

And immediately the fitting test:

 

Victory-140201_1983.jpg

 

Victory-140201_1989.jpg

 

And here the painted version as shown before.

 

Victory-140201_1990.jpg

 

Cheers, Daniel

 

PS: I did not cut the port yet as I dot know if I still need the hull other wise ...

Share this post


Link to post
Share on other sites
Miracles happen ...

 

... I finally found time to finish the refined side steps on the spare kit ...

 

Victory-140209_2001.jpg

 

... first prepared single steps ...

 

Victory-140209_2006.jpg

 

... and here the revised version with the different depth of the steps underneath the admirals entrance :-)

 

Victory-140209_2009.jpg

 

Still a tad uneven, as just being fixed on double sided tape, but very near to what I wanted.

 

XXXDAn

Share this post


Link to post
Share on other sites
Doing what I can do best ...

 

... DESTRUCTION ...

 

Victory-140219_2268.jpg

 

... and even ...

 

... more DESTRUCTION ...

 

Victory-140219_2271.jpg

 

... okokokok ...

 

... I also cleared up ...

 

Victory-140220_2274.jpg

 

... the whole thing ...

 

Victory-140220_2277.jpg

 

... and then carefully choosing some important steps in the circle of life of a big ship :-)

 

Victory-140220_2290.jpg

 

Cheers, Daniel

Share this post


Link to post
Share on other sites

I can see a subtle difference Daniel,  in how everything looks.   you did very well with the reno  ;)   but,  I do have to ask why.......I thought you did a splendid job on this originally ;)   was it because you did a refinement on the replacement parts?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...