Jump to content
dafi

HMS Victory by dafi - Heller - PLASTIC - To Victory and beyond ...

Recommended Posts

Final sprint in view 🙂

 

Take a sprue, drill a hole and ...

 

Victory-1765-190731_7004.jpg

 

... heat it up and pull 🙂

 

Victory-1765-190731_7005.jpg

 

After some tries I had suitable tubes of 0,7 mmm outside and 0,3 mm inside. Alined them on 0,3 mm wire to be able to cut without smashing them by rolling under a knife.

 

Victory-1765-190731_7006.jpg

 

Drilled some 0,75 mm in the right angle into the ship ...

 

Victory-1765-190731_7007.jpg

 

... and glue the tubes in with a wire still as handling help.

 

Victory-1765-190731_7009.jpg

 

Checked the angle and checked the opening with a needle, then still applied some paint nice name "rotten leather" ;-).

 

 

Then fixing the halliards, to unravel the thread did not work as they were too thin ...

 

Victory-1765-190816_5955.jpg

 

... so held the thread tight onto a round edge and usied a sharpened needle in the right angle. Works rather easy ...

 

Victory-1765-190816_5953.jpg

 

... prepared the ringbolt ...

 

Ringbolts-1908117_7895.jpg

 

... threaded the bold and lead the free part of the thread through the eye of the needle, pulled ...

 

Ringbolts-1908117_7906.jpg

 

... and a second go for the splice, some glue and - DONE !!!

 

Ringbolts-1908117_7912.jpg

 

The port lids are waiting already 🙂

 

XXXDAn

Share this post


Link to post
Share on other sites

Thank you that is very interesting, Daniel.

Interestingly on

1566115288846-2092597226.thumb.jpg.c84bde5a8e2bb11ef694a1b4f8e73968.jpg

L'AURORE 1766 the hole gunport framing is painted on the hull. (Cannot shift the pic 90°)

1566115348303952263649.thumb.jpg.cf56a5c6650b1fb3859519dad938236f.jpg

On the other hand the cravings aft are astonishing

1566115398881467747083.thumb.jpg.4a76863852251f380a99502bf4ba9972.jpg

in detail and caftmanswork.

 

Something I do not understand - why this detailing was done there and wasn't invested somewhere else?

 

 

 

 

(All pictures from: G.Decacroix Corvette L'AURORE 1766 - 1775 Ancre/Paris 2000)

Edited by Heinrich der Seefahrer

Share this post


Link to post
Share on other sites

Hello Daniel,

creative attack on that problem. Wounderfully made parts!

 

And to keep things easier: Cutton buds do have plastic rods that stay as a pipeline if you get them lengthened over a flame - so the drilling before is not necessary. (It is an important tip from the Wingnut Wings website due to the rigging.)

 

Hth.

Share this post


Link to post
Share on other sites

Thank you, this is where I got the basic idea from 🙂 

 

But using the sprue I can choose the basic color and also can specify the ratio from internal to external diameter, as this one stays the same throughout the procedure.

 

XXXDAn

Share this post


Link to post
Share on other sites

Made the missing lids ...

 

Victory-1765-190812_7844.jpg

 

... drilled the holes for the hinge ...

 

Victory-1765-190812_7841.jpg

 

... fixed with the necessary distance ...

 

Victory-1765-190812_7851.jpg

 

... and put in the lanyards.

 

Victory-1765-190812_7854.jpg

 

 

The half port lids need extra distance as fort the moulding. 

 

Victory-1765-190812_xxx.jpg

 

So the hinges are quite far out.

 

Victory-1765-190812_7848.jpg

 

Also put in the lanyards. 

 

Victory-1765-190812_7849.jpg

 

Coming close to the finishing line 🙂

 

Victory-1765-190812_7856.jpg

 

XXXDAn

Share this post


Link to post
Share on other sites

And one more piece finished 🙂

 

Victory-1765-final-190816_7863.jpg

 

Victory-1765-final-190816_7865.jpg

 

Victory-1765-final-190816_7869.jpg

 

Victory-1765-final-190816_7870.jpg

 

Victory-1765-final-190816_7873.jpg

 

Victory-1765-final-190816_7875.jpg

 

Victory-1765-final-190816_7878.jpg

 

Victory-1765-final-190816_7880.jpg

 

Victory-1765-final-190816_7882.jpg

 

Victory-1765-final-190816_7884.jpg

 

The material of the guns is still in discussion. Did the Vici n 1782 still have brass guns - as Bugler and McKay see as a possibility - or did she have already iron ones. As discussed before, I will keep you updated.

 

So that was no. 2 out of four being ready now. Approx. 1780 and 1920 are done, 1805 and 2018 still to follow.

 

Victory-1765-final-190816_7860.jpg

 

Cheers, dafi

Share this post


Link to post
Share on other sites

On the road again, meeting Viccies, seeing colors that I´ve never seen ...

 

Adapted the color of the 2018 version a bit. Funny, like the original, it reacts very much upon the light. Looks different every time ...

 

Victory-2018-190817_7913.jpg

 

 

Fixed the board that protects the hammock cranes from underneath. 🙂

 

Victory-2018-190817_7915.jpg

 

Victory-2018-190817_7917.jpg

 

Cheers, XXXDAn

Share this post


Link to post
Share on other sites

Finally took the time to continue a bit.

 

Here are the parts again, that I prepared some time ago 🙂

 

Victory-Schnittchen-181223_2569.jpg

 

Still work in progress, have to clean up, apply some paint and the batten on the channel board.

 

Victory-2018-191011_8240.jpg

 

XXXDAn[/quote]
 

Share this post


Link to post
Share on other sites

Do not have too much time to busyness commitments. So even small things deserve a small accolade for personal encouragement.

A new gun port lid ... 

 

Victory-191022_8251.jpg

 

... and got from a comrade a wire 1,5 mm outer diameter and 0,5 mm inner diameter, so the small protection for the lid lanyards can be done more easily.

 

Victory-191022_8248.jpg

 

Victory-2017-191115_8258.jpg 

 

Victory-2017-191115_8262.jpg

 

And the hammock stanchions are fixed too ...

 

Victory-2017-191115_8256.jpg

 

Victory-2017-191115_8257.jpg

 

... and a little later were knocked down - of course  :-0

 

Also the chains suffered a bit, but my experience tells me that that is easily to be done 🙂

 

XXXDAn

Share this post


Link to post
Share on other sites

Hello Jan,

 

no the big one is too late for that, even though I already have a reminiscence for that, get surprised ...

 

... in some years or so 😉

 

For the small 2017-slice, I adapted as far as I can judge. Even with all the help from the friends here including the color samples, the color is still quite miraculous to me, as its appearance changes a lot through the light and shades. Have to see it one day with my own eyes to be able to understand it completely.

 

But not to let you down dear Jan, I will soon take out the wrecking ball and ELIMINATE a part that needs to be replaced, funnily one of the parts that is "original kit" - More soon.

 

XXXDAn

Share this post


Link to post
Share on other sites

Thanx Popeye!

 

And on we go:

Fixed the hammock nettings on a cardboard and paint them white and buffy colors. 

 

Vic-2017-191124_8455.jpg

 

Then first the short side, using paper for the netting not to get stuck on the stanchions and small wooden sticks to press the nettings down properly.

 

Vic-2017-191124_8459.jpg

 

Then the long side. Paper again to facilitate the insertion, then fixing the netting with superglue onto the stanchions. 

 

Vic-2017-191124_8460.jpg

 

To have a better perceptibility I introduced some darker paper and fitted the nettings to correct size with a very pointed scissors.

 

Vic-2017-191124_8466.jpg

 

For the adrenaline not to go down too much, I user a lighter´s flame to get rid of some excess superglue :-0

 

Vic-2017-191124_8471.jpg

 

As all parts survived the procedure, the upper holding rope was fixed and the netting glued onto it 🙂

 

Vic-2017-191124_8472.jpg

 

Vic-2017-191124_8473.jpg

 

Vic-2017-191124_8474.jpg

 

Vic-2017-191124_8475.jpg

 

Vic-2017-191124_8477.jpg

 

In the meantime - using some drying time - I also fixed some ringbolts of the 1805 version on the channel boards ...

 

Vic-2017-191124_8457.jpg

 

... and fixed the boards onto my slice.

 

Vic-2017-191124_8469.jpg

 

All the best, dafi

Edited by dafi

Share this post


Link to post
Share on other sites
18 hours ago, dafi said:

I guess the visitors will expect the ship to be "modified" so they don't bang their heads?   :D

 

There's also a good laugh from following one of the links on that page:  https://www.thesun.co.uk/news/8432416/snowflakes-offended-by-wench-and-peasant/

Share this post


Link to post
Share on other sites

But ok, it is time to really start the Trafalgar slice.

 

One remembers: Te ship was recommissioned in March 1803. Possibly with the yellow and black lines, no checker yet. If ever or if when this one was applied, I found no contemporary sources. It might well be that the checker was only a post Trafalgar feature.

 

The ship hastily sailed into the Mediterranean Sea where it stayed over winter. In April 1805 it starte it famous cruise to Sicily, Gibraltar, Caribbean Sea and back, chasing Villeneuve. On the return in August the hull was painted while being still on sea. End of August, It entered a refit in Spithead, start of September plenty of paint was delivered, a week later they were out on sea again. Possibly plenty of paint jobs were still ongoing at this moment.

 

The stress of the voyage and the very stressful and time squeezed refit make me think, that the lovely lady possibly already looked a tad shaken already before the battle on 21.10.1805. Especially I imagine plenty on competing touches of paint ...

 

Turners drawings show clearly the build up forecastle with its gun ports. Not to be seen the timber-heads, shown in most contemporary drawings and models. So I adapted those. Not to forget, the drawings show the ship after hasty repairs at Gibraltar, perhaps those were omitted in the reconstruction of this heavily damaged area.

 

For the positioning of the yellow strakes I go closely with Maik´s wonderful analysis of Turners drawings.
https://www.segelschiffsmodellbau.com/t7042f1475-HMS-Victory-Spurensuche.html

 

Victory-1805_191203_8487.jpg

 

First fitted the chain boards with lines of Apoxy Sculpt, my favorite way of doing things like that.

 

Victory-1805_191203_8489.jpg

 

Then searching for the color split lines with markings on tape ...

 

Victory-1805_191203_8491.jpg

 

... and a first layer of yellow ochre. Not the real final shade yet, only to find the proportions.

 

XXXDAn

 

Share this post


Link to post
Share on other sites

After the 2016-slice was rather in a ship shape Bristol fashion, I would like to go another approach for the 1805 slice.

 

In the times when there was no RAL, Pantone or DIN color scales, I would suppose that each barrel of paint had a slightly different shade depending upon its provenance, batch or age. Also each barrel from each batch could have been given a different shade depending upon the intermix of the content or the fading stage as of sun and salt or the rust and dirt sitting on the surface. Also given the accounts that the Vic was painted several times being upon high seas, I would rather expect a nice patchwork of 50 thousand shades of yellow ochre. Yes it´s alive!

 

Victory-1805-191213_8492.jpg

 

Victory-1805-191213_8496.jpg

 

Victory-1805-191213_8493.jpg

 

Victory-1805-191213_8497.jpg

 

Victory-1805-191213_8499.jpg

 

Victory-1805-191213_8501.jpg

 

And did you discover it? Even the new todays "seamon-pink-hello-kitty" can be found, yes down there, in the left bottom corner, just around the rigol 😉

 

Enjoy, XXXDAn
 

Share this post


Link to post
Share on other sites

Hi Daniel/Dafi/DAn, I stumbled on your amazing blog and wanted to say thank you for posting an entertaining, educational and inspiring blog!

 

In particular I enjoy seeing the fine scale work and figurines which injects so much life into your model and makes the inner workings of the ship more relatable to land lubbers like me.

 

Hoping to see more posts to satisfy our dafi fix 😄

 

Cheers,

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...