Jump to content

Stavanger by mikegerber - Scale 1:15, SMALL, RADIO, Colin Archer design


Recommended Posts

Hello everyone

 

... below, a short visit on a sideshow - making of the mast bed - at this time still raw, will later try to cover it with snow ...

 

... hmm, sorry! - I mean covering with canvas.  ;)

 

post-14773-0-78636600-1444423733_thumb.jpg

 

post-14773-0-77854000-1444423765_thumb.jpg post-14773-0-54118000-1444423777_thumb.jpg

 

post-14773-0-06757400-1444423794_thumb.jpg post-14773-0-57920400-1444423869_thumb.jpg 

 

post-14773-0-48898600-1444423805_thumb.jpg post-14773-0-30815600-1444423853_thumb.jpg

 

post-14773-0-68500100-1444423837_thumb.jpg post-14773-0-65836000-1444423821_thumb.jpg

 

Best regards,

Mike

Edited by mikegerber

current scratch build 1:15

 

Colin Archer - RS14 "Stavanger"

Link to comment
Share on other sites

Mike, your ring of wood looks very nice. I have a concern though that with time the ring might fracture because of the difference between end and face grain. i think it would have a lower chance of distorting if you made it from segments of vertical or quarter sawn grain the stresses on the ring would then be equal around the perimeter.

There is a potential for the wood to move in a more uneven way when it is made from a solid piece.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

Something I see through the whole log: some mighty nice tools you have there. I not only admire your work but your tools too  ;)

No really it seems that it is with great ease that you create these wonderful objects. Great to see!

Fair winds and following seas,

 

Jan-Willem

 

 

current build: Billing Boats Bluenose "the anonymous schooner" (enhanced-bashed-scratched-whatever) in a scale between 1:55 and 1:69

Link to comment
Share on other sites

Hi everyone ...

 

@Michael

Thank you for your constructive feedback. It forces me to reconsider certain things.

 

Of course you're right about your concerns of wooden grain structure. Gluing of similar segments to get a uniform blank would be the correct solution.

 

This seems to me somewhat disturbing, because by professional reasons I have very internalized static and dynamic properties of wood and usually these properties are always present to me. In this case, I have considered the subject too little from this point of view.

 

It is well aware that there is no such a simple ring in the original, but there are individual wedges. Since I've provided to cover the mast bed with canvas, I looked at this item only as a model technical substructure - hence such a ring as one piece. After all, he is from oak, so I've to check if it holds enough under stress or not ...

 

post-14773-0-09127100-1444591950_thumb.jpg

... Michael, you see, there are discussions going on.  ;) 

 

@Jan-Willem

Thank you for a such great testimony and appreciation.

 

Yes, you probably noticed that correctly, this worksop has accumulated a veritable machine park - I'm myself sometimes something between amazed and scared :huh: - but someway it commits to stay at work.  ;) 

 

... thanks all of you for feedback, comments and likes. Always greatly appreciated!

Best regards,

Mike

current scratch build 1:15

 

Colin Archer - RS14 "Stavanger"

Link to comment
Share on other sites

Link to comment
Share on other sites

  • 2 weeks later...

Hi Hartmut, Patrick, Lawrence

and all other visitors.

 

Thanks for visiting the shipyard and all your great feedbacks with such estimated comments!

 

Currently the activity in the shipyard is heavily slowed down - the duties of everyday life are so many ...

 

Anyway I could start with nailing the deck. My work was first to research the legalities of the specific manner of nailing. Finally I could derive a consistent pattern with the help of pictures of the "Colin Archer" (RS1) - "Stavanger's" nails are hard to locate on the nearly black deck.

 

post-14773-0-52362200-1445717437_thumb.jpg post-14773-0-02452000-1445717443_thumb.jpg

 

post-14773-0-11580000-1445717439_thumb.jpg post-14773-0-61879400-1445717440_thumb.jpg

 

post-14773-0-81670400-1445717441_thumb.jpg post-14773-0-47593000-1445717442_thumb.jpg

 

Til soon,
Mike

current scratch build 1:15

 

Colin Archer - RS14 "Stavanger"

Link to comment
Share on other sites

... first I have yet milled the longitudinal joints.

 

To this, I have modified a protective cap and abused it as a milling attachment  ;) . The milling guide is temporarily fixed with double faced adhesive tape ...

 

... and finally the first nails!

 

post-14773-0-85289800-1445718873_thumb.jpg

 

post-14773-0-99895800-1445718919_thumb.jpg post-14773-0-77156800-1445718969_thumb.jpg

 

post-14773-0-63039900-1445718953_thumb.jpg post-14773-0-05181400-1445718903_thumb.jpg

 

post-14773-0-27643200-1445718986_thumb.jpg post-14773-0-51784400-1445718889_thumb.jpg

 

post-14773-0-07137600-1445718937_thumb.jpg

 

All the best,

Mike

Edited by mikegerber

current scratch build 1:15

 

Colin Archer - RS14 "Stavanger"

Link to comment
Share on other sites

She is looking great Mike.. Awsome job on the treenails!!

 

Cheers

Dimitris

Current Build: Amerigo Vespucci -Mantua- 1:100 scale

 

Completed Build logs: Bluenose II AL 1:75 scale

 

Gallery: Bluenose II AL 1:75 scale

 

Future Build: Royal Caroline -Panart- 1:47 scale

 

 

 

 

 

 

Link to comment
Share on other sites

Mike, I just found this post and log because you used Colin Archer in the post title.  First off, its a beautiful and exquisitely crafted model so far and promises to be a real show piece.  I'll be following it closely.

 

Reason for my particular interest is that I used to sail two different double enders (Baba 30 designed by Robert Perry and a Pacific Seacraft 25 designed by Henry Mohrschladt) and your build comes as close to those designs as I've yet to see on a log.  I've been contemplating trying to build one or both of my former vessels from scratch and maybe with modifications I can get the structural part done by following some of your steps.  Deck plan and rigging I suppose would be from my own pictures.

 

Thanks for sharing your work with us.  Its always exciting to see someone's work that fits in with what I'm doing or thinking.

Link to comment
Share on other sites

well done again Mike,

 

I like the way you are adept at using technology, & without losing the craft of your work.

 

Absolutely lovely looking yacht & model.

 

MP

Link to comment
Share on other sites

@Dimitris, @Marc

Thank you very much your faithful and cherished companion!

 

@Captain Al

Thanks for your visit and welcome on board. Thank you also for such a nice feedback - very much appreciated!

 

I also think that Baba 20 and Pacific Seacraft 25 are both interesting modern CA-adaptations - they both were unknown to me, but I've done instantly some researches on the Internet.

 

What is so fascinating to me about double ender? Of course, the legendary seaworthiness, what is a highly design integral fact of this boats but also their prototypical appearance - it seems as they were drawn by children - a kind of Noah's Ark.

 

It would be a pleasure to see a scratch build of one of your mentioned boats ...  :) 

 

All the best,

Mike

Edited by mikegerber

current scratch build 1:15

 

Colin Archer - RS14 "Stavanger"

Link to comment
Share on other sites

Very nice and neat work Mike,

 

the standing treenails remind me of the fresh harvested cornfields (Maisfelder)  I saw, when walking the dog this morning

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Patrick, Nils – thank you guys! ...

... and thanks everyone who visiting and tracking this workshop. Always greatly appreciated!

 

Below you will find the next intermediate stage after sanding.

 

post-14773-0-95077200-1445974114_thumb.jpg

 

post-14773-0-15586400-1445974055_thumb.jpg post-14773-0-36878100-1445974069_thumb.jpg

 

post-14773-0-73878600-1445974081_thumb.jpg post-14773-0-16990600-1445974098_thumb.jpg

 

All the best,
Mike

current scratch build 1:15

 

Colin Archer - RS14 "Stavanger"

Link to comment
Share on other sites

Mike What a great job on the deck work. The soft curves attribute to your skill and craftsmanship.

 

Michael

Current builds  Bristol Pilot Cutter 1:8;      Skipjack 19 foot Launch 1:8;       Herreshoff Buzzards Bay 14 1:8

Other projects  Pilot Cutter 1:500 ;   Maria, 1:2  Now just a memory    

Future model Gill Smith Catboat Pauline 1:8

Finished projects  A Bassett Lowke steamship Albertic 1:100  

 

Anything you can imagine is possible, when you put your mind to it.

Link to comment
Share on other sites

You're doing such a good job.  We can already see what a fine lady she will be.

 

Bob

Every build is a learning experience.

 

Current build:  SS_ Mariefred

 

Completed builds:  US Coast Guard Pequot   Friendship-sloop,  Schooner Lettie-G.-Howard,   Spray,   Grand-Banks-dory

                                                a gaff rigged yawl,  HOGA (YT-146),  Int'l Dragon Class II,   Two Edwardian Launches 

 

In the Gallery:   Catboat,   International-Dragon-Class,   Spray

Link to comment
Share on other sites

  • 4 months later...

Patrick, Nils – thank you guys! ...

... and thanks everyone who visiting and tracking this workshop. Always greatly appreciated!

 

Below you will find the next intermediate stage after sanding.

 

attachicon.gifIMG_1827.jpg

 

attachicon.gifIMG_1824.JPG attachicon.gifIMG_1825.JPG

 

attachicon.gifIMG_1828.JPG attachicon.gifIMG_1820.jpg

 

All the best,

Mike

 

 

 

Hi Mike

 

Long time, no hear!  I'm just wondering how you're going and if you've been able to get back to your Colin Archer lately?

 

Cheers

 

Patrick

Link to comment
Share on other sites

  • 3 years later...
  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...