Jump to content

Constitution by Geoff Matson - Model Shipways 2040 - 1/76 scale


Recommended Posts

My name is Geoff and I have been building the MS Constitution. I basically followed Bob Hunts practicum. I am now ready to begin the masting and rigging part. I am very impressed with the other Constitution build logs and look forward to see them all develope Here are a few pictures of my progress so far. Thanks Geoff

post-747-0-74602700-1362358000.jpg

post-747-0-74751100-1362358018.jpg

post-747-0-52677400-1362358037.jpg

post-747-0-22143900-1362358059.jpg

post-747-0-01780400-1362358079.jpg

post-747-0-54674300-1362358095.jpg

post-747-0-95929200-1362358111.jpg

post-747-0-27529000-1362358127.jpg

Edited by Geoff Matson
Link to post
Share on other sites

Hey Jay good to hear from you

 

Right now I am working on the masts. I am adding a little detail to them like the pike racks, some sheves etc. I will post some photos soon. I think I am dragging my feet a little trying to avoid getting to the rigging to soon :D I will be posting some more pictures soon.

Link to post
Share on other sites

I am working on the lower masts and followed all the dimensions off the plans. The dowels supplied with the kit were not up to parr so I made my own out of square basswood stock. The square stock was chucked into my drill press and turned down to size. To simulate the iron bands and chaffing area I used styrene. I used CA to glue the styrene to the wood. The lower masts were then test on the ship and the caps dry fitted in place The lower mast will be painted white.

post-747-0-83202600-1362443292.jpg

post-747-0-33562000-1362443313.jpg

post-747-0-07918800-1362443330.jpg

post-747-0-63366600-1362443347.jpg

Edited by Geoff Matson
Link to post
Share on other sites

Geoff, nice work as always. As you show in your pictures, it is amazing what can be done with strips of white styrene strips for the bow, and in this case for the masts. You showed some, Bob R. has more on his build-log, and I have used it also. I like it.

 

Of course we know where the idea (at least for us) came from and I wonder if it might be of general interest here.
Have a go at it, please.

 

 

Link to post
Share on other sites

These are the parts for the thumb cleats with sheave blocks and installed

 

post-747-0-54088800-1362669396.jpg

 

post-747-0-83292400-1362669432.jpg

 

Here are the top mast netting and I used a bridal product called tulle to simulate the netting. I got it at a local craft store

 

post-747-0-21257000-1362669528.jpg

 

post-747-0-73329000-1362669554.jpg

 

Yea! I finally figured out to add text to my pictures :dancetl6: I promise my future posts will be better.

Edited by Geoff Matson
Link to post
Share on other sites

I plan to build the Conny in the next year or so and I am getting very envious of the skills I see displayed on all the build logs on this web site. I'll be following your log among the others I've chosen to teach me how it's done. Beautiful work!

Link to post
Share on other sites

Ok! I finally figured out the bowsprit. :dancetl6:

 

Only in ship modeling would you take a wood dowel and keep the top level the entire length. Then on the aft end make a slight taper on it. Then form a tennon on a angle cut while keeping the bottom level in the middle. Then on the bow end make a slight taper the goes from round to square and form a tennon on the end for the bow cap at an angle! :o

 

But I did it and here it is:

 

post-747-0-09305400-1363467084.jpg

 

post-747-0-90067700-1363467099.jpg

 

post-747-0-86117400-1363467110.jpg

 

Glad this part is done.

 

 

 

 

Edited by Geoff Matson
Link to post
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...