Revenge 1577 by xodar461 - FINISHED - Amati - Scale 1:64
Greetings. This is my first attempt at a build log, though it is far from being my first ship. Having recently finished HMS Kingfisher by LSS (see gallery), the Revenge caught my eye and I decided to have a go of it. For those of you who decide to follow along, please note that my work on models can be sporadic at times. I will try to post updates as I complete each page or 2 of the manual. Kit was ordered from Ages of Sail and here is what comes in the box.
Second planking now complete. the blue tape protects the wale from sanding. no stealers were used. the largest width amidships is 5 mm however at the stern, I used 1x7 mm swiss pear and trimmed it to the correct width.
After marking the waterline, painters tape applied to protect upper hull. Below the waterline will be painted white.
My ultimate plan is to display the model dropped into a sheet of 4 mm plexiglass which will be used as the base for water (ne
