Bluenose by bhermann - Model Shipways 2130 - 1:64
Welcome back everyone! I will get this restarted in a couple of days when I am back in town. In the meantime please PM me if you have a copy of any part of my log from before. The name change is due to my fat fingers when trying to register.
Thanks to Chucks fine work, I was able to retrieve my old name! Now I can move forward without getting confused about who I am!
There are three main goals in doing a build log for me. 1) it helps keep me motivated from time to time when the doldrum
I am going to start with adding the scuppers. At the time I remember being thrilled by figuring out any way to do this at all. I hope it may help someone down the line. I recall that the hull planks were 3/16". I found that using a 1/8" plank allowed the foredeck and quarterdeck scuppers to be cut from either side of a single plank. I then added a 1/16 plank above to complete the job. I was able to do this as my plan was to paint the hull. It would probably look strange on a natural wood