Hello,
I am seeking sources for very small nails or pins. I am modelling a lapstrake hull at 1:24.
The nail heads @1:1 are 10 mm and the roves on the interior of the hull 19 mm (~0.75" / ~3/8").
At 1:24 these would be 0.79 mm and 0.42 mm, respectively (0.031" / 0.016").
My intention is to use a nail or pin head to simulate the rove and cut/sand the shank flush with the hull to simulate the nail head. I'm confident the simulated roves will add proper detail to