The following is the reconstruction of my build logs for the Sherbourne following temporary loss of the Model Ship World Site in February 2013.
First posted May 6th 2012.
===
It started with a birthday present in January of £200 from my daughter. What could I possibly want that would have some meaning over the year? I suddenly remembered that as a younger chap I had really enjoyed rigging plastic model ships, and had had a long-time yearni
Windlass
Again, looking at the plans, and at Gregor’s excellent example, I thought I’d have some fun trying to make a windlass as per the plans from the NMM. I drew one up in TurboCAD, and took a strip of pear wood and marked out the octagon with dividers as shown in the picture.
I then made a jig with a Proxxon FET table saw. Luckily this saw can be tilted to 45o, so it was easy to cut two strips at that angle and lay them together as in the photo. The edges were planed off as