Home built disc sander

[Snowmans]

Here are the photos of my 200mm sander. Built this about 2 years ago. The motor was from work and going to be thrown away, so this was rescued. It came with the switch already in place. A base was built from scrap timber, and a backing plate from mdf. The table was from a spare melamine shelf with a window bracket for the angle adjustment. I can fit up to a 230mm sanding disc but only use 200mm as that is what I have. The photos show different stages of the sander, with the yellow backing plate the final color. There is also a 90 and 45 degree angle scribed into the table that cannot be seen in the photos. I am slowly working on a dust collector for this as it goes everywhere at the moment.