Ryland Craze
-
Posts
1,476 -
Joined
-
Last visited
Community Answers
-
Ryland Craze's post in How to find a person’s build logs was marked as the answer
In the Search box, click on the search icon. This will open up the "advanced" search page. Enter the member name you are searching for in the search term box and check "Content titles only"in the find result in... area. This will bring up build logs for the member your are searching for.
-
Ryland Craze's post in How to straighten a Bent keel was marked as the answer
I did not completely fill in the space between the bulkheads, I planked over what you see in the picture. I did not varnish any of the wood. I believe it is the lighting that makes it darker. Here is another picture where I used more lighting:
Notice that I used a black felt tip marker on the outer edges of the bulkheads. This let me know that when I faired the bulkheads, as long as I had some black remaining on the edge of the bulkhead, I knew that I had not over faired them.
-
Ryland Craze's post in Octagon 7 10 7 ratio calculator? was marked as the answer
Glenn,
I have attached a 7-10-7 Template PDF that may be of some help for you.
7-10-7.pdf
Also, check out this post. I found it very helpful. Dunbrody explains in detail how he makes masts out of square stock.
-
Ryland Craze's post in Pin Vise vs. Hand Vise? was marked as the answer
This was the first pin vise that I purchased 25 years ago and I still use it: https://www.ottofrei.com/products/swivel-head-pin-vise
I also have this set that I also use: https://www.ottofrei.com/products/pin-vise-set-of-4-range-0-0mm-to-4-8mm
I mainly use the smaller ones that hold my #61 to #80 mini drill bits.
Our Emblem ®
