brobertson
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Posts posted by brobertson
-
-
I used a scroll saw and sandpaper to fashion the rail.
-
-
-
I am new to tall ship modeling and have started a Flying Fish kit. I need to fashion the knighthead but cannot figure it out from the manual or plans. Any ideas or help?
Knighthead
in Building, Framing, Planking and plating a ships hull and deck
Posted
I traced it directly off the plans and then cut out a pattern from a fairly rigid piece of poster board. I then traced the outline on a piece of basswood of proper thickness which I purchased at a local craft's store. I then used the scroll saw to cut out the rail and I fit it to the hull with sandpaper and a very sharp Exacto knife. The outboard edge of the rail needs to be angled to conform to the curve of the hull. You can eyeball the edge angle by comparing to the curve of the bulkheads and carry that curve up the edge of the rail (before you glue it in place!).