Skip C

Hi Maureen, I do not have any models unfortunaltly. I am still working on this on. Which only exists on paper at the moment. I do have quite a few rare post cards of the Nantasket. I also have a painting that I had commisioned by a local artist. If any of that interests you let me know. I live in Stoughton now, so not far.

Kind of like this. This is just a quick proof of concept. Do you guys have any tips on figuring out deck camber? I think I have a photo of the original ship that shows the camber. Thanks!!! This is getting good now.

I figured out the curved transom. Now I have what essentialy is my cutting tool. I will use this hull form to cut out all the frames... I hope!!! I watched a tutorial online where a guy does this to make an airplane wing, so I think it will work for ships frames. I should have it done this weekend.

So even though the loft looked good before, there were a few issues that needed to be addressed. I spent 5 hours yesterday fixing all the lofting issues, and modeling the Transom. At one point I didn't think I was going to figure it out. Although it looks simple, it was a bear in Fusion to get right. I would still like to tweak it a little. It is a bit square, and I would like it to terminate with a little more rounded end. But for all intents and purposes it is ok. I can focus my attentions on getting the real model correct, I think that is more important.

Thank you!!! That will be a big help. That is very similar to what I am building. I hope to have something to show you guys in a few days. I am going to study your photos tonight after work.

My Plans do not show much.

I opened the hull up to see inside. I think I will start on the sternpost next. That might help with getting the transom correct... What do you guys think?

1st attempt at lofting this hull. I am getting excited. I have tried to model this 5 times before, and this is the 1st time I lofted something that is acceptable. I do believe I can create some frame templates from this. Now I need to work on the aft deadwood section, and I am having a little difficultly with the transom, but I think I will be able to work it out. It should be interesting to see where this goes, as I have never gotten this far with the model. I always get stuck with the lofting process. (That is Fusion 360 Lofting, not actual ships lines lofting..." 😁

Here are a couple of better pics of the "Nantasket"... I have also began collecting post cards of her. I believe one of them shows her under the Brooklyn Bridge.

Hello everyone. I would like to introduce myself. I am a 44 year old recovering alcoholic with 5 years sobriety. Many great things have happened as a result. (If there is anyone out there struggling with addiction, just know there is a better life out there if you really want it). One of those great things was that many of my old interests and hobbies started coming back to the forefront, and one of them was my love of ships. Ever since my Grandmother first told me of the Titanic, I was hooked on ships and shipwrecks. paired with a passion for the ocean, specifically Nantasket beach since I grew up there. (I moved to Hull, Massachusetts in 1984, just in time to watch them tear down the beloved "Paragon Park") So one day at work I was just looking at a bunch of old photos of old Nantasket beach, and I began to come across photos of the old steamboats that once serviced the area. Hull being a summer resort town, and during the turn of the last century there were many Steamboats that ferried people to and from Boston and the surrounding areas... So that's when I got the Idea that I would like to model one of these steamboats, but which one. There were so many... The SS Rose Standish, The SS Betty Alden, The SS Mayflower, The SS Town of Hull. But the one boat that really captured me was the SS Nantasket. Her beautiful lines, and ornate paddle box, really make her something to see. The beginning stages of research were not as easy as I initially though. It took me a while to figure out that there were actually at least to my knowledge four paddle steamers named "Nantasket". I set my focus on the second Steamer to carry that name. She was built by the shipbuilding company Montgomery and Howard in Chelsea, Massachusetts in 1878 for the Hingham, Hull, and Downer's Landing Steamboat company. I do not have the exact numbers in front of me at the moment, but I believe she was 174.5' from Stem to Stern, 28' beam, and 9' draft wooden hull, single cylinder vertical (walking) beam steam engine. She was later sold to some company who ran her in the Sag Harbor area of New York, or New Jersey. I believe in 1910 she was sold again to the Keansburg Steamboat Co. and renamed SS Keansburg. Sadly she succumbed to a dock fire on April 16, 1928. I apologize if this post is getting long winded. One of my other hobbies is 3D modelling. I have dabbled a little over the years, tinkering with Bryce, Blender, etc. I picked up a 3D resin printer last year to create miniatures for Dungeons and Dragons, so naturally when the thought of modelling a ship came to mind, I knew I had to incorporate that into this build. So in anticipation I began to learn and teach myself Fusion 360. I have been at it for a little over a year now, and would like to show you all what I have so far. Keep in mind that I have also been reading antique books on ship building, and also taught myself how to read ships plans. I would also like to thank a member of this forum who started a similar project, and who was the inspiration for this project, The Hull from these two boats are very similar, and there being no plans available of the Nantasket, I have decided to use these as a base.: 3-D Armenia by SalD – Hudson River Sidewheeler, 1847 https://modelshipworld.com/search/?q=armenia&quick=1 From his post I was able to find out that a copy of the plans he was using actually came from an issue of "Steamboat Bill" magazine from 1956. So after five failed attempts, this is my sixth iteration. I plan to model this project in 3D, and use Fusion to create the parts I need. I plan on purchasing a CNC router in the near future, so I will have that at my disposal as well. I look forward to meeting you all, and look forward to documenting my build here on the forum. Thank you!!! Skip