Check out our new MSW Sponsor Innocraftsman
×
Deutz_RVBM_545
-
Posts
6 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Deutz_RVBM_545
-
So...life got in way and I didn't do any work on the model. But, I did finish the keel and using duct tape, I got the hull. And that's where it left off. Yesterday, I finally got to applying filler and sanding it. The hull came out badly; when I made the ribs, they were all over the place. It was my first time doing this, and it really showed. But, I pressed on - I have to learn the ropes of this hobby somehow. I should also mention - it was my first time using bondo, so it looked like a disaster. I am a clumsy person, and the hull shows it. Now, the next step will be the deck and the superstructure; I am going to solve the deck problem with expanding foam - first apply something so that the foam doesn't stick to the hull on the inside, then apply foam, after that when it expands, cut it so it matches the deck, remove it, apply fiberglass, sand it, and then make holes for the RC and other electronics.
-
Hi, The company you're thinking of is JADROlinija, the company still exists today, and they operate ferries. People often confuse Jugolinija and Jadrolinija. This is "Opatija" during the 60's.
-
And so, atleast at the time of writing this, (22nd Nov 2024) is it. Will update the topic when I start to do more work. Until then, bye!
-
Next step was to make the keel. I am using 6mm plywood left over from some other project. You can see the the keel cut away and ready to be sanded here, and the lines plan too:
-
So, here we go. Picture 1 shows M/V "Pobjeda", translated to "Victory" from Croatian. She is a 2500 DWT general cargo ship built in 1958. She is 94.5m long, 13.3 wide, and 10.05 meters deep. She worked for the company "Jugolinija", aka Yugoslavian Shipping Line, based in Rijeka, Croatia. She was scrapped in 1981. After acquiring the plans from the shipyard itself (3.Maj Shipyard, Rijeka, Croatia), I started to do planning - R/C components, battery, receiever, motor, and servo for the rudder, the scale - which in this case is 1:100. The lines plan itself is 1:100 so that makes it a lot easier.
-
Hello, my name is Antonio, but you can call me Toni. I am 22 years old, first-time builder, but have been interested in model ship building since I was a small kid. Since my father made a "model" of a tanker ship when I was just 7 years old, watching him made me want to make my own model and develop my own skills, but sadly, I never really got into it. Now, at 22, I think I'll have a nice "weekend" hobby to play with. I have managed to acquire some blueprints from a local shipyard here in Croatia (yes, I am from the far country of Croatia!), which in my model ship building club is considered "a miracle", mainly because privatized shipyards don't want to give out the plans for ship just like "that"...but anyhow, I am planning to make a R/C model of one small ship from 1958, made in Yugoslavia, of course. I have made the proper preparations so far and I looking forward to making that model. Excuse my English if it isn't perfect! P.S. If you're wandering about my username / nick, it's one of my favorite marine engines in existence - the Deutz RVBM 545!
Our Emblem ®
