HMS Victory (and probably others) 1:100 scale rigols

[Tillsbury]

Just getting started here, but I've found these two prints very useful for my 1:100 Victory and of course they could always be rescaled if desired.  The prints have integral supports and a base plate including something to hold it by.  You can just load the STL directly to your printer's software and hit the print button.  They have 20 of each in the file, you will need two of each (which you could easily print in one go).  Set your printer to a fairly high resolution, at least 0.05mm layer hight.  The photo shows a part-used stack of each, printed on a very very cheap very old printer, so you should get better results than me.  And a close-up of the parts installed and with a first coat of primer.

 

Hope they're useful to someone...

Rigols curly.stl Rigols round.stl