Jump to content

Recommended Posts

Hi,

Currently working on my Sakonnet Daysailer and started painting the hull. Having a bit of trouble with the waterline template though. It's printed out on the kit supplied plan. So I made a few photocopies. But after cutting out the template on one sheet it didn't sit right on the hull and I knew I wouldn't get an accurate freehand line that way. I tried framing out another sheet by taping strips of wood but that just warped on me.

I may try cardboard next or just use the dimensions from the profile view in the plans and go from there. I'll figure it out, I guess, but any hints, tips or suggestions are welcomed.

Also, what's the best way to mark the WL? I know graphite shows through paint and I'd rather not scribe. Was thinking of using a pastel pencil that matches the color below the WL.

 

Thanks,

Phil

Link to comment
Share on other sites

Hi Phil

I am working on the Niagara which has a painted hull

I measured the position of the waterline off the plans and then

used Tamiya masking tape top and bottom to  define the waterline

And then painted it in

Hope this helps

 

Regards

Ken

Under construction  US Brig Niagara

 

Completed  HMB Endeavour - Caldercraft

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...