Barbara
-
Posts
43 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Barbara
-
Does anyone know how to rig a becket on the bluejacket double block? They are pretty small, thanks, Barbara
-
Does anyone have a clear drawing or photo of the bilge pump assembly as my instruction book diagram is of poor. quality. thanks,Barbara-
- 1
-
-
Does anyone have experience with the photo cd for this kit ? thanks Barbara
-
- 1
-
-
George are you going to continue your log, I. Will. Follow your lead as I did on the. Flying fish thanks , BarbRa
-
What is the preferred knot to attach ratlines? thanks , Barb
-
I am building the modelshipways flying fish and am having trouble finding the lower mast heights and dimensions from the plans. I have built other modelshipways kits and they showed three separate parts. I can’t locate them on the. Plans. thanks for. Your help, Barb
-
I am looking for suggestions for connecting the deadeye to the chain plate, thank you , Barb
-
Yes ,I am. Looking for a hand held power device, like a dremel but able to take small bits
-
I am a ship modeler looking for a recomendation for a good portable drill for use with small bits on both wood and brass, thank you, Barb
-
I am. Having trouble figuring the main mizzenmast and forward. Mast lengths from the plans, and putting it at scale length, I would appreciate any input
-
Thank you ,I can not locate the futtock band in the parts ,I have the span collar and hinge, thanks for your help
-
Can anyone help me with tthe main truss rigging on Charles morgan. Model expo? Thanks
-
How do you rig the double mainstay on Charles Morgan…? Thanks
- 1 reply
-
- 1
-
-
Does anyone have a clear diagram or photo for the steering gear and rigging on the Charles F Morgan on the modelshipways. kit ? Thank you
-
Friends, is there a tutorial on plating? Thanks,Baerb
-
What is a good way to paint the ship ways to make them look weathered? Thanks
-
Stain color
Barbara replied to Barbara's topic in Painting, finishing and weathering products and techniques
Deck only. Thanks -
Can anyone make a recommendation for a minwax stain color for my pride of baltimore model expo kit ? thanks. Barb
-
What plank width should I use for belt a and b the 3/16 looks too wide for the tick marks on my planking layout. I am planking the model shipway kit pride of baltimore . Thanks barb
-
I am about to begin the model shipways pride of Baltimore, can anyone recommend a good build log to follow? Thanks Barbara
-
How are the blocks rigged for the quarter boat lifts? Thanks
-
I am rigging model shipways constitution. I notice a difference in location of topsail between plan and picture on instructions. I am also following a build log that shows a different location.The print shows rigged with sails. I am rigging without sails .topgallant and royal also have different locations. Thanks
- 1 reply
-
- 1
-
-
Can anyone help with rigging the sheet on model shipway constitution without sails. Regards
-
I think I am referring to the reef tackle . It looks like the start of which is under the fighting platform. Thanks
-
Does anyone know. Where the reef line originates from for the lower crossjack on modelshipways constitution ? Thanks. Barbara
Our Emblem ®
