-
Posts
2,305 -
Joined
-
Last visited
Reputation Activity
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
I hope that's what you mean:
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello friends,
thank you for the kind words.
Meanwhile I have already mounted 4 carronades.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hallo,
thanks for the nice comments.
Currently, the brass parts of the carronades are burnished.
Here is a photo of a carronade with all parts before assembly.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
this carronades are smaller than most people think it ...
Look for yourself ...
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
the straightening rod from the carronade was secured with a chain.
For this I used a ready-made micro chain of copper wire 0.20 mm.
The ring bolts are made from brass wire 0.25 mm.
Here are some pictures that show these chains.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
many thanks for the nice comments.
Today I will show how the target device of the carronade is made.
The pictures illustrate the process.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
I show here a few impressions of the carronades:
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Many Thanks Karl.
Hello Dear Friends,
gun locks were also used to fire the carronades.
The rifle lock was fastened with a thumb screw.
Later percussion locks came into use.
The next picture shows one of the 1849.
The production of the carronades of La Creole continues steadily.
Here is a short update:
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
here is a short update:
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
here are a few more images for the production of carronades ...
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Continued ...
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello Ferit,
thank you for your nice comment.
With a few pictures I explain today the soldering of the Flanges on the tube of the carronades.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello modelers,
thank you for the nice comments and the motivating words.
Here is a small update of the report on the construction of Carronades.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
many thanks for your nice comments!
Here are some photos for making the carronades pipe supports.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
many thanks for the nice comments.
It must be made a total of 120 square bolt guns for the carronades.
These are made of brass.
The pictures clearly show the manufacturing process.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hi Ayutansin,
many thanks for your nice comment.
Here an update for building of the carronades.
The guide pins on the top of the sliding carriage carronades is made of brass.
Here some images of explaining the process of manufacture.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
more pictures of the construction progress of the carronades:
Here the rings for breech rope are made:
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
further I will show you how to make the pivot joints for the carriages of Carronaden.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello Dear Friends,
Thank you for the motivating comments.
Here is an update of my Report.
It's about the manufacturing of gun carriages for the carronades.
These are made of serviceberry.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
here an update ...
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hi Karl,
Thanks for the nice comment.
And here's a little update.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello,
here I show the continuation of the production of Caronades.
The supports for the gun barrels are made of brass precision casting.
I have the Carronade only temporarily installed to see whether the parts fit.
Later, the brass parts are still blackened.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello friends,
Thanks for the nice comments.
Here are some pictures of the current state for manufacturing of carronaden.
We'll see you again soon.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
Hello Dear Friends, the main armament of the la creole consisted of 20 30-pounder carronades.
First I made a prototype, gonna learn how to make all the parts I need.
The production of the prototype can be seen in the following images.
I hope that you enjoy it.
Soon I will show you more pictures of the finished Carronade.
-
NMBROOK reacted to archjofo in La Créole 1827 by archjofo - Scale 1/48 - French corvette
@ jaerschen
Thanks for the nice comment.
Hello,
in supplement to my previous reporting, I show still images to the
suction strainer with pipe for the small seawater pump.