vladislemm
-
Posts
28 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by vladislemm
-
Continue planking the hull inner space.
-
The keel and stem fell into place, and I began to sheathe the side air boxes.
-
I broke down the technological parts of the frame. The boat hull has become very light!
-
I finished the horizontal planks.
-
Cutter dimension: length - 359 mm, width - 92 mm, нeight - 141 mm (with flagstaff)
-
Hello everyone! I began to lay the horizontal planks of the hull.
-
The holidays are over! Finished the diagonal planks.
-
Friends, I wish you all a Happy New Year!!!😉
-
Almost finished diagonal planks.
-
It is designed for covering the hulls of boats, which should have the greatest transverse and longitudinal strength.
-
Yes! Laying the planks on the model completely repeats the real prototype - two layers, the first diagonal, the second longitudinal. Below is a drawing from a similar steam cutter.
-
I continue to lay the diagonal planks. Moving from the center to the bow and stern.
-
I started laying the diagonal planks - anegri wood
-
I glued the branches of the frames in two layers of 0.6 mm veneer and glued them to the power parts.
-
Completed the frames of the hull and tied it with a keel bar
-
Still assembling the frame of steam cutter
-
I continue to assemble the frame of cutter hull
-
1: 72 and 1: 100 scales are very small for such boats.
-
I really like steam and rowing cutter and longboats, and it is a pity that there are not enough wooden kit models in this direction.
-
Yes, this steam cutter has 2 layers of planks: diagonal and longitudinal. Both layers will be present in the model.
-
The beginning of the steam cutter model assembly - hull frames, bow part.
-
Welcome to the build topic https://modelshipworld.com/topic/26869-28-foot-steam-cutter-on-the-james-white-system-1876-piroscafco-scale-models-124-by-vladislav-lemm/
Our Emblem ®
