Greg G
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Greg G
-
The shaft is only for support for printing and can be cut off . If you try to print the Rivets or bolts with out the support you will have a elephant foot . And have a lot of work to remove it of each one .
- 418 replies
-
- 2
-
-
- Large scale model ship
- 1/35 scale model
- (and 17 more)
-
This may help you as well desing rules.pdf
- 418 replies
-
- 1
-
-
- Large scale model ship
- 1/35 scale model
- (and 17 more)
-
Yes you can . Draw a box 2mm high and as long as you need then add a post no smaller than .5mm it also needs to be about 2mm high . Now draw the Rivets or round head on the top of the post .The post will be cut off the 2mm box . Print it flat on the build plate Just a note don't fill up your build plate
- 418 replies
-
- 1
-
-
- Large scale model ship
- 1/35 scale model
- (and 17 more)
-
Only 300 odd windows to make .Lucky you don't have to cut them by hand it would take for ever . Looks very good done on your CNC and will save you a lot of time .
- 418 replies
-
- 1
-
-
- Large scale model ship
- 1/35 scale model
- (and 17 more)
-
Look at my post .I had to download the free VLC media player to get the sound to work .
-
Thank you very much Richard . I download the file and it all work fine. I did have to download VLC media player to get the sound as the windows 10 media player would not play the sound recording . That maybe just me .The recording is a big help to me on doing the Pevensey hull . Greg
-
Hi Richard Any update on the recording .
-
You can just spray it with two light cost of White Knight Crystal Clear Spray Paint . It has to be a very l light costs . Or Micador for Artists Crystal Clear Spray from Officeworks
- 418 replies
-
- 2
-
-
- Large scale model ship
- 1/35 scale model
- (and 17 more)
-
Thank you Richard for all the hard work and help today. The way you showed us Riho looks a lot easier to use than Fusion 360 . Now I just have to wait for the video to downloaded to go over it step by step . Greg
-
I all set for tomorrow the 23 /12 /2021 at 6:00 AM Brisbane time . I have Zoom and Rhino 7 in stalled now Looking forward in get to work with Richard's training workshop. I will be nice to see what you can to do with Rhino 7. I have to say a big thank you to Richard for doing this training workshop for us guy's that are just starting in CAD Greg
-
Doing the P.S. Pevensey in Fusion 360
Greg G replied to Greg G's topic in CAD and 3D Modelling/Drafting Plans with Software
fnkershner the add in Slicer no longer supported as a add in from the app store -
Doing the P.S. Pevensey in Fusion 360
Greg G replied to Greg G's topic in CAD and 3D Modelling/Drafting Plans with Software
I just redid it after looking at Fusion 360 NewbiesPlus YouTube videos again . He is a big help for Fusion 360 users .Now to work on the deck before starting the frames/Bulkheads . I also have to do the same for the P.S.Oscar W for a mate .
-
Doing the P.S. Pevensey in Fusion 360
Greg G replied to Greg G's topic in CAD and 3D Modelling/Drafting Plans with Software
I think I workout how to do the lofting in Fusion .Now to make it one body and do the new frame to be cut .
-
Looking forward to this I have Rhino V4 and fusion 360 and need all the help I can get .
-
The plans are from Float a Boat in Vic Australia . The P.S. Pevensey is an Australian River Steamer and is based at Echuca on the Murray River. This makes it hard to get photos and measurements as I live in Queensland .Just a bit to far to drive . I will be doing it 1/24 scale as per the plans This is my first time trying to do a hull in Fusion 360 . I may need some help with Fusion 360 . I have worked out how to all the bulkheads/frames and waterline plus deck lines . I can't workout how to do the lines shown in the top view or do I need to do them I would like to add more bulkheads/frames for cutting the parts out on a CNC router .
-
Thank you all for the warm welcome .
-
Sorry Charlie .I grew up in Sydney and moved to Queensland back in 2001 .As far my knowledge of the Torres Straight and types of vessels It is very little and would be just what I can find on Google .
-
Hi I'm from Queensland Australia . I now retied and have time to get back in model ship building again . I'm starting of with a 1/24 scale Murray Paddlesteamer P.S . Pevensey also known as the "Philadelphia " from The television mini-series 'All the Rivers Run' . I have a set of the drawings from Float A Boat in Melbourne. and will try to do the parts in Fusion 360 for CNC cutting and 3D printing . Still learning Fusion 360 So it should be fun to learn what to do in Fusion 360 for a old guy like me . I hope to get some tips on what to do here . Greg
-
Hi I'm from Queensland Australia .
I now retied and have time to get back in model ship building again .
I'm starting of with a 1/24 scale Murray Paddlesteamer P.S . Pevensey also known as the "Philadelphia " from The television mini-series 'All the Rivers Run' .
I have a set of the drawings from Float A Boat in Melbourne.
and will try to do the parts in Fusion 360 for CNC cutting and 3D printing .
Still learning Fusion 360
So it should be fun to learn what to do in Fusion 360 for a old guy like me .
I hope to get some tips on what to do here .
Greg
Our Emblem ®
