syartbox

sorry, I could not open your e-book to see how the cannon is, so, I have to guess. You might use CNC way to make your cannon which pls see my photo, if you feel the size of cannon is ok, I am able to give you some. Re the casting, I need details to make the mould, it will be some cost should be. Anyway, I will bing to make the casting cannon and anchor from next month, (it would tks for Werner's help, he gave me more information).

if it is possilbe, pls have my email address (e-mail adres removed by moderator), if you can send your size requirement, qty ect, i might can know the cost, and I can send some photo to you for your information.

If you can send me a 3d file, I might can help you.

SY

Hi Bill

let me to know the details, cnc or casting is all workable.

best wishes

sy

Looking for a source for either shipyard or nautical (19th to early 20th century) figures.  My model is 1" = 32" scale = figures would ideally be between 2" & 2.25" in height.  Any idea where I can find some?

 

Many thanks!

pls take look this website:http://shop.princeaugust.ie/25mm-scale-moulds/

Dear DAniel:

Tks for your help, it is sad I could not visit Museum, so, on information in my hand, if anyone can give me a nice photo, I am able to produce it.

best wishes

sy

Looking for a source for either shipyard or nautical (19th to early 20th century) figures.  My model is 1" = 32" scale = figures would ideally be between 2" & 2.25" in height.  Any idea where I can find some?

 

Many thanks!

PM me the information, I am able to help you, I am very specail on it, pls see my topic "casting cannon", I put a photo on it which is victory's figures, 8-10cm long. 1:75 use.

best wishes

sy

HI Werner:

Tks for your kind words, yes, the size is for 1:75 Victory use, we original made it at 3years before, we did not make it about 1year, so, I could not remeber the size of figure, maybe 8-10cm, later, I try to find the photo of finished prodcut for your information.

For casting, frist at all, we will make a wax mould which is as photo showed, then, we are casting it by brass. We have good knowledge on it, we can make the design on right size in one time.

Now, I am looking for some information for cannon, this is my purpose in this year.

best wishes

sy

tks, we also have the Hms warrior's Figurehead by brass casting, later, I will put it on.

sy

Tks Antony， I know it now, pls see the photo of my product

Could you psl teach me how put the photo on website, tks.

best wishes

sy

Dear Werner:

Tks for your information, I will go to see it.

Best wishes

sy

Dear Antony:

Tks for your advice, pls call me SY, tks.

To be honest, I am a parts marker, I am very specail on brass product, casting/etching/pressing product, becasue I think brass is a valueable materail then rise the model's price, also, the old cannon is made by brass, if I use brass to cast it, it might 100% return what is it.

The size, frist, I want to make 50-55mm long, if it is workable, I might make some small or bigger, such as 38,45mm or 100,150mm.

In the market, I can find some cannon which made by CNC, you know, these product is without the decoration, it is feel so cheaper, what my problem is I am not able to find the decoration's plan at Internet, do you know where I can buy these plan?

By the way, I made good type of ship Figurehead.

Tks for your help,

SY

also, 18 Century's cannon is ok too, tks.

Dear All:

I am new one for this website, but, I am a ship builder, I want to make some kind of cannon by casting to myself, such as English/Spanish/French/Russian for 16-17 Century, if some one has the plan/picture/draw to supply me, it will be tks, or I buy it. tks for your help.