Search the Community
Showing results for tags 'logs'.
-
I received an email today from the New Bedford whaling museum. They have put together a data base of American whaling voyages. It is an amazing collection of data. Voyages, logs, crew members, etc. Searchable in many different ways. The data base seems to be huge. I just stared poking around and the info is great to anyone interested in whaling history. Here's a link to the PDF about the data base Whaling History pdf ..And here's the site. The data takes some time to load. Give it a minute. I have just started to scratch the surface of what is avialable here. It's a little tough to navigate, but worth the effort.
-
Hi This post is about how I mill small dry pieces of wood in the round. I am milling a piece of boxwood in this example. Boxwood comes from small trees and is not generally available in large amounts. I bought a 5' limb 3-4"s in diameter. The wood was sold by the pound, ouch!Box, as it is often called, is very dense including the end grain. The wood generally does not split or chip. I am going to use the wood for blocks. Adding photos and will be back to add the words later via edits. Photo 1 The first step is to mill a piece of wood 2' square by 14 incles long which will be used as a sled. My Nanook is a thousand pound gal named nanooo. She's always hanging around the boatyard checking things out. Must be an orphan. She has a cub some where around the yard as well. Photo 2 The limb is 10" long and on;ly serveral inches in diameter.....hard as a brick! Photo 3 Imagine the limb in this photo is round. First thing I did was to plane a flat surface the the length of the piece of wood until the flat was about 1/2' wide. I then used CA slow drying glue to mate the flat to the sled. Photo 4 Here you can see the wood mated to the sled. I have milled some slabs from the piece. Please note, for safety, the sled is made longer than the wood being milled. This allows the limb to pass through the blade while my fingers are well away from danger. Photo 5 Photo shows a milled slab. Next step is to run the slab through my Brynes thickness sander on both sides, and then finish sand it to the correct thickness, e.g., 3.mm. After reaching the desired thinkness I will cut the material into planks, etc., on my Brynes table saw. One must be very careful when using the process shown above. Always use a push stick and a feather board!!! For safety sake I have found it best to mill the entire piece of wood at once rather than to return and mill more of the same limb later. Wood moves and will loosen the bond of glue to the sled over time, beware! In place of super glue, one can put a few screws or, as Kip (sawdust) advises some dowel rods into the blank. Either approach would be more safe than ca glue. Feel free to post your comments and ideas here. BFN Cheers, Hopeful aka David “there is wisdom in many voices” Completed: Sharpie Schooner (Midwest) Posted in kit build section of forum Current: Sultana (MSW) Updating the build log and continuing on with the build Next: Lady Nelson (Amati Victory)
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.