PSF
-
Posts
106 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by PSF
-
continue to work ...
-
Installed a permanent lower and upper cheek (see Figure) from Yellow wood = Amaryl
-
It's time sets the anchors. This requires the marine rope. So I need to install on mechanism of winding marine rope (а) electric motor Here's what happened:
-
As always, the first test, and then ... The following photos are only the test These parts are not installed on the adhesive
-
installation hobnail into the side of the ship hobnail from brass wire 1. marking zones position for a hobnail from brass wire 2.made the tool installation for the hobnail from brass wire 3. To complete the installation the hobnail from brass wire has spent 2 weeks 3 hours per day
-
Certainly hard! With the help of Bor-machine (see photo) and burs for jewelers Of course, in one place of part broken. I glued it on the glue is already in place but if done carefully and cautiously, then happen without failure
-
trial version of the gun carriage
-
...bulkhead
-
windows are painted and installed window frames are made of yellow wood
-
set the upper balcony railing
-
установлены перила верхнего балкона
-
window from Kit improved window then will be painted in gold paint
-
The crossbar window is made of yellow wood. Glass from plastic from a floppy disk. The transom stern of blackened wood - hornbeam
-
Test window upper balcony
-
set improved decoration
-
Continued production of the end mill strips rubbing strake from blackened hornbeam
-
Two evenings cooking the end mills. Turned out one of the three necessary. The end mills produced relief strips rubbing strake
-
installation of railing
-
made a mistake, put away a lot of area balcony: the perimeter of the balcony <> perimeter railing way to fix on the photo
-
installed on ship hull pen of the rudder
-
installed hinges of the pen of the rudder ship
-
painted in black hinges of the rudder ship with a solution: chemical solution 25% ammonia (ammonia), 100 g / l to 1 l Copper carbonate (CuCO3) 40-200 g / l Instructions: http://shipmodeling.ru/content/tooling/брассблакинг2 Additional Information: http://shipmodeling.ru/phpbb/viewtopic.php?f=11&t=1599&p=161934 # p161934 parts have been cleaned with a hot solution of citric acid parts have been cleaned with a hot solution of citric acid
-
hinges of the rudder ship sharpening on the milling machine Proxxon M70, brass rod welded to a silver solder with a gas torch
-
another variant of the manufacture of hinges is the pen of a ship's steering wheel method of manufacture http://forum.modelsworld.ru/topic207.html
-
improved decoration on the stern of the ship
Our Emblem ®
