drhemlock2 Posted July 29, 2015 Share #1 Posted July 29, 2015 hi this is doc i hope to find out the measurements of a fully masted triton complete build as I need to figure out the size of a display case I will need and to design. please advise doc Link to comment Share on other sites More sharing options...
GLakie Posted July 29, 2015 Share #2 Posted July 29, 2015 There's just a little info missing here Doc. Are you building the case for someone else that has, or is building the ship? What scale is it, or will it be? Whoever it's for will have all that info, then build the case 2" higher, 4" wider, and 4" deeper than the dimensions of the ship. Cheers mtaylor 1 Link to comment Share on other sites More sharing options...
drhemlock2 Posted July 29, 2015 Author Share #3 Posted July 29, 2015 figured I would leave out or not make sense here. his is my problem I am building the triton 1/48 fully masted with rigging it will be on a slightly raised cradle. I am getting together the tools I need to make one and also the idea of what design I would like to use. I have seen some ideas on here but need the info for making the case hopefully someone has built her this way and perhaps could make some measurements for me. I would need a ball park figure and yes I am aware of the space needed on each side top, sides etc. thanks in advance doc Link to comment Share on other sites More sharing options...
Recommended Posts