hamilton Posted May 31, 2013 #1 Posted May 31, 2013 Hello there: I should probably know the answer to this question - so sorry in advance for block-headedness....but.... I posted a question here earlier about how to prevent bleeding between the above-waterline section of the hull on my HMS Blandford (stained) and the below waterlne section (painted tallow). I got a great description of a process from Randy (RNBrook). There he suggested that I first apply stain, then coat with a few coats of polyurethane, allowing this to dry thoroughly. Then sand with 320 grit paper. Then apply paint. Sounds good to me and this is the way I would like to go. Here's my question - the paints I use are Golden artist paints (acrylic), while the stain is (obviously) oil based....so - do I use an acrylic or an oil-based poly? I'm assuming acrylic (for the sake of the paint) but will this have any adverse effects on the finish of the stained sections? Again, I feel myself getting dumber even thinking about this question, but if anyone could set me straight I promise to be more thoughtful in the future! Thanks, hamilton Quote current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch) previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); MS Glad Tidings (1937) (in need of a refit); HMS Blandford (1719) from Corel HMS Greyhound; Fair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851); Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch) under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy
NMBROOK Posted May 31, 2013 #2 Posted May 31, 2013 Hi Hamilton, Oil based polyurethane.This goes over the stain, and the acrylic paint will go over the poly.The Oil based poly acts as a barrier coat between stain and paint.In the UK they are labelled either acrylic or polyurethane varnish.The acrylic based Isn't a true polyurethane. Kind Regards Nigel. Quote Currently working on Royal Caroline
NMBROOK Posted May 31, 2013 #3 Posted May 31, 2013 I would not use acrylic over oil based polyurethane. It can scratch off easily. I have never had a problem,however I always spray another coat of polyurethane over the lot, colour included,far more durable than acrylic on its own. Regards Nigel Quote Currently working on Royal Caroline
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.